• Switch pressure from [bar]: 0.55
• Switch pressure to [bar]: 0.85
• Colour Coding: brown
• Number of connectors: 1
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Colour Coding: grey
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge, 2 pins
• Additional information: Sender for water temperature gauge, 2 pins

• Lülituspunkt alates [bar]: 0,55
• Lülituspunkt kuni [bar]: 0,85
• Kaal (kg): 0,031
• vajaminev tükihulk: 1
• Väliskeere [mm]: M10 x 1
• Ühenduste arv: 1
• Võtmekaugus: 22
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värvimarkeering: pruun
• Üldine informatsioon: oil pressure switch
• Manufacturer: VIKA

• Connector Shape: D Shape
• Operating Mode: Hydraulic
• Colour Coding: brown
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Number of pins: 1
• Control Range [bar]: 0,55 - 0,85
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: DDWA
• Thread Size: M10x1
• Spanner Size: 24
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: OLISURVELšLITUS
• Manufacturer: MAX

• Seerianumber: ECC-AU-004
• Pistiku värv: pruun
• Pistikkontaktide arv: 1
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: NTY

• Supplementary Article/Info 2: without sensor, with plug, without cable
• Number of pins: 1
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kaal (kg): 0,015
• Ühenduste arv: 2
• Kruvipikkus kruvipea all [mm]: 20
• Värv: hall
• Värvimarkeering: hall
• Üldine informatsioon: temperature sensor; grey; 2 pins
• Manufacturer: VIKA

• Kaal (kg): 0,015
• Ühenduste arv: 2
• Kruvipikkus kruvipea all [mm]: 20
• Värv: must
• Värvimarkeering: hall
• Üldine informatsioon: temperature sensor; black
• Manufacturer: VIKA

• Connector Shape: oval, D Shape
• Colour Coding: grey
• Sensor Type: NTC Sensor
• Number of pins: 2
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thread Size: M10x1
• Spanner Size: 22
• Colour Coding: brown
• Number of pins: 1
• Pressure from [bar]: 0.55
• Pressure to [bar]: 0.85
• Name: OLISURVELšLITUS
• Manufacturer: MAX
• Lisainfo: 21-0359
• Additional information: 21-0359

• Pressure [bar]: 8.5
• Housing Colour: dark-brown
• Thread Size: M10×1-6g
• Diameter [mm]: 24
• Spanner Size: 24
• Number of pins: 1
• Name: OLISURVELšLITUS
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Supplementary Article/Info 2: without sensor, with plug, without cable
• Number of pins: 2
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: brown
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: OLISURVELšLITUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Switch Pressure [bar]: 0.7
• Thread Size: M10x1.0
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Weight [kg]: 0.041
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch point from [bar]: 0.55
• Switch point to [bar]: 0.85
• External Thread Size: M10 x 1
• Spanner Size: 22
• Number of connectors: 1
• Colour Coding: brown
• Weight [kg]: 0.031
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 91 9018
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Tightening torque from [Nm]: 20
• Voltage [V]: 12
• Combi Switch Function: Normally Open Contact
• Current Strength [A]: 0.15
• Tolerance [%]: 15
• Thread Size: M10x1
• Spanner Size: 24
• Pressure from [bar]: 0.555
• Pressure to [bar]: 0.85
• Number of pins: 1
• Corresponds to the original part in colour: brown
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

• Control Range [bar]: 0.55/0.85BAR
• Colour: brown
• General Information: oil pressure switch
• Manufacturer: BORSEHUNG

• Üldine informatsioon: temperature sensor
• Manufacturer: VIKA

• Number of pins: 2
• Sensor Type: NTC Sensor
• Fitted Diameter [mm]: 12
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: oval
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Connector Shape: oval
• Material: Plastic
• Number of pins: 2
• Plug Type: Female
• Sensor Type: NTC Sensor
• Spanner Size: 0
• Thread Size: 0

• General Information: temperature sensor
• Manufacturer: BORSEHUNG

• Pikkus (mm): 24
• vajaminev tükihulk: 1
• Anduritüüp: Hallsensor
• Pistikkontaktide arv: 3
• Seerianumber: ECP-AU-029
• Manufacturer: NTY

• Sensor Type: NTC Sensor
• Mounting Type: Screw Connection
• Connector Shape: oval
• Number of pins: 2
• Socket colour: black
• for OE number: 06K919523
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Number of connectors: 2
• Colour Coding: grey
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 2
• Number of pins: 3
• Fitting Depth [mm]: 24
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MAX

• Engine Code: DDWA
• Construction Year to: 10.2019
• Supplementary Article/Info 2: without pipe
• Number of pins: 3
• Name: Andur, v„ntvoll
• Manufacturer: MAX

• Quantity: 2
• Number of pins: 3
• Manufacturer: DELPHI
• Name: DE SS11473

• Diameter [mm]: 26
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Spring Design: Retaining Spring
• Length [mm]: 20
• Housing Colour: blue
• Height [mm]: 57
• Weight [kg]: 0.02
• Colour: grey
• Number of connectors: 2
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168731

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Number of pins: 3
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MEY

• Required quantity: 2
• Engine Code: DDWA
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PU009168401

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: with seal ring, without cable
• Connector Shape: oval
• for OE number: 04C 907 601K, 958 907 601 00
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Housing material: GRP (Glass fibre Reinforced Plastic)
• Connector Shape: oval
• Socket colour: black
• Overall Length [mm]: 58.5
• Supplementary Article/Info 2: without cable
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Üldine informatsioon: hall sender camshaft
• Manufacturer: VIKA

• Thread Size: 12 mm
• Manufacturer: VERNET

• Üldine informatsioon: impulse sender; crackshaft
• Manufacturer: VIKA

• Name: Andur, v„ntvoll
• Manufacturer: DLP

• Number of pins: 3
• Sensor Type: Hall Sensor
• Guarantee: 5 years guarantee
• General Information: Sold in Hueco brand: printing and packaging
• Manufacturer: HUCO

• Required quantity: 1
• Number of pins: 3
• Sensor Type: Inductive Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Required quantity: 2
• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Housing Colour: black
• Manufacturer: BREMI

• Takistus [oom]: 870
• valikuliselt:
• Pistikkontaktide arv: 3
• Installatsiooni sügavus (mm): 33
• Pistikukatte kuju: ovaalne
• Nominaalpinge (V): 12
• Manufacturer: ERA

• Fitting Position: Suction Pipe
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Connector Shape: oval
• Mounting Type: Clipped
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 10.2019
• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS

• Construction Year to: 10.2019
• Manufacturer: BOSCH

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Connector Shape: D Shape
• Supplementary Article/Info 2: without cable
• Manufacturer: VALEO

• Lambda andur: Bistabiilne andur
• Installatsiooni pool: ees
• Üldine informatsioon: lambda probe; front
• Manufacturer: VIKA

• Manufacturer Restriction: VAG
• Plug Type ID: Code A
• Cable Length [mm]: 175
• Number of pins: 3
• Cable Cross Section [mm²]: 0.75
• Contact surface: Silver-plated
• Cable insulation material: Silicone
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, heitgaasi rohuandur
• Manufacturer: HBE

• Required quantity: 2
• Sensor Type: Hall Sensor
• Mounting Type: Screw Connection
• Shape: oval
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring