• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 750
• Manufacturer: JP GROUP A/S
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 510
• Lambda andur: Titaanandur
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 620
• Lambda andur: soojendatud
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Väliskeere [mm]: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 480
• Lambda andur: Titaanandur
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Tootja piirang: VAG
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 200
• Asetuslaius (mm): 1,5
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• Kokkupuutepind: kullatud
• Kaabli ristlõige [mm²]: 0,75
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• juhtmeisolatsiooni materjal: Silikoon
• Pistiku kesta tüüp: Pistikuhülsi korpus
• SVHC: SVHS aineid ei esine
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE

• Engine Code: ARE
• Vehicle Identification Number (VIN) to: 4B-1-200 000
• Lambda andur: Diagnoosisond
• Ülekandeliinide arv: 4
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Ülekandeliinide arv: 4
• Lambda andur: Sond
• Manufacturer: KAMOKA

• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 750
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Left Front, Right Front
• Pikkus (mm): 940
• Ühenduste arv: 4
• Manufacturer: VERNET

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Engine Code: ARE, BES
• Voltage [V]: 12
• Length [mm]: 620
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV029

• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 4B-2-000001
• Pistikkontaktide arv: 4
• Nominaalpinge (V): 12
• Lambda andur: Titaanandur, soojendatud
• Pistikukatte kuju: D-kuju
• Kaablipikkus (mm): 730
• pikkus üle kõige (mm): 757
• Võtmekaugus: 22
• Keermemõõt: M 18
• Keerme samm (mm): 1,5
• Piirangutega toode/piirangu info: Kaablisidemega
• Õlitus: koos rasvmäärdega
• Täiskomplekt:
• Manufacturer: TOPRAN HANS PRIES

Piirangutega toode/piirangu info 2: koos plastiksokliga, koos kuumakaitsetoruga, koos paigaldusjuhisega Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 2
• Lambda Sensor: Heated
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Number of pins: 4
• Overall Length [mm]: 750
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Exhaust System: for pre-catalytic converter
• Kaablipikkus (mm): 909
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20178-12B1

• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Kaablipikkus (mm): 1 530
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Lambda andur: kütmata
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 630
• Kvaliteet: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe
• Kaablipikkus (mm): 700
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe
• Required quantity: 2
• Lambda andur: kütmata
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 1 050
• Kvaliteet: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 980
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV641

• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe
• Kaablipikkus (mm): 740
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Block Separation:
• Ülekandeliinide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: ARE, BES
• Lambda Sensor: Regulating Probe
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Lambda andur: Sõrmesensor, soojendatud, Keere eelmääritud
• Pistikkontaktide arv: 4
• OE-numbri jaoks: V99760001
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Pikkus (mm): 350
• Väljalaskesüsteem: pärast katalüsaatorit
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Left Front, Right Front, after catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaablipikkus (mm): 720
• Lambda andur: Diagnoosisond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Kaal (kg): 0,156
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: after catalytic converter
• Kaablipikkus (mm): 954
• Lambda andur: Titaanandur, soojendatud
• Manufacturer: DELPHI
• Name: DE ES20169-12B1

• Construction Year to: 06.2002
• Vehicle Identification Number (VIN) from: 4B-2-000 001
• Quantity: 2
• Fitting Position: before catalytic converter
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Lambda andur: Titaanandur, soojendatud, Keere eelmääritud
• Piirangutega toode/piirangu info: pressliidesega, surve-pressliidesega
• Kaablipikkus (mm): 210
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2004
• Engine Code: ARE,BES
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Ühendushulk: 4
• Pistikukatte kuju: D-kuju
• Kaablipikkus (mm): 225
• Keermemõõt: M18 x 1,5
• Pikkus (mm): 350
• Pistikkontaktide arv: 4
• Versioon: ZR-PLANAR
• Kaal (kg): 0,129
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ARE
• Construction Year to: 06.2002
• Fitting Position: Left
• Lambda Sensor: Diagnostic Probe
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Kaal (g): 93
• Brutokaal [g]: 140
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Kaablipikkus (mm): 1 200
• Lambda andur: Titaanandur, soojendatud
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Construction Year to: 06.2002, 05.2004
• Engine Code: ARE, BES
• Fitting Position: Left, Right
• Block Separation:
• Construction Year from: 07.2002
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Pistikkontaktide arv: 4
• Pistiku värv: must
• Pistikukatte kuju: D-kuju
• Kaal (kg): 0,138
• Pikkus (mm): 700
• OE-numbri jaoks: 030 906 262 L
• Keermemõõt: M18 x 1,5
• Kaablipikkus (mm): 700
• Lambda andur: Sond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Väljalaskesüsteem: katalüsaatori ees
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: ARE, BES
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• pikkus üle kõige (mm): 1 800
• Pistikkontaktide arv: 4
• Soovituslik vahetusintervall (km): 160 000
• Kaal (kg): 0,166
• Lambda andur: Keere eelmääritud
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2004
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Lambda andur: soojendatud
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 1 760
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda andur: soojendatud
• Väliskeerme mõõde: M18 x 1,5
• Võtmekaugus: 22
• Ülekandeliinide arv: 4
• Kaablipikkus (mm): 1 760
• Kaal (kg): 0,155
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ARE
• Construction Year to: 06.2002
• Fitting Position: Left
• Lambda Sensor: Diagnostic Probe
• OE-numbri jaoks: 06C906265
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 800
• Pistikkontaktide arv: 4
• Kaal (g): 115
• Brutokaal [g]: 148
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Lambda andur: Titaanandur
• Kaablipikkus (mm): 750
• Pistikkontaktide arv: 4
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PA358066401

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 05.2004
• Lambda Sensor: Diagnostic Probe
• Fitting Position: after catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 1 760
• ka universaaltootena saadav vaata toode-nr.: 0258986615
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Quantity: 2
• Lambda andur: soojendatud
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Pistikkontaktide arv: 4
• pikkus üle kõige (mm): 750
• Üldine informatsioon: lambda probe
• Manufacturer: BORSEHUNG

• Engine Code: ARE
• Construction Year to: 06.2002
• Fitting Position: Left
• Lambda Sensor: Diagnostic Probe
• OE-numbri jaoks: 030906262N
• Kvaliteet: OE
• Tootja piirang: DENSO
• Keermemõõt: M18x1.5
• Kaablipikkus (mm): 1 900
• Pistikkontaktide arv: 4
• Kaal (g): 115
• Brutokaal [g]: 148
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda andur: soojendatud, Titaanandur, Keere eelmääritud, Bistabiilne andur Additional information: "Tootja: DENSO
LUPO (6X1, 6E1), 09.
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
LUPO (6X1, 6E1), 09.
(kvaliteediklass: Q)"

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Lambda andur: Sond
• Kaablipikkus (mm): 1 750
• Pistikkontaktide arv: 4
• Monteerimist/demonteerimist peab tegema spetsialist!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 05.2004
• Installatsiooni pool: katalüsaatori ees, pärast katalüsaatorit
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 1 800
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Manufacturer: VALEO

• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Ülekandeliinide arv: 4
• pikkus üle kõige (mm): 760
• ka universaaltootena saadav vaata toode-nr.: 0258986615
• Soovituslik vahetusintervall (km): 160 000
• Ühendus/klemm: vajadusel kohandada pistikühendus
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year to: 05.2004
• Installatsiooni pool: katalüsaatori ees
• Lambda andur: Titaanandur, Keere eelmääritud, soojendatud
• Pistikkontaktide arv: 4
• Kaablipikkus (mm): 720
• Keermemõõt: M18x1,5
• Lülitusrõhk [bar]: 4
• Pistikukatte kuju: ovaalne
• Manufacturer: VALEO
• Name: VA 368041

• Construction Year to: 05.2004
• Engine Code: ARE,BES
• Kaabliisolatsiooni tüüp: silikoonitud kiudoptilise võrgu isolatsiooniga
• Kaal (kg): 0,122
• Pistiku värv: pruun
• Pistikukatte kuju: D-kuju
• Keermemõõt: M18 x 1,5
• Pikkus (mm): 570
• OE-numbri jaoks: 06A 906 262 F
• Kaablipikkus (mm): 570
• Pistikkontaktide arv: 4
• Lambda andur: Diagnoosisond, Keere eelmääritud
• Ülekandeliinide arv: 4
• Väljalaskesüsteem: pärast katalüsaatorit
• Manufacturer: VEMO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity: 2
• Lambda Sensor: Heated
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Number of pins: 4
• Overall Length [mm]: 1,760
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: ARE, BES
• Fitting Position: Left, Right
• Lambda Sensor: Regulating Probe
• Block Separation:
• Lambda andur: soojendatud
• Pinge [V]: 12
• Ühendushulk: 4
• Kaablipikkus (mm): 940
• Manufacturer: PIERBURG

• Lambda Sensor: Lambda Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.16
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV911

• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe
• Lambda andur: Lineaarne lambda andur
• Kaablipikkus (mm): 800
• Pistikkontaktide arv: 6
• Monteerimist/demonteerimist peab tegema spetsialist!:
• SVHC: 7439-92-1; plii
• Name: Lambda andur
• Manufacturer: HEL

Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.