• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Quantity: 1
• for PR number: 8Q3
• paaris tootenumbrid: 294731
• Netokaal [kg]: 0,14

• Vehicle Identification Number (VIN) to: 4B-X-120 000
• Piirangutega toode/piirangu info 2: koos kaanega
• vasak/paremroolimine: vasakpoolse roolimise jaoks
• Lisainfo: Brake fluid tank
• Additional information: Brake fluid tank

• for PR number: 8Q0, 8Q1, 8Q3
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, rear, left/right
• Additional information: ABS sensor, rear, left/right

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) from: 4B-2-079501
• Construction Year from: 01.2002
• Vehicle Equipment: for vehicles with headlight levelling (mechanical)
• for PR number: 8Q0, 8Q1
• Anduritüüp: passiivne andur
• Pikkus (mm): 1 250
• Pistiku värv: must
• Manufacturer: JP GROUP

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• for PR number: 8Q3
• Installatsiooni pool: Tagasild vasakul
• Anduritüüp: passiivne andur
• Pikkus (mm): 1 000
• Pistiku värv: must

• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Width [mm]: 11
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Fabrication Number: NZA-AU-001
• Manufacturer: NTY
• Name: NTY NZA-AU-001
• Lisainfo: 45 T 81 MM / 77 MM / 11 MM
• Additional information: 45 T 81 MM / 77 MM / 11 MM

• Fitting Position: Front Axle
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Thickness [mm]: 11
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Laius (mm): 11
• Hammastehulk: 45
• Välisläbimõõt [mm]: 81
• Siseläbimõõt [mm]: 77
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Width [mm]: 11
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Siseläbimõõt [mm]: 76,8
• Laius (mm): 11
• Välisläbimõõt [mm]: 80,7
• Hammastehulk ABS-rõngas: 45
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: VAG
• Additional information: VAG

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-013
• Rim Size [inch]: 16.0
• Manufacturer: NTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 950
• Number of pins: 2
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: with cable
• Fabrication Number: HCA-AU-010
• Manufacturer: NTY

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: HCA-AU-008
• Rim Size [inch]: 18.0
• Manufacturer: NTY

• Construction Year to: 08.2001
• Vehicle Identification Number (VIN) to: 4B..2..031 500
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• pikkus üle kõige (mm): 1 025
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Construction Year from: 09.2001
• Construction Year to: 06.2002
• Vehicle Identification Number (VIN) from: 4B..2..031 501
• Vehicle Identification Number (VIN) to: 4B..2..200 000
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Fitting Position: Rear Axle Right
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 930
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 1,035
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,035
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Installatsiooni pool: Tagasild paremal
• OE-numbri jaoks: 4B0 927 807
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Length [mm]: 930
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-AU-012
• Manufacturer: NTY

• Installatsiooni pool: Tagasild vasakul
• Pistikkontaktide arv: 3
• Manufacturer: KAMOKA

• Construction Year to: 08.2001
• Vehicle Identification Number (VIN) to: 4B2031500
• Brake Size: 16"
• Installatsiooni pool: esisild vasakul, esisild paremal
• Anduritüüp: passiivne andur
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Construction Year to: 09.2001
• Fitting Position: Front Axle
• Length [mm]: 1,040
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: red/black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Vehicle Identification Number (VIN) to: 4B-2-031 500
• Fitting Position: Front Axle both sides
• Number of connectors: 2
• Manufacturer: JPN

• Fitting Position: Front Axle Left, Front Axle Right
• Number of Teeth, ABS ring: 45
• Inner Diameter [mm]: 77
• Width [mm]: 11
• Manufacturer: METZGER

• Anduritüüp: passiivne andur
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 980
• Installatsiooni pool: esisild paremal, esisild vasakul
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0012

• Anduritüüp: passiivne andur
• Pistikkontaktide arv: 2
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaablipikkus (mm): 980
• Manufacturer: AUTOFREN SEINSA
• Name: SE DS0031

• Fitting Position: Rear Axle
• Length [mm]: 1,170
• Number of pins: 2
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• for PR number: 8Q3, 8Q1
• paaris tootenumbrid: 20-0071
• Pistikkontaktide arv: 2
• Pikkus (mm): 1 000
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

Vehicle Equipment: for vehicles without headlight levelling, for vehicles with headlight levelling (automatic)

• Fitting Position: Rear Axle
• Length [mm]: 930
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV025

• Fitting Position: Front Axle
• Length [mm]: 990
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: red/black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Rear Axle Right, Rear Axle Left
• for PR number: 8Q3, 8Q0, 8Q1
• Block Separation:
• Piirangutega toode/piirangu info 2: koos kaabliga
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 4B-2-031 500, 4B-2-200 000
• Rim Size [inch]: 17, 18
• Block Separation:
• Vehicle Identification Number (VIN) from: 4B-2-031 501
• Installatsiooni pool: esisild vasakul, esisild paremal
• Anduritüüp: Induktiivandur
• Lisainfo: ABS sensor, front, left/right
• Additional information: ABS sensor, front, left/right

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Construction Year to: 09.2001, 07.2002
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Block Separation:
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Construction Year to: 09.2001
• Fitting Position: Front Axle
• Length [mm]: 1,040
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: red/black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV012
• Manufacturer: ESEN SKV

• Construction Year to: 09.2001
• Vehicle Identification Number (VIN) to: 4B_2_031500, 4B-2-031500
• Vehicle Identification Number (VIN) from: 4B-X-060001
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 050
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX
• Lisainfo: 4B0927803C/MG
• Additional information: 4B0927803C/MG

• Vehicle Identification Number (VIN) from: 4B-3-000001
• Anduritüüp: passiivne andur
• vajaminev tükihulk: 2
• Kaablipikkus (mm): 985
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Pistikkontaktide arv: 3, 2
• Installatsiooni pool: Esisild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Rear Axle Left
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 945
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Construction Year from: 07.2002
• Construction Year to: 05.2004
• Vehicle Identification Number (VIN) from: 4B..3..000 001
• Installatsiooni pool: Esisild
• Anduritüüp: passiivne andur
• OE-numbri jaoks: 4B0927803E
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: 4B-X-060000
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 1 142
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Length [mm]: 990
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: red/black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV015

• for PR number: 8Q1, 8Q0, 8Q3
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Pikkus (mm): 990
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Nominaalpinge (V): 12
• vajaminev tükihulk: 2
• Kaablipikkus (mm): 930
• Anduritüüp: Aktiivne andur
• Ühenduste arv: 2
• Piirangutega toode/piirangu info 2: koos kaabliga
• Kaal (kg): 0,115
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• pikkus üle kõige (mm): 1 000
• Anduritüüp: Induktiivandur
• Installatsiooni sügavus (mm): 44
• OE-numbri jaoks: 4B0 927 807
• Manufacturer: MEAT&DORIA

• Fitting Position: Rear Axle, Rear Axle Right
• Required quantity: 2, 1
• Vehicle Identification Number (VIN) to: 4B-2-079500
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 220
• Pistikkontaktide arv: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• Vehicle Identification Number (VIN) to: 4B-X-120000, 4B-1-200000
• Block Separation:
• Piirangutega toode/piirangu info 2: koos kaanega, koos anduriga
• Materjal: Plastik
• jälgida süsteemi mahutavust:
• Manufacturer: TOPRAN

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, Rear Axle Right
• Construction Year to: 07.2004
• Block Separation:
• for PR number: 8Q3
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 1 000
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

Vehicle Equipment: for vehicles without headlight levelling, for vehicles with headlight levelling (automatic)

• Weight [kg]: 0.11
• Number of connectors: 2
• Required quantity: 2
• Fitting Position: Rear Axle
• General Information: ABS speed sensor; rear right
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Length [mm]: 1,170
• Number of pins: 2
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV022
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) to: 4B-2-031 500, 4B-2-200 000
• Rim Size [inch]: 17.0, 18.0
• Block Separation:
• Vehicle Identification Number (VIN) from: 4B-2-031 501
• Installatsiooni pool: Esisild
• Kõrgus (mm): 1 050, 28
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Nominaalpinge (V): 12
• Pikkus (mm): 1 060
• Ühenduste arv: 2
• mitmekordne: 3
• Piirangutega toode/piirangu info 2: koos kaabliga
• vajaminev tükihulk: 2
• Takistus [oom]: 1 630
• Kaablipikkus (mm): 975
• Montaaživiis: kruvitud
• Anduritüüp: Induktiivandur, passiivne andur
• Pistikkontaktide arv: 2
• Kaal (kg): 0,126
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 4B-2-031500, 4B-2-200000
• Rim Size [inch]: 17, 18
• Block Separation:
• Vehicle Identification Number (VIN) from: 4B-2-031501
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 1 060
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Piirangutega toode/piirangu info 2: koos kaanega, ilma andurita
• Name: Paisupaak,pidurivedelik
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 4B-3-000001
• Installatsiooni pool: esisild vasakul, esisild paremal
• Piirangutega toode/piirangu info 2: koos kaabliga
• Pikkus (mm): 1 067
• Piduri-/sõidudünaamika: Sõidukitele koos ABS-ga
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 1,010
• Sensor Type: Inductive Sensor
• Number of pins: 6
• Fitting Depth [mm]: 28
• Resistor [Ohm]: 1,630
• Manufacturer: ERA

• Construction Year from: 09.2001
• Construction Year to: 06.2002
• Anduritüüp: Induktiivandur
• Installatsiooni sügavus (mm): 28
• OE-numbri jaoks: 4B0 927 803 B
• Installatsiooni pool: esisild paremal, esisild vasakul
• pikkus üle kõige (mm): 1 010
• Pikkus (mm): 560
• Manufacturer: MEAT&DORIA

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Identification Number (VIN) from: 4B-X-120001
• Vehicle Identification Number (VIN) to: 4B-1-200000
• Materjal: Plastik
• Piirangutega toode/piirangu info 2: koos kaanega, koos anduriga
• jälgida süsteemi mahutavust:
• Manufacturer: TOPRAN HANS PRIES

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Construction Year to: 07.2004
• Fitting Position: Front Axle
• Required quantity: 2
• Rim Size [inch]: 17.0, 18.0
• Vehicle Identification Number (VIN) to: 4B_2_031500
• Kaablipikkus (mm): 970
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: HE 6PU012806841
• Manufacturer: HELLA

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Supplementary Article/Info 2: with cap
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• OE-numbri jaoks: 4B0 927 807
• Installatsiooni pool: Tagasild mõlemapoolselt
• Name: Andur, rattap””rete arv
• Manufacturer: TRU

• Installatsiooni pool: Tagasild paremal
• OE-numbri jaoks: 4B0927807Q
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle, Rear Axle Right
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Overall Length [mm]: 1,000
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 900
• paired article number: 30011
• Weight [kg]: 0.11
• Manufacturer: A.B.S.

• Construction Year to: 07.2004
• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 8Q0, 8Q1
• Kaablipikkus (mm): 930
• Anduritüüp: Induktiivandur
• Pistikkontaktide arv: 2
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Name: Andur, rattap””rete arv
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Vehicle Identification Number (VIN) from: 4B3000001
• Required quantity: 2
• Construction Year from: 07.2002
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK ABS VW P. A4 02- LE/PR 1050MM
• Manufacturer: BRM

• Vehicle Identification Number (VIN) to: 4B2031500
• Required quantity: 2
• Construction Year to: 08.2001
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Mounting Type: Bolted
• Manufacturer: BREMI

• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV136

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• for PR number: 8Q3
• Anduritüüp: passiivne andur
• kasutatud klemmide arv: 2
• Kaablipikkus (mm): 955
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20126

• for OE number: 8E0 611 301
• Width [mm]: 116.6
• Height [mm]: 61
• Length [mm]: 165
• Weight [g]: 109
• Guarantee: 3 years guarantee
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 4B-2-200 000
• Anduritüüp: passiivne andur
• Kaablipikkus (mm): 975
• Kulumishoiatus kontakt: kulumimärguande näidiku jaoks ettevalmistatud
• Pistikkontaktide arv: 2
• Installatsiooni pool: Esisild
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• OE-numbri jaoks: 4B0 927 803 B
• Installatsiooni pool: esisild mõlemapoolselt
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRU

• General Information: brake oil tank
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Rim Size [inch]: 17, 18
• Required quantity: 2
• Vehicle Identification Number (VIN) to: 4B_2_031500, 4B_2_200000
• Block Separation:
• Construction Year to: 06.2002
• Vehicle Identification Number (VIN) from: 4B_2_031501
• Kaablipikkus (mm): 1 012
• Installatsiooni sügavus (mm): 28,1
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI