• Kasutuspinge [V]: 12
• Lülitamispunkt alates [°C]: 84, 91
• Lülituspunkt kuni [°C]: 95, 102
• Võtmekaugus: 29
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Keermemõõt: M22 x 1,5
• Pistikkontaktide arv: 3
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 102-91/95-84 C
• Additional information: Thermo switch for fan 102-91/95-84 C

• Vehicle Identification Number (VIN) from: 8L-X-035001
• Pistikkontaktide arv: 4
• Värvimarkeering: roheline
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 4 pins
• Additional information: Sender for water temperature gauge 4 pins

• Lülitamispunkt alates [°C]: 90
• Lülituspunkt kuni [°C]: 95
• Lisainfo: Thermo switch for fan
• Additional information: Thermo switch for fan

• Kasutuspinge [V]: 12
• Lülitamispunkt alates [°C]: 84, 91
• Lülituspunkt kuni [°C]: 95, 102
• Võtmekaugus: 29
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: must
• Keermemõõt: M22 x 1,5
• Pistikkontaktide arv: 3
• Lisainfo: Thermo switch for fan 95-84/102-91 C
• Additional information: Thermo switch for fan 95-84/102-91 C

• Siseläbimõõt [mm]: 19,5
• Jämedus/Tugevus (mm): 3,5
• Materjal: Kumm
• OE-numbri jaoks: 7198663
• Manufacturer: DELLO AUTOMEGA

• Siseläbimõõt [mm]: 19,5
• Jämedus/Tugevus (mm): 3,5
• Kaal (kg): 0,001
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 2
• Lülituspunkt [°C]: 119
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for air condition 119 C
• Additional information: Thermo switch for air condition 119 C

• Vehicle Identification Number (VIN) from: 8L-X-035 001
• Pistikkontaktide arv: 4
• Värv: roheline
• Manufacturer: DELLO AUTOMEGA

• Värv: must
• Sisselülitamispunkt [°C]: 95
• Väljalülimispunkt (°C): 85
• Keermemõõt: M22X1,5
• Pistikkontaktide arv: 3
• Pistikukatte kuju: kolmnurkne
• Manufacturer: DELLO AUTOMEGA

• Engine Code: BAM
• Ühenduste arv: 4
• Manufacturer: 3RG

• Pistikukatte kuju: D-kuju
• Materjal: Plastik
• Pistikkontaktide arv: 4
• Pistikute teostus: Female
• Anduritüüp: NTC-andur
• Manufacturer: NISSENS
• Name: NI 207009

Tehniline informatsioon: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Pistikkontaktide arv: 3
• Sisselülitamispunkt [°C]: 95
• Väljalülimispunkt (°C): 85
• Manufacturer: DELLO AUTOMEGA

• Korpusevärv: must
• Pistikkontaktide arv: 4
• Võtmekaugus: 0
• Manufacturer: DELPHI
• Name: DE TS10236-12B1

• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Kokkupuutepind: tinutatud
• Asetuslaius (mm): 1,5
• Pistikkontaktide arv: 4
• Ridade arv: 2
• Manufacturer: DEPO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: D-kuju
• Pistikkontaktide arv: 4
• OE-numbri jaoks: 059919501A
• Piirangutega toode/piirangu info 2: koos osadega
• Manufacturer: NRF

• Anduritüüp: NTC-andur
• Montaaživiis: klemmitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 4
• Pistiku värv: must
• OE-numbri jaoks: 059919501
• Piirangutega toode/piirangu info 2: koos osadega
• Manufacturer: NRF

• Avamistemperatuur (°C): 120
• Pistikkontaktide arv: 2
• Värv: valge
• Võtmekaugus: 20 mm
• Kaal (kg): 0,02
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Pistikkontaktide arv: 3
• Pistikute teostus: Female
• Manufacturer: ABAKUS

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Ühenduste arv: 4
• Kaal (kg): 0,038
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Manufacturer: FEBI
• Additional information: FE32510
• Lisainfo: FE32510

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BAM
• Housing Colour: green
• Vastab originaalosa värvile: must
• Name: EP 1.830.258
• Manufacturer: EPS

• Engine Code: BAM
• Housing Colour: green
• Vastab originaalosa värvile: must
• Manufacturer: FACET

• Quantity: 1
• Üldine informatsioon: temperature switch
• Manufacturer: BORSEHUNG

• Pinge [V]: 12
• Pistikkontaktide arv: 4
• Garantii: 3 aastat garantii
• Kaal (kg): 0,02
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 17SKV345
• Manufacturer: ESEN SKV

• for model code: 2 Pin
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Manufacturer: DELPHI

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with air conditioning
• Lülituspunkt [°C]: 119
• Pistikkontaktide arv: 2
• Manufacturer: FAE

• Kaal (kg): 0,017, 0,027
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 059 919 501 A
• Värvimarkeering: roheline
• Vedrukuju: Kinnitusvedru
• Pistikkontaktide arv: 4
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt kuni [°C]: 90
• Manufacturer: FAE

