• Construction Year to: 05.2004
• Oxygen Sensor: Regulating Probe
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 750
• Manufacturer: JP GROUP A/S
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 510
• Lambda andur: Titaanandur
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 620
• Lambda andur: soojendatud
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 480
• Lambda andur: Titaanandur
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Construction Year to: 05.2004
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 750
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 4B-2-000001
• Pistikkontaktide arv: 4
• Nominaalpinge (V): 12
• Lambda andur: Titaanandur, soojendatud
• Pistikukatte kuju: D-kuju
• Kaablipikkus (mm): 730
• pikkus üle kõige (mm): 757
• Võtmekaugus: 22
• Keermemõõt: M 18
• Keerme samm (mm): 1,5
• Piirangutega toode/piirangu info: Kaablisidemega
• Õlitus: koos rasvmäärdega
• Täiskomplekt:
• Manufacturer: TOPRAN HANS PRIES

Piirangutega toode/piirangu info 2: koos plastiksokliga, koos kuumakaitsetoruga, koos paigaldusjuhisega Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Regulating Probe
• Fitting Position: Left Front, Right Front
• Pikkus (mm): 940
• Ühenduste arv: 4
• Manufacturer: VERNET

• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Construction Year to: 05.2004
• Engine Code: BDV
• Voltage [V]: 12
• Length [mm]: 620
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV029

• Construction Year to: 05.2004
• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: Left, Right, Front, before catalytic converter
• Oxygen Sensor: Regulating Probe
• Kaablipikkus (mm): 700
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Kaablipikkus (mm): 909
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20178-12B1

• Fitting Position: Left Front, Right Front, after catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaablipikkus (mm): 720
• Lambda andur: Diagnoosisond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Kaal (kg): 0,156
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Kaablipikkus (mm): 1 530
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Takistus [oom]: 9
• Pikkus (mm): 721
• Ülekandeliinide arv: 4
• Ühendushulk: 4
• Kaablipikkus (mm): 721
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 1,750
• Number of circuits: 4
• Manufacturer: ERA

• Engine Code: BDV
• Construction Year to: 05.2004
• Lambda andur: Sond
• Installatsiooni pool: katalüsaatori ees
• Pikkus (mm): 700
• tehnilise informatsiooni number: Universal 77015
• Manufacturer: FAE

• Fitting Position: Left, Right
• Construction Year to: 05.2004
• Lambda andur: kütmata
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 1 050
• Kvaliteet: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fitting Position: Left, Right, Front, before catalytic converter
• Oxygen Sensor: Regulating Probe
• Kaablipikkus (mm): 740
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 05.2004
• Oxygen Sensor: Oxygen Sensor
• Voltage [V]: 12
• Length [mm]: 980
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV641

• Engine Code: AMM
• Fitting Position: Left, Right
• Block Separation:
• OE-numbri jaoks: 078 906 265 M
• Ühendushulk: 4
• Pistikukatte kuju: D-kuju
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 670
• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Väljalaskesüsteem: katalüsaatori ees
• Kaal (kg): 0,121
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Ühendushulk: 4
• Ülekandeliinide arv: 4
• Pikkus (mm): 1 731
• Takistus [oom]: 9
• Kaablipikkus (mm): 1 731
• Lambda andur: soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: BDV
• Oxygen Sensor: Regulating Probe
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Lambda andur: Sõrmesensor, soojendatud, Keere eelmääritud
• Pistikkontaktide arv: 4
• OE-numbri jaoks: V99760001
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Pikkus (mm): 350
• Väljalaskesüsteem: pärast katalüsaatorit
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: for pre-catalytic converter
• Kaablipikkus (mm): 954
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20169-12B1

• Construction Year to: 05.2004
• Oxygen Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Quantity: 2
• Fitting Position: before catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2004
• Engine Code: BDV
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Ühendushulk: 4
• Pistikukatte kuju: D-kuju
• Kaablipikkus (mm): 225
• Keermemõõt: M18 x 1,5
• Pikkus (mm): 350
• Pistikkontaktide arv: 4
• Versioon: ZR-PLANAR
• Kaal (kg): 0,129
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2004
• Fitting Position: Left
• Oxygen Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 93
• Brutokaal [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Construction Year to: 05.2004
• Fitting Position: Left, Right
• Block Separation:
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Pistikkontaktide arv: 4
• Pistiku värv: must
• Pistikukatte kuju: D-kuju
• Kaal (kg): 0,138
• Pikkus (mm): 700
• OE-numbri jaoks: 030 906 262 L
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 700
• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Väljalaskesüsteem: katalüsaatori ees
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Kaablipikkus (mm): 1 200
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Construction Year to: 05.2004
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 1 760
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: BDV
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• pikkus üle kõige (mm): 1 800
• Pistikkontaktide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Kaal (kg): 0,166
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2004
• Engine Code: BDV
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaal (kg): 0,122
• Pistiku värv: pruun
• Pistikukatte kuju: D-kuju
• Keermemõõt: M18 x 1,5
• Pikkus (mm): 570
• OE-numbri jaoks: 06A 906 262 F
• Kaablipikkus (mm): 570
• Pistikkontaktide arv: 4
• Lambda andur: Diagnoosisond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Väljalaskesüsteem: pärast katalüsaatorit
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2004
• Fitting Position: Left
• Oxygen Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• OE-numbri jaoks: 06C906265
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 800
• Pistikkontaktide arv: 4
• Kaal (g): 115
• Brutokaal [g]: 148
• Manufacturer: DENSO
• Name: DN DOX-2008
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Lambda andur: soojendatud
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 1 760
• Kaal (kg): 0,155
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 07.2004
• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Lambda andur: Titaanandur
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PA358066401

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 05.2004
• Oxygen Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 1 760
• ka universaaltootena saadav vaata toode-nr.: 0258986615
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Engine Code: AMM
• Fitting Position: Left, after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaablipikkus (mm): 1 500
• Ülekandeliinide arv: 4
• Kaal (kg): 0,219
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda andur: Sond
• Pikkus (mm): 1 700
• Pistikkontaktide arv: 4
• Piirangutega toode/piirangu info 2: koos paigaldusjuhisega
• Manufacturer: FAE

• Construction Year to: 07.2004
• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Lambda andur: Sond
• Kaablipikkus (mm): 1 750
• Pistikkontaktide arv: 4
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Oxygen Sensor: Heated
• Number of pins: 4
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 05.2004
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 1 800
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Kaal (kg): 0,23
• Manufacturer: VALEO

• Construction Year to: 05.2004
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 760
• ka universaaltootena saadav vaata toode-nr.: 0258986615
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 05.2004
• Installatsiooni pool: katalüsaatori ees
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 720
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Kaal (kg): 0,17
• Manufacturer: VALEO
• Name: VA 368041

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV911

• Construction Year to: 07.2004
• Fitting Position: Left, Right, Front, after catalytic converter
• Oxygen Sensor: Diagnostic Probe
• Lambda andur: Lineaarne lambda andur
• Kaablipikkus (mm): 800
• Pistikkontaktide arv: 6
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Name: Lambda andur
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BDV
• Fitting Position: Left, Right
• Oxygen Sensor: Regulating Probe
• Lambda andur: soojendatud
• Pinge [V]: 12
• Ühendushulk: 4
• Kaablipikkus (mm): 940
• Manufacturer: PIERBURG