Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: JP GROUP
-
Lisainfo: PAKENDIS 10 tk,
kuvatakse 1tk hind -
Additional information: PAKENDIS 10 tk,
kuvatakse 1tk hind
- Suspension: for vehicles without bad road version
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Material: Thermoplast
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Suspension: for vehicles with bad road version
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Manufacturer: JP-
GROUP - Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Fitting Position: Front Axle
- Lisainfo: Tower rubber stop
- Additional information: Tower rubber stop
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Fitting Position: Rear Axle
- Manufacturer: JP GROUP
-
Lisainfo: Tower rubber stop,
rear -
Additional information: Tower rubber stop,
rear
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Height [mm]: 94
- Manufacturer: JP GROUP
- Lisainfo: Tower rubber stop
- Additional information: Tower rubber stop
- Fitting Position: Front Axle
- Material: Thermoplast
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Front Axle
- Height [mm]: 80
- Required quantity: 2
- Manufacturer: MAX
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A4/A6/PASS
- Suspension: for vehicles without bad road version
- Fitting Position: Rear Axle
- Material: Thermoplast
- Manufacturer: MAX
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. A80/PASSA
- Fitting Position: Front Axle
- Suspension: for vehicles without sports suspension
- Manufacturer: DELLO AUTOMEGA
- Suspension: for vehicles without bad road version
- Fitting Position: Rear Axle
- Material: Thermoplast
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles without electronic suspension control
-
for PR number: 1BE,
1BP, 1BT - Block Separation:
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Thickness [mm]: 77
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MAX
- Fitting Position: Front Axle
- Construction Year to: 03.2000
- Block Separation:
- Construction Year from: 05.2000
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 810003410
Suspension: for vehicles with standard suspension, for vehicles with bad road version
- for OE number: 4D0412137B
- Fitting Position: Front Axle
- Height [mm]: 80
- Material: Plastic
- Weight [g]: 38
- Inner Diameter 1 [mm]: 39
- Inner Diameter 2 [mm]: 63
- Name: IM 37423
- Manufacturer: ORIGINAL IMPERIUM
-
Vehicle Identification Number (VIN) to: 4B-
5- 050 000, 4B- Y- 200 000 - Fitting Position: Rear Axle
- Manufacturer: DELLO AUTOMEGA
- Thickness [mm]: 134
-
Material: PU
(Polyurethane) -
Fitting Position: Rear Axle,
Front Axle Right, Front Axle Left -
Name: PUHVER,
VEDRUSTUS - Manufacturer: MAX
Suspension: for vehicles with heavy duty suspension, for vehicles without electronic suspension control
- Fitting Position: Front Axle
- Height [mm]: 85
- for OE number: 8D0412131F
- Manufacturer: SASIC
- Fitting Position: Front Axle
- Height [mm]: 80
- Required quantity: 2
- replacement in pairs recommended:
- Manufacturer: MEY
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A4/A6/PASS
- Length [mm]: 136
-
Material: PU
(Polyurethane) -
Fitting Position: Rear Axle,
Front Axle Right, Front Axle Left - Outer Diameter 1 [mm]: 18
- Outer Diameter 2 [mm]: 15
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MAX
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control
- Suspension: for vehicles without electronic suspension control
- Thickness [mm]: 160
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Name: SW 30 93 6604
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) from: 4B-
W- 100001 - Block Separation:
-
Fitting Position: Front Axle Right,
Front Axle Left - Height [mm]: 77
- Replace in pairs only:
- Manufacturer: TOPRAN
Suspension: for vehicles with bad road version, for vehicles with sports suspension General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles with standard suspension
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 136
- Replace in pairs only:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: HAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Suspension: for vehicles without sports suspension
-
Fitting Position: Front Axle Left,
Front Axle Right - Height [mm]: 85
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Construction Year to: 12.2000
-
Vehicle Identification Number (VIN) to: 4B-
Y- 200 000 - Suspension: for vehicles with bad road version
- Fitting Position: Rear Axle
- Manufacturer: JP GROUP
-
Lisainfo: Tower rubber stop,
rear -
Additional information: Tower rubber stop,
rear
- Suspension: for vehicles with bad road version
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 134
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Material: PU
(Polyurethane) -
Fitting Position: Rear Axle Left,
Rear Axle Right - Thickness [mm]: 134
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MAX
Suspension: for vehicles with heavy duty suspension, for vehicles without electronic suspension control
- Suspension: for vehicles with bad road version
- Fitting Position: Rear Axle
- Material: Thermoplast
- Height [mm]: 157
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Lisainfo: Tower rubber stop,
rear -
Additional information: Tower rubber stop,
rear
- Thickness [mm]: 80
- Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.04
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A4/A6/PASS
- Suspension: for vehicles without electronic suspension control
- Thickness [mm]: 160
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Name:
- Manufacturer: FEB
- Additional information: FE36604
- Lisainfo: FE36604
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
for PR number: 1BA,
1BG, 1BH -
Fitting Position: Front Axle Right,
Front Axle Left - Height [mm]: 94
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Thickness [mm]: 80
- Material: Thermoplast
- Fitting Position: Front Axle
- Weight [kg]: 0.04
- Manufacturer: SWAG
- Name: SW 30 93 6728
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Height [mm]: 85
- Manufacturer: OPTIMAL ZAWIESZENIE
- Suspension: for vehicles without electronic suspension control
- Fitting Position: Rear Axle both sides
- Thickness [mm]: 160
- Weight [kg]: 0.037
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- for OE number: 8D0412131D
- Fitting Position: Front Axle
-
Material: PU
(Polyurethane) - Weight [g]: 85
- Name: IM 37435
- Manufacturer: ORIGINAL IMPERIUM
- Suspension: for vehicles with sports suspension
- for PR number: 1BE
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Height [mm]: 113
- Replace in pairs only:
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Length [mm]: 135
- Weight [kg]: 0.105
- Required quantity: 2
- Weight [g]: 105
- Outer Diameter 1 [mm]: 18
- Outer Diameter 2 [mm]: 15
- Manufacturer: METALCAUCHO
-
for PR number: 1BG,
1BA - Block Separation:
- for combined PR number: 1BR+1BV
- Width [mm]: 58
- Thickness [mm]: 85
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.1
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles without electronic suspension control
-
for PR number: 1BE,
1BP, 1BT - Block Separation:
- Thickness [mm]: 77
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.08
-
Name: Puhver,
vedrustus - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 04.2000
-
Vehicle Identification Number (VIN) to: 4B-
Y- 200 000 - Block Separation:
- Construction Year from: 05.2000
-
Vehicle Identification Number (VIN) from: 4B-
Y- 200 001 -
Fitting Position: Front Axle Left,
Front Axle Right, Upper -
Name: PUHVER,
VEDRUSTUS - Manufacturer: LMI
Suspension: for vehicles with standard suspension, for vehicles with bad road version SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- Length [mm]: 135
- Weight [kg]: 0.09
- Required quantity: 2
- Outer Diameter 1 [mm]: 18
- Outer Diameter 2 [mm]: 15
- General Information: helper spring; rear
- Manufacturer: VIKA
- for OE number: 893512137
- Fitting Position: Rear Axle
- Height [mm]: 134
- Material: Thermoplast
- Weight [g]: 51
- Diameter 1 [mm]: 36
- Diameter 2 [mm]: 57
- Name: IM 37422
- Manufacturer: ORIGINAL IMPERIUM
Fabrication Number: ZWT-VW-030SK
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3 tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Rear Axle
- Thickness [mm]: 134
- Weight [kg]: 0.09
- Required quantity: 2
- General Information: helper spring; rear
- Manufacturer: VIKA
- Fitting Position: Front Axle
- Height [mm]: 77
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
Suspension: for vehicles with bad road version, for vehicles with sports suspension
- for OE number: 3B0512131H
- Fitting Position: Rear Axle
- Required quantity: 2
-
Material: PU
(Polyurethane) - Weight [g]: 146
- Thickness [mm]: 134
- Name: IM 37437
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Height [mm]: 85
- Quantity Unit: Piece
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
Suspension: for vehicles without bad road version, for vehicles without sports suspension
-
Specification: Type:
universal - Diameter [mm]: 16
- Fitting Position: Front Axle
- Manufacturer: JAPKO
- Suspension: for vehicles with electronic suspension control
- Thickness [mm]: 157
-
Material: PE
(Polyethylene) - Fitting Position: Rear Axle
- Weight [kg]: 0.05
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Weight [kg]: 0.09
- Manufacturer: VAICO
Suspension: for vehicles with heavy duty suspension, for vehicles without electronic suspension control, for vehicles with bad road version General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Rear Axle
- Height [mm]: 134
- Suspension: for vehicles with bad road version
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Model Year from: 1998
- Model Year to: 2001
-
Supplementary Article/Info 2: with protect screen,
with nut - Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- SVHC: No SVHC present!
- Name: LU 810007710
- Manufacturer: FAG
- Length [mm]: 135
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Outer Diameter 1 [mm]: 18
- Outer Diameter 2 [mm]: 15
- Weight [kg]: 0.09
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Rear Axle
- Height [mm]: 134
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
Suspension: for vehicles without bad road version, for vehicles without sports suspension
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.1
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
- Additional information: FE18376
- Lisainfo: FE18376
Suspension: for vehicles with sports suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 135
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Outer Diameter 1 [mm]: 18
- Outer Diameter 2 [mm]: 15
- Weight [kg]: 0.09
- Name: SW 30 91 8374
- Manufacturer: SWAG
Suspension: for vehicles with standard suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 01.1998
- Fitting Position: Rear Axle
- Height [mm]: 103.5
- Suspension: for vehicles with sports suspension
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Model Year from: 1998
- Model Year to: 2001
- Supplementary Article/Info 2: with protect screen
- Name: Rattakalde korrektuurkruvi
- Manufacturer: MAX
- Block Separation:
- Construction Year to: 10.2000
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
- for OE number: 4D0412137C
- Manufacturer: KAMOKA AMORTYZATORY
Suspension: for vehicles with standard suspension, for vehicles with sports suspension
- Construction Year to: 12.2004
- Fitting Position: Rear Axle
- Manufacturer: ASHIKA
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- Supplementary Article/Info 2: with protect screen
- Thread Size: M12x1.5
- Screw length below head [mm]: 95
- Construction Year to: 12.2004
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
Suspension: for vehicles without sports suspension, for vehicles without bad road version
-
for PR number: 1BG,
1BA, 1BH - Block Separation:
- Thickness [mm]: 94
- Inner Diameter [mm]: 20.3
-
Material: PU
(Polyurethane) - Fitting Position: Front Axle
- Weight [kg]: 0.09
- Manufacturer: FEBI
Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year to: 12.2004
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Manufacturer: JP GROUP
- Thickness [mm]: 134
-
Material: PU
(Polyurethane) - Fitting Position: Rear Axle
- Weight [kg]: 0.09
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: FEB
Suspension: for vehicles with heavy duty suspension, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
-
Lisainfo: 72-
2422 -
Additional information: 72-
2422
- Fitting Position: Front Axle
- Height [mm]: 94
- Required quantity: 2
- replacement in pairs recommended:
-
Name: PUHVER,
VEDRUSTUS - Manufacturer: MEY
- Model Year from: 1998
- Model Year to: 2001
- Weight [kg]: 0.163
- Packaging length [cm]: 10.5
- Packaging width [cm]: 3.4
- Packaging height [cm]: 3.4
- Manufacturer: FEBEST
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Manufacturer: JP GROUP
- Construction Year to: 10.2000
- Spring Type: for vehicles without air suspension
- Vehicle Equipment: for vehicles without leveling control
- Fitting Position: Rear Axle
- for OE number: 3B0512131H
- Manufacturer: KAMOKA AMORTYZATORY
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
-
Lisainfo: 72-
1220 -
Additional information: 72-
1220
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MAX
-
Lisainfo: 72-
1219 -
Additional information: 72-
1219
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
- Manufacturer: JP GROUP
-
for PR number: 1BG,
1BA - Block Separation:
- Fitting Position: Front Axle
-
Lisainfo: Dust Cover Kit,
shock absorber -
Additional information: Dust Cover Kit,
shock absorber
Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control
- Fitting Position: Rear
- General Information: rear strut bump stop
- Manufacturer: BORSEHUNG
- Construction Year to: 10.2000
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
- Name: CFD PK4711
- Manufacturer: DACO
Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with heavy duty suspension
-
Fitting Position: Front Axle,
Front Axle both sides - Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
A4/A6/A8/PASSAT
(kvaliteediklass: PJ)"
- Model Year from: 1998
- Model Year to: 2001
- Weight [kg]: 0.18
- Packaging length [cm]: 12.8
- Packaging width [cm]: 3.8
- Packaging height [cm]: 3.8
- Manufacturer: FEBEST
- Construction Year to: 12.2004
- Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
Suspension: for vehicles without sports suspension, for vehicles without bad road version
- for OE number: 3B0512131H
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane) - Weight [g]: 289
- Component Number: 2
- Name: IM 51273
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Front Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0064
- Construction Year to: 12.2004
- Vehicle Identification Number (VIN) from: 4B#1#000001
- Spring Type: for vehicles without air suspension
- Suspension: for vehicles with bad road version
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
- Construction Year to: 12.2004
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: JPA
- Construction Year to: 10.2000
- Spring Type: for vehicles without air suspension
- Vehicle Equipment: for vehicles without leveling control
- Fitting Position: Rear Axle
- Name: CFD PK4770
- Manufacturer: DACO
- Construction Year to: 12.2004
- Vehicle Identification Number (VIN) from: 4B#1#000001
- Suspension: for vehicles with bad road version
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Rear Axle
- Height [mm]: 135
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: MAX
- Fitting Position: Front Axle
- for OE number: 8D0412131F
- Manufacturer: KAMOKA AMORTYZATORY
- Fitting Position: Front Axle
-
Material: Plastic,
PU (Polyurethane) - Weight [g]: 202
- Component Number: 4
- Name: IM 50135
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
-
Fitting Position: Rear Axle,
Rear Axle both sides - Suspension: for vehicles with standard suspension
- Name: Shock absorber protection kit left+right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI/VW
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI/VW
(kvaliteediklass: PJ)"
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0079
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: AUT
-
Specification: Type:
universal - Diameter [mm]: 16
- Fitting Position: Front Axle
- Manufacturer: JPA
Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid NISSAN P.
- Fitting Position: Rear Axle
- Manufacturer: MAGNETI MARELLI
- Name: MM APK0068
- Fitting Position: Front Axle
- for OE number: 8D0412131F
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: AUT
- Additional information: D5096
- Lisainfo: D5096
- Construction Year to: 12.2004
- Vehicle Identification Number (VIN) from: 4B#1#000001
- Suspension: for vehicles with bad road version
- Spring Type: for vehicles without air suspension
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
- Additional information: 915708 KYB
- Lisainfo: 915708 KYB
-
Fitting Position: Rear Axle,
Rear Axle both sides - Suspension: for vehicles with sports suspension
- Quality class: PJ
- Name: Shock absorber protection kit left+right
-
Fitting Position: Front Axle,
Lower - Material: Rubber
-
Manufacturer: AUTO-
GH
- Construction Year to: 10.2000
- Fitting Position: Rear Axle
- Vehicle Equipment: for vehicles without leveling control
- Spring Type: for vehicles without air suspension
- Manufacturer: DENCKERMANN AMORTYZATORY
- Fitting Position: Rear Axle
-
Material: PU
(Polyurethane), Thermoplast - Weight [g]: 266
- Component Number: 4
- Name: IM 50145
- Manufacturer: ORIGINAL IMPERIUM
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: AUT
- Fitting Position: Rear Axle
- General Information: repair kit for shock absorber; rear
- Manufacturer: VIKA
- Model Year from: 1998
- Model Year to: 2001
- Fitting Position: Rear Axle
- Weight [kg]: 0.335
- Packaging length [cm]: 15.9
- Packaging width [cm]: 12.5
- Packaging height [cm]: 6
- Manufacturer: FEBEST
- Construction Year to: 12.2004
- Fitting Position: Rear Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: KYB
- Additional information: 910003 KYB
- Lisainfo: 910003 KYB
Suspension: for vehicles without sports suspension, for vehicles without bad road version
-
for PR number: 1BG,
1BA - Block Separation:
- for combined PR number: 1BR+1BV
-
Material: PU
(Polyurethane), Rubber - Fitting Position: Front Axle
- Weight [kg]: 0.55
-
Name: Puhver,
vedrustus - Manufacturer: FEB
Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Construction Year to: 10.2000
- Fitting Position: Rear Axle
- Spring Type: for vehicles without air suspension
- Vehicle Equipment: for vehicles without leveling control
- Weight [kg]: 0.4
- Warranty: 5 years warranty
- Packaging length [cm]: 22
- Packaging width [cm]: 11
- Packaging height [cm]: 18
- Manufacturer: MONROE
- Lisainfo: PK101 MON
- Additional information: PK101 MON
- Construction Year to: 12.2004
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Manufacturer: KYB
- Fitting Position: Front Axle
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with sports suspension
- Fitting Position: Rear Axle
- Quantity Unit: Set
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: MEY
- Fitting Position: Rear Axle
- Suspension: for vehicles with sports suspension
-
Name: TOLMUKAITSE KOMPLEKT,
AMORDID - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Quantity per axle: 1
- Manufacturer: SKF
Suspension: for vehicles with sports suspension, for vehicles with heavy duty suspension
- Model Year from: 1998
- Model Year to: 2001
- Fitting Position: Front Axle
- Weight [kg]: 0.253
- Suspension: for vehicles with standard suspension
- Packaging length [cm]: 13.4
- Packaging width [cm]: 10.1
- Packaging height [cm]: 6.7
- Manufacturer: FEBEST
-
Vehicle Identification Number (VIN) from: 4B-
1- 000 001 -
Vehicle Identification Number (VIN) to: 4B-
Y- 200 000 - Suspension: for vehicles with standard suspension
- Fitting Position: Rear Axle
- Manufacturer: BILSTEIN
-
Name: BI 11-
149835
Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"
- Suspension: for vehicles with standard suspension
- Fitting Position: Front Axle
-
Name: Tolmukaitse komplekt,
Amordid - Manufacturer: BIL
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks