• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk, kuvatakse 1tk hind
• Additional information: PAKENDIS 10 tk, kuvatakse 1tk hind

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Thermoplast
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Front Axle Left, Front Axle Right
• Suspension: for vehicles with standard suspension
• Manufacturer: JP GROUP
• Lisainfo: Tower rubber stop
• Additional information: Tower rubber stop

• Fitting Position: Front Axle
• Height [mm]: 94
• Manufacturer: JP GROUP
• Lisainfo: Tower rubber stop
• Additional information: Tower rubber stop

• Fitting Position: Front Axle
• Material: Thermoplast
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 2
• Installatsiooni pool: Esisild
• Kaal (kg): 0,04
• Jämedus/Tugevus (mm): 80
• vajaminev tükihulk: 2
• Üldine informatsioon: protective pipe; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Height [mm]: 80
• Required quantity: 2
• Manufacturer: MAX

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A4/A6/PASS

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Material: Thermoplast
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Material: Thermoplast
• Manufacturer: MAX

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW T. A80/PASSA

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Manufacturer: DELLO AUTOMEGA

• Installatsiooni pool: esisild mõlemapoolselt
• Stopperi kõrgus [mm]: 85
• Manufacturer: OYODO

• Quantity: 2
• Installatsiooni pool: Esisild
• Kaal (kg): 0,1
• Jämedus/Tugevus (mm): 85
• vajaminev tükihulk: 2
• Üldine informatsioon: helper spring; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• SVHC: No SVHC present!
• Name: LU 810003410
• Manufacturer: FAG

• for OE number: 4D0412137B
• Fitting Position: Front Axle
• Height [mm]: 80
• Material: Plastic
• Weight [g]: 38
• Inner Diameter 1 [mm]: 39
• Inner Diameter 2 [mm]: 63
• Name: IM 37423
• Manufacturer: ORIGINAL IMPERIUM

• Suspension: for vehicles with bad road version
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Tower rubber stop, rear
• Additional information: Tower rubber stop, rear

• Suspension: for vehicles without electronic suspension control
• for PR number: 1BE, 1BP, 1BT
• Block Separation:
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Thickness [mm]: 77
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 4B-W-100001
• Block Separation:
• Quantity per packing unit: 2
• Fitting Position: Front Axle Right, Front Axle Left
• Height [mm]: 77
• Replace in pairs only:
• Manufacturer: TOPRAN

Suspension: for vehicles with bad road version, for vehicles with sports suspension General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 136
• Replace in pairs only:
• Name: PUHVER, VEDRUSTUS
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Height [mm]: 85
• for OE number: 8D0412131F
• Manufacturer: SASIC

• Suspension: for vehicles with bad road version
• Fitting Position: Rear Axle Left, Rear Axle Right
• Height [mm]: 134
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Suspension: for vehicles without sports suspension
• Quantity per packing unit: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Height [mm]: 85
• Replace in pairs only:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Thickness [mm]: 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.04
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A4/A6/PASS

• Fitting Position: Front Axle
• Height [mm]: 80
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid VW P. A4/A6/PASS

• for PR number: 1BA, 1BG, 1BH
• Quantity per packing unit: 2
• Fitting Position: Front Axle Right, Front Axle Left
• Height [mm]: 94
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for PR number: 1BA, 1BB, 1BH, 1BP, 1BT
• Block Separation:
• Fitting Position: Rear Axle Right, Rear Axle Left
• Height [mm]: 67
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Tagasild
• Kaal (kg): 0,09
• Pikkus (mm): 135
• vajaminev tükihulk: 2
• Välisläbimõõt 1 [mm]: 18
• Välisläbimõõt 2 [mm]: 15
• Üldine informatsioon: helper spring; rear
• Manufacturer: VIKA

• Installatsiooni pool: Tagasild
• Kaal (kg): 0,1
• Jämedus/Tugevus (mm): 104
• vajaminev tükihulk: 2
• Üldine informatsioon: helper spring; rear
• Manufacturer: VIKA

• Thickness [mm]: 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.04
• Name: SW 30 93 6728
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: JP GROUP
• Lisainfo: Tower rubber stop, rear
• Additional information: Tower rubber stop, rear

• Installatsiooni pool: esisild mõlemapoolselt
• Kõrgus (mm): 85
• Kaal (kg): 0,15
• Läbimõõt 1 (mm): 19
• Läbimõõt 2 (mm): 21
• Materjal: PU (Polyurethan)
• Manufacturer: METALCAUCHO

• for OE number: 8D0412131D
• Fitting Position: Front Axle
• Material: PU (Polyurethane)
• Weight [g]: 85
• Name: IM 37435
• Manufacturer: ORIGINAL IMPERIUM

• Installatsiooni pool: Tagasild
• Kaal (kg): 0,09
• Jämedus/Tugevus (mm): 134
• vajaminev tükihulk: 2
• Üldine informatsioon: helper spring; rear
• Manufacturer: VIKA

• Suspension: for vehicles with bad road version
• Fitting Position: Rear Axle
• Height [mm]: 67
• Required quantity: 2
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MAX

• Suspension: for vehicles without electronic suspension control
• for PR number: 1BE, 1BP, 1BT
• Block Separation:
• Thickness [mm]: 77
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.08
• Name: Puhver, vedrustus
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Name: PUHVER, VEDRUSTUS
• Manufacturer: LMI

• Production date from: 02/98
• Production date to: 07/01
• Fitting Position: Front Axle
• Height [mm]: 77
• for OE number: 8D0412131E
• Manufacturer: SASIC

• for OE number: 893512137
• Fitting Position: Rear Axle
• Height [mm]: 134
• Material: Thermoplast
• Weight [g]: 51
• Diameter 1 [mm]: 36
• Diameter 2 [mm]: 57
• Name: IM 37422
• Manufacturer: ORIGINAL IMPERIUM

• Seerianumber: ZWT-VW-030SK
• Manufacturer: NTY

• Fitting Position: Front Axle
• Height [mm]: 77
• Required quantity: 2
• replacement in pairs recommended:
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MEY

Suspension: for vehicles with bad road version, for vehicles with sports suspension

• for PR number: 1BG, 1BA
• Block Separation:
• Quantity per packing unit: 2
• Height [mm]: 100
• Fitting Position: Front Axle
• Diameter [mm]: 58
• Weight [kg]: 0.09
• Manufacturer: VAICO

Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Specification: Type: universal
• Diameter [mm]: 16
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• for PR number: 1BG, 1BA
• Block Separation:
• for combined PR number: 1BR+1BV
• Width [mm]: 58
• Thickness [mm]: 85
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.1
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Suspension: for vehicles with electronic suspension control
• Thickness [mm]: 157
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.05
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Height [mm]: 85
• Quantity Unit: Piece
• Required quantity: 2
• replacement in pairs recommended:
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MEY

Suspension: for vehicles without bad road version, for vehicles without sports suspension

• Fitting Position: Rear Axle
• Height [mm]: 134
• Suspension: for vehicles with bad road version
• Required quantity: 2
• replacement in pairs recommended:
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MEY

• Fitting Position: Rear Axle
• SVHC: No SVHC present!
• Manufacturer: FAG-ELEMENTY ZAWIESZENIA

• Fitting Position: Rear
• General Information: rear strut bump stop
• Manufacturer: BORSEHUNG

• Construction Year to: 05.2004
• Installatsiooni pool: Esisild
• Name: CFD PK4711
• Manufacturer: DACO

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with heavy duty suspension

• Fitting Position: Rear Axle
• Required quantity: 2
• Material: PU (Polyurethane)
• Weight [g]: 68
• Thickness [mm]: 67
• Name: IM 37512
• Manufacturer: ORIGINAL IMPERIUM

• Suspension: for vehicles with bad road version
• Fitting Position: Rear Axle
• Height [mm]: 67
• Required quantity: 2
• replacement in pairs recommended:
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MEY

• for OE number: 3B0512131K
• Fitting Position: Rear Axle
• Material: PU (Polyurethane)
• Weight [g]: 52
• Name: IM 35087
• Manufacturer: ORIGINAL IMPERIUM

• Suspension: for vehicles without electronic suspension control
• not for PR number: 1BE
• Thickness [mm]: 67
• Material: PU (Polyurethane)
• Fitting Position: Rear Axle
• Weight [kg]: 0.056
• Name: PUHVER, VEDRUSTUS
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Block Separation:
• Fitting Position: Front Axle
• for OE number: 4D0412137C
• Manufacturer: KAMOKA

Suspension: for vehicles with standard suspension, for vehicles with sports suspension

• for PR number: 1BG, 1BA, 1BH
• Block Separation:
• Thickness [mm]: 94
• Inner Diameter [mm]: 20.3
• Material: PU (Polyurethane)
• Fitting Position: Front Axle
• Weight [kg]: 0.09
• Manufacturer: FEBI

Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 12.2004
• Vehicle Identification Number (VIN) from: 4B#1#000001
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with bad road version
• Installatsiooni pool: Esisild
• Manufacturer: JAPKO

• Supplementary Article/Info 2: with protect screen
• Name: Rattakalde korrektuurkruvi
• Manufacturer: MAX

for PR number: 0N5, 0N6, 1BA, 1BC, 1BE, 1BG, 1BH, 1BP, 1BR, 1BT, 1BV, 1VG, 1VH, 1X1

• Model Year to: 2001
• Weight [kg]: 0.163
• Packaging length [cm]: 10.5
• Packaging width [cm]: 3.4
• Packaging height [cm]: 3.4
• Manufacturer: FEBEST

• Quantity: 2
• Installatsiooni pool: Esisild
• Üldine informatsioon: repair kit for shock absorber; front
• Manufacturer: VIKA

Fitting Position: Front Axle

• for PR number: 1BG, 1BA
• Block Separation:
• Fitting Position: Front Axle
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control

• Fitting Position: Front Axle
• for OE number: 4D0 412 137 C
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX
• Lisainfo: 72-1219
• Additional information: 72-1219

• Model Year to: 2001
• Weight [kg]: 0.18
• Packaging length [cm]: 12.8
• Packaging width [cm]: 3.8
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with bad road version
• Construction Year to: 12.2004
• Vehicle Identification Number (VIN) from: 4B#1#000001
• Installatsiooni pool: Esisild
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Manufacturer: MAGNETI MARELLI
• Name: MM APK0064

• Installatsiooni pool: Esisild, all
• Materjal: Kumm
• Manufacturer: AUTO-GH

• Installatsiooni pool: Tagasild
• Üldine informatsioon: repair kit for shock absorber; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• for OE number: 8D0412131F
• Manufacturer: KAMOKA AMORTYZATORY

• Installatsiooni pool: Tagasild
• Üldine informatsioon: repair kit for shock absorber; rear
• Manufacturer: VIKA

• Construction Year to: 12.2004
• Vehicle Identification Number (VIN) from: 4B#1#000001
• Spring Type: for vehicles without air suspension
• Suspension: for vehicles with bad road version
• Fitting Position: Front Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

• Fitting Position: Front Axle
• Material: Plastic, PU (Polyurethane)
• Weight [g]: 216
• Component Number: 4
• Name: IM 50135
• Manufacturer: ORIGINAL IMPERIUM

• Quantity: 2
• Installatsiooni pool: Tagasild
• Üldine informatsioon: repair kit for shock absorber; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Material: Plastic, PU (Polyurethane)
• Suspension: for vehicles with standard suspension
• Weight [g]: 189
• Component Number: 4
• Version: Standard
• Name: IM 50140
• Manufacturer: ORIGINAL IMPERIUM

• Construction Year to: 12.2004
• Vehicle Identification Number (VIN) from: 4B#1#000001
• Suspension: for vehicles with bad road version
• Spring Type: for vehicles without air suspension
• Quantity per packing unit: 2
• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: KYB
• Additional information: 915708 KYB
• Lisainfo: 915708 KYB

• Specification: Type: universal
• Diameter [mm]: 16
• Fitting Position: Front Axle
• Manufacturer: JPA

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid NISSAN P.

• Fitting Position: Front Axle
• for OE number: 8D0412131F
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: AUT
• Additional information: D5096
• Lisainfo: D5096

• Construction Year to: 05.2004
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Weight [kg]: 0.4
• Guarantee: 5 years guarantee
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension, for vehicles with heavy duty suspension

• for PR number: 1BG, 1BA
• Block Separation:
• for combined PR number: 1BR+1BV
• Material: PU (Polyurethane), Rubber
• Fitting Position: Front Axle
• Weight [kg]: 0.55
• Manufacturer: FEBI BILSTEIN

Suspension: for vehicles with electronic suspension control, for vehicles without electronic suspension control General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity Unit: Set
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MEY

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Quantity per axle: 1
• Manufacturer: SKF

Suspension: for vehicles with sports suspension, for vehicles with heavy duty suspension

• Fitting Position: Front Axle
• Height [mm]: 94
• Suspension: for vehicles with standard suspension
• for PR number: 1BA, 1BG, 1BH, 1BJ
• Quantity per packing unit: 2
• Quantity per axle: 1
• Manufacturer: SKF