• Montaaživiis: pistetud
• Pinge [V]: 12
• Piirangutega toode/piirangu info: koos tihendiga
• Värv: roheline
• Anduritüüp: NTC-andur
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos turvarõngaga
• Vastab originaalosa värvile: roheline, must
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PT009107141
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Name: SW 30 92 9318
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: BAM
• temperatuurivahemik alates [°C]: 95
• Temperatuurivahemik kuni [°C]: 90
• Keermemõõt: M22x1,5
• Võtmekaugus: 29
• Name: EP 1.850.262
• Manufacturer: EPS

• Keermemõõt: M22 x 1,5
• Võtmekaugus: 29
• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 102, 95
• Lülituspunkt kuni [°C]: 90, 97
• Manufacturer: ERA

• Välisläbimõõt [mm]: 20
• Kaal (kg): 0,02
• Ühenduste arv: 4
• Värv: must
• vajaminev tükihulk: 1
• Üldine informatsioon: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Quantity: 1
• Välisläbimõõt [mm]: 20
• Kaal (kg): 0,02
• Ühenduste arv: 4
• Värv: roheline
• vajaminev tükihulk: 1
• Üldine informatsioon: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Pistikkontaktide arv: 3
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: BAM
• Keermemõõt: M22*1.5
• Võtmekaugus: S29
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ristkülik
• Manufacturer: DELPHI
• Name: DE TS10292

• Montaaživiis: kruvitud
• Lülitamispunkt alates [°C]: 90
• Lülituspunkt kuni [°C]: 95
• Pinge [V]: 12
• Pistikkontaktide arv: 2
• Pöördeliik: koos meetrilise keermega
• Keermemõõt: M 22 x 1,5
• Lüliti funktsioon: Lukustaja
• Võtmekaugus: 29
• Pistikute teostus: Lamepistik
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA

• for model code: 3 Pin
• Alternatively:
• Keermemõõt: M22*1.5
• Võtmekaugus: S29
• Pistikkontaktide arv: 3
• Pistikukatte kuju: ristkülik
• Manufacturer: DELPHI
• Name: DE TS10285

• Pistikkontaktide arv: 3
• Pikkus (mm): 29
• Kõrgus (mm): 54,6
• Kaal (kg): 0,077
• Keermemõõt: M22x1,5
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 87
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 2
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt kuni [°C]: 90
• Pistiku värv: pruun
• Manufacturer: FAE

• Pikkus (mm): 29
• Kõrgus (mm): 45
• Kaal (kg): 0,073
• Keermemõõt: M22x1,5
• Lülituspunkt [°C]: 102, 85
• Värv: must
• Lüliti: koos topelt termolülitiga
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 102
• Lülituspunkt kuni [°C]: 85
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BAM
• Keermemõõt: M22x1,5
• Võtmekaugus: 29
• Vastab originaalosa värvile: sinine, must
• Name: EP 1.850.652
• Manufacturer: EPS

• Läbimõõt [mm]: 25
• Pikkus (mm): 50
• Kaal (kg): 0,02, 0,2
• Piirangutega toode/piirangu info: koos tihendiga
• OE-numbri jaoks: 059 919 501
• Vedrukuju: Kinnitusvedru
• Pistikkontaktide arv: 4
• Pistikukatte kuju: nurgeline
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BAM
• Vehicle Equipment: for vehicles with air conditioning
• Hoiatustemperatuur (°C): 120
• Name: EP 1.840.074
• Manufacturer: EPS

• Montaaživiis: kruvitud
• Lülitamispunkt alates [°C]: 87
• Lülituspunkt kuni [°C]: 102
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Keermemõõt: M 22 x 1,5
• Lüliti: koos topelt termolülitiga
• Lüliti funktsioon: Topeltväljund, Lukustaja
• Võtmekaugus: 29
• Pistikute teostus: Lamepistik
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6ZT007800111
• Manufacturer: HELLA

• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt kuni [°C]: 90
• Manufacturer: FAE

• Pistikkontaktide arv: 3
• Lülitamispunkt alates [°C]: 95
• Lülituspunkt kuni [°C]: 84
• Manufacturer: FAE

• Väliskeerme mõõde: M22 x 1,5
• Ühenduste arv: 3
• temperatuurivahemik alates [°C]: 87, 97
• Temperatuurivahemik kuni [°C]: 97, 102
• Pistikukatte kuju: kolmnurkne
• Kaal (kg): 0,06
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Montaaživiis: kruvitud
• Lülitamispunkt alates [°C]: 90
• Lülituspunkt kuni [°C]: 102
• Pinge [V]: 12
• Pistikkontaktide arv: 3
• Värvimarkeering: must
• Keermemõõt: M 22 x 1,5
• Lüliti: koos topelt termolülitiga
• Lüliti funktsioon: Topeltväljund, Lukustaja
• Võtmekaugus: 29
• Pistikute teostus: Lamepistik
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6ZT007837061
• Manufacturer: HELLA

• Engine Code: BAM
• Keermemõõt: M22x1,5
• Võtmekaugus: 29
• Name: EP 1.850.690
• Manufacturer: EPS

• Ühenduste arv: 4
• Installatsiooni sügavus (mm): 20
• Manufacturer: BERU BY DRIV