Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Filter type: Filter Insert
- Height [mm]: 85
- Outer Diameter [mm]: 56.6
- Manufacturer: KAMOKA
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Filter Insert
- Height [mm]: 87
- Outer Diameter [mm]: 32
- Gasket inside diameter [mm]: 41
- Gasket outside diameter [mm]: 47
- Weight [kg]: 0.025
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Filter type: Pressure Filter,
Filter Insert -
Transmission Type: 7-
Speed Automatic Transmission - for OE number: 0CK 325 121 D
-
Fabrication Number: FSF-
AU- 016 - Manufacturer: NTY
-
Name: NTY FSF-
AU- 016
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission -
Filter type: Screen Filter,
Suction Filter - Housing Type: Synthetic Material Housing
-
Housing material: GRP
(Glass fibre Reinforced Plastic), PA 66 GF 30 - Consult accessories list for recommended additional repairs:
- Observe system fill quantity:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Vehicle Equipment: for vehicles with direct shift transmission
- Construction Year from: 01.2017
- Filter type: Filter Insert
- Outer Diameter [mm]: 34
- Inner Diameter [mm]: 17
- Height [mm]: 87
- Manufacturer: HENGST FILTRY
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Weight [kg]: 0.025
- Gasket inside diameter [mm]: 41
- Gasket outside diameter [mm]: 47
- Height [mm]: 87
- Outer Diameter [mm]: 32
- Filter type: Filter Insert
- Manufacturer: DENCKERMANN FILTRY
-
for PR number: 0CL,
0CJ, 0CK -
Transmission Type: 7-
Speed Dual- Clutch Transmission -
Supplementary Article/Supplementary Info: with gaskets/
seals - for OE number: 0CK325149D
- Alternative Repair Kit: 8020072
- Manufacturer: METZGER
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Filter Insert
- Height [mm]: 85
- Outer Diameter [mm]: 57
- Gasket inside diameter [mm]: 67
- Gasket outside diameter [mm]: 72
- Weight [kg]: 0.065
- Supplementary Article/Info 2: with seal ring
- Observe service information:
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Filter Insert
- Height [mm]: 85
- Outer Diameter [mm]: 57
- Gasket inside diameter [mm]: 67
- Gasket outside diameter [mm]: 72
- Weight [kg]: 0.065
- Supplementary Article/Info 2: with seal ring
- Name: SW 33 10 7766
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Weight [kg]: 0.065
- Gasket inside diameter [mm]: 67
- Gasket outside diameter [mm]: 72
- Height [mm]: 85
- Outer Diameter [mm]: 57
- Filter type: Filter Insert
- Manufacturer: DENCKERMANN FILTRY
- Filter type: Filter Insert
-
Fabrication Number: FSF-
AU- 014 - Manufacturer: NTY
-
Name: NTY FSF-
AU- 014
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Vehicle Equipment: for vehicles with direct shift transmission
- Construction Year from: 01.2017
- Filter type: Filter Insert
- Outer Diameter [mm]: 71.5
- Inner Diameter [mm]: 21.5
- Height [mm]: 85
- Manufacturer: HENGST FILTRY
-
Transmission Code: 0CJ,
0CL, DL382, 0CK - Vehicle Equipment: for vehicles with direct shift transmission
-
Filter type: Pressure Filter,
Filter Insert - Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
- for OE number: 0CK 325 149 D
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
for PR number: 0CL,
0CJ, 0CK -
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Suction Filter
- for OE number: 0CK325421A
- Alternative Repair Kit: 8020109
- Manufacturer: METZGER
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Vehicle Equipment: for vehicles with direct shift transmission
- Construction Year from: 01.2017
- Filter type: Filter Insert
- Length [mm]: 182
- Width [mm]: 71
- Height [mm]: 56
- Manufacturer: HENGST FILTRY
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Screen Filter
- Length [mm]: 162
- Width [mm]: 71
- Height [mm]: 56
- Weight [kg]: 0.11
- Supplementary Article/Info 2: with oil sump gasket
-
Manufacturer: FEBI-
FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Code: 0CJ,
0CL, DL382, 0CK - Vehicle Equipment: for vehicles with direct shift transmission
-
Filter type: Pressure Filter,
Filter Insert - Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
- for OE number: 0CK 325 121 D
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Filter type: Screen Filter
- Length [mm]: 162
- Width [mm]: 71
- Height [mm]: 56
- Weight [kg]: 0.11
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: BLUE PRINT
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Code: 0CJ,
0CL, DL382, 0CK - Vehicle Equipment: for vehicles with direct shift transmission
-
Filter type: Suction Filter,
Filter Insert - Supplementary Article/Info 2: with seal ring
- See accessories list for additionally required parts:
-
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- Manufacturer: VAICO
Transmission Type: 7-Speed Automatic Transmission, Dual-Clutch Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Length [mm]: 162
- Weight [kg]: 0.11
- Width [mm]: 71
- Height [mm]: 55
- Filter type: Screen Filter
- Manufacturer: DENCKERMANN FILTRY
- Filter type: Screen Filter
- Length [mm]: 503
- Width [mm]: 337
- Height [mm]: 46
-
Supplementary Article/Supplementary Info: with gasket/
seal, with oil drain plug - Weight [kg]: 1.4
-
Supplementary Article/Info 2: with filter,
with bolts/ screws - Observe service information:
- Manufacturer: BLUE PRINT
Transmission Type: 8-Speed Automatic Transmission, Automatic Transmission General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission -
Filter type: Screen Filter,
Filter Insert - Weight [kg]: 0.19
- Supplementary Article/Info 2: with oil sump gasket
- Manufacturer: BLUE PRINT FILTRY
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: 7-
Speed Dual- Clutch Transmission - Weight [kg]: 0.19
- Filter type: Pressure Filter Insert
- Manufacturer: DENCKERMANN FILTRY
-
Transmission Code: 0CJ,
0CK, 0CL, DL382 -
Supplementary Article/Supplementary Info: with gasket/
seal -
Recommended change interval [km]: 60,
000 - Recommended change interval [years]: 5
- See accessories list for additionally required parts:
- Manufacturer: VAICO
Transmission Type: Dual-Clutch Transmission, for 7-speed automatic transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks