Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Section: Lower Section
- Manufacturer: JP GROUP
-
Lisainfo: Spring disc and base,
front axle, lower -
Additional information: Spring disc and base,
front axle, lower
- Fitting Position: Front Axle
- for OE number: 8D0 412 066 F
- Manufacturer: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper - Material: Sheet Steel
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle,
Upper -
Name: Laager -
Kndmik. VW P. A4/ A6/ A8/ PASSAT 96- - Manufacturer: MAX
-
Installatsiooni pool: üleval,
esisild mõlemapoolselt - Name: Coil spring underlayer left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A4/A6/VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A4/A6/VW PASSAT
(kvaliteediklass: PJ)"
- Quantity: 2
- Installatsiooni pool: Esisild
- Üldine informatsioon: spring disc; lower
- Manufacturer: VIKA
- Special Purpose Vehicle: for armoured vehicles
- Construction Year to: 12.2001
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Installatsiooni pool: Esisild,
esisild paremal, esisild vasakul -
Manufacturer: AUTO-
GH
- Quantity: 2
- Installatsiooni pool: Esisild
-
Kaal (kg): 0,
315 - vajaminev tükihulk: 2
- Üldine informatsioon: front spring disc; upper
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
Upper - Weight [kg]: 0.315
- Name:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Weight [g]: 331
- Name: Vedrutaldrik
- Manufacturer: IMP
- Special Purpose Vehicle: for armoured vehicles
- Construction Year to: 12.2001
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- replacement in pairs recommended:
- Name: VEDRUKINNITUS
- Manufacturer: MEY
- Construction Year to: 05.2004
- Fitting Position: Rear Axle
- Pikkus (mm): 298
- Välisläbimõõt [mm]: 125
- Name: CFD 814204
- Manufacturer: DACO
- Installatsiooni pool: Tagasild
- Pikkus (mm): 305
- Välisläbimõõt [mm]: 124
-
Jämedus/Tugevus (mm): 13,
5 - Manufacturer: JAPKO
- Lisainfo: ZCJ6520G JAPKO
- Additional information: ZCJ6520G JAPKO
- Fitting Position: Rear Axle
- Length [mm]: 305
- Outer Diameter [mm]: 124
- Thickness [mm]: 13.5
-
Manufacturer: ASHIKA-
SPREZYNY - Quantity per packing unit: 2
- Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Outer Diameter [mm]: 124
- Length [mm]: 305
- Wire Diameter [mm]: 13.5
- Name: vedru
- Manufacturer: MAX
-
Vehicle Identification Number (VIN) from: 4B-
W- 100001 -
Installatsiooni pool: esisild vasakul,
esisild paremal, all - vajaminev tükihulk: 2
- Manufacturer: METZGER
- Installatsiooni pool: Esisild
- Jämedus/Tugevus (mm): 348
-
Kaal (kg): 2,
97 - vajaminev tükihulk: 2
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 134
- Välisläbimõõt 1 [mm]: 96
- Üldine informatsioon: coil spring; front
- Manufacturer: VIKA
- Construction Year from: 01.2001
- Suspension: for vehicles with standard suspension
- reinforced version:
- Fitting Position: Front Axle
- Name: vedru
- Manufacturer: MAX
- Installatsiooni pool: Esisild
- Pikkus (mm): 345
- Välisläbimõõt [mm]: 136
-
Jämedus/Tugevus (mm): 14,
75 - Manufacturer: JAPKO
- Installatsiooni pool: Tagasild
- Manufacturer: DENCKERMANN FILTRY
- Construction Year from: 01.2001
- Suspension: for vehicles with standard suspension
- reinforced version:
- Quantity per packing unit: 2
- Fitting Position: Front Axle
- Name: vedru
- Manufacturer: MAX
- Fitting Position: Front Axle
- Length [mm]: 345
- Outer Diameter [mm]: 136
- Thickness [mm]: 14.75
-
Manufacturer: ASHIKA-
SPREZYNY - Quantity per packing unit: 2
- Fitting Position: Rear Axle
- Parameter: AC
- Spring Design: Coil Spring
- Weight [kg]: 2.312
- Thickness 1 [mm]: 13.5
- Outer Diameter [mm]: 124
- Length [mm]: 305
- Manufacturer: KYB
Name: Vedru - Vedrustus/amordid VW T. A6 97-05 QUATTRO/PASSAT 97- SYNCRO/4MOTION
- Fitting Position: Front Axle
- Parameter: E
- Spring Design: Coil Spring
- Weight [kg]: 3
- Thickness 1 [mm]: 14.8
- Outer Diameter [mm]: 136
- Length [mm]: 345
- Manufacturer: KYB
Name: Vedru - Vedrustus/amordid AUDI P. A6 2.5TDI 07.97-01.05
- Suspension: for vehicles with standard suspension
- Length [mm]: 346
-
Outer Diameter [mm]: 135,
95.5 - Fitting Position: Front Axle
- Weight [kg]: 2.76
- Wire Diameter [mm]: 14
- Replace in pairs only:
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Vedru - Vedrustus/amordid VW P. SUPERB/PASSAT/A6 LE/PR
- Fitting Position: Front Axle
- Replace in pairs only:
- Required quantity: 2
- Material: Spring Steel
- replacement in pairs recommended:
-
Name: Vedru -
Vedrustus/ amordid VW P. PASSAT - 05 - Manufacturer: MEY
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Construction Year to: 05.2004
- Fitting Position: Front Axle
- Length [mm]: 350
- Weight [kg]: 2.9
- Outer Diameter [mm]: 134
- Inner Diameter 1 [mm]: 67
- Inner Diameter 2 [mm]: 67
- Guarantee: 5 years guarantee
- Number of coils: 6.5
- Packaging length [cm]: 40.6
- Packaging width [cm]: 16.7
- Packaging height [cm]: 16.8
- Wire Diameter [mm]: 14.1
- Manufacturer: MONROE
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Installatsiooni pool: Esisild
- Vedrukuju: Kruvivedru
- Manufacturer: KILEN
- Construction Year to: 05.2004
- Fitting Position: Front Axle
- reinforced version:
- Length [mm]: 345
- Weight [kg]: 3.7
- Outer Diameter [mm]: 134
- Inner Diameter 1 [mm]: 68
- Inner Diameter 2 [mm]: 65
- Guarantee: 5 years guarantee
- Number of coils: 7.3
- Packaging length [cm]: 41.5
- Packaging width [cm]: 15.1
- Packaging height [cm]: 15.2
- Wire Diameter [mm]: 15
- Manufacturer: MONROE
- Construction Year to: 05.2004
- Fitting Position: Rear Axle
- Length [mm]: 298
- Weight [kg]: 2.6
- Outer Diameter [mm]: 125
- Guarantee: 5 years guarantee
- Packaging length [cm]: 41.5
- Packaging width [cm]: 15.4
- Packaging height [cm]: 15
- Wire Diameter [mm]: 14
- Manufacturer: MONROE
- Installatsiooni pool: Tagasild
- Vedrukuju: Kruvivedru
- Manufacturer: KILEN
- Construction Year from: 01.2001
- Suspension: for vehicles with standard suspension
- reinforced version:
- Fitting Position: Front Axle
-
Name: BI 36-
266432 - Manufacturer: BILSTEIN
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Transmission Type: Automatic Transmission
- Parameter: E
- Length [mm]: 348
- Outer Diameter [mm]: 135
- Diameter [mm]: 14.9
-
Name: Vedru -
Vedrustus/ amordid AUDI P. A6 02/ 2000- - Manufacturer: SAA
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Rear Axle
- reinforced version:
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Madaldus (mm): 40
- Sõidukivarustus: sõidukitele ilma nivooreguleerijata
-
Loatüüp: ilma TÜV®-
ekspertiisita
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks