• Number of pins: 3
• Socket colour: green
• Fabrication Number: ESS-AU-000
• Manufacturer: NTY

• Engine Code: BCY
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Fabrication Number: ECP-AU-003
• Manufacturer: NTY

• Cable Length [mm]: 730
• Manufacturer: KAMOKA

• Sensor Type: Active sensor
• for OE number: 058 905 161 B
• Manufacturer: KAMOKA

• Construction Year to: 04.2004
• Thread Size: M12x1,5
• Name: Andur,sisendohu temperatuur
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Colour Coding: green
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA109

• Pressure from [kPA]: 20
• Pressure to [kPA]: 25
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Engine Code: BCY
• Housing Colour: green
• Cable Length [mm]: 800
• Name: DETONATSIOONIANDUR
• Manufacturer: MAX

• Engine Number to: 370998
• Sensor Type: Hall Sensor
• Number of connectors: 3
• Manufacturer: VERNET

• Construction Year to: 05.2004
• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Sensor Type: Hall Sensor
• for OE number: 058905161B
• Manufacturer: DELLO AUTOMEGA

• Number of pins: 4
• Connector Shape: D Shape
• Sensor Type: NTC Sensor
• for OE number: 1111222
• Manufacturer: DELLO AUTOMEGA

• Diameter [mm]: 25
• Length [mm]: 50
• Weight [kg]: 0.02, 0.2
• Supplementary Article/Supplementary Info: with seal
• for OE number: 059 919 501
• Spring Design: Retaining Spring
• Number of pins: 4
• Connector Shape: angular
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Voltage [V]: 12
• Number of pins: 3
• Name: Andur,steimpulss
• Manufacturer: MAX

• Number of pins: 4
• Housing Colour: blue
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Number of pins: 3
• Sensor Type: Hall Sensor
• Supplementary Article/Info 2: without cable
• Quality: OE EQUIVALENT
• Name: Andur,Nukkvollipositsioon
• Manufacturer: MD

• Construction Year to: 04.2004
• Number of pins: 4
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: MAX

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: Alfa Romeo, Fiat, VAG
• Number of pins: 2
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Number of pins: 2
• Housing Colour: black
• Thread Size: M 12x1,5
• Manufacturer: FAE

• Thread Size: M12x1.5
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: VER

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Required quantity: 1
• Name: CZUJNIK CI—N. POWIETRZA
• Manufacturer: BRM

• Sensor Type: Hall Sensor
• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: MEY

• Construction Year from: 09.2002
• Construction Year to: 04.2004
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: without cable pull
• Number of pins: 4
• Weight [kg]: 0.04
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 17SKV127

• Voltage [V]: 12
• Number of pins: 3
• Tightening Torque [Nm]: 20
• Supplementary Article/Info 2: with cable
• Corresponds to the original part in colour: black
• Plug Type: Blade Terminal
• Length [mm]: 743
• Connector Shape: rectangular
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PG013114391
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Number of connectors: 4
• Weight [kg]: 0.03
• for OE number: 038 906 051
• Name: SW 33 10 4998
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: TRI

• Construction Year to: 04.2004
• Name: ANDUR,SISENDOHU TEMPERATUUR
• Manufacturer: BOS

• Voltage [V]: 12
• Sensor Type: Hall Sensor
• Number of pins: 3
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PU012681021
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Number of pins: 4
• Name: Andur,ohuvotu rohk
• Manufacturer: MEY
• Lisainfo: 1148120006
• Additional information: 1148120006

• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Sensor Type: Hall Sensor
• Manufacturer: FAE

• Construction Year to: 04.2004
• Manufacturer: BOSCH

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Construction Year to: 04.2004
• Sensor Type: Hall Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: without cable
• Weight [kg]: 0.09
• Manufacturer: VALEO
• Name: VA 253814

• Lambda Sensor: Diagnostic Probe
• Construction Year to: 04.2004
• Engine Code: BCY
• Voltage [V]: 12
• Length [mm]: 1,440
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV079

• Construction Year to: 04.2004
• Quality class: PJ
• Name: Air flow sensor

• Construction Year to: 04.2004
• Lambda Sensor: Diagnostic Probe, Regulating Probe, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: Left, Right, before catalytic converter, after catalytic converter

• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Construction Year to: 04.2004
• Voltage [V]: 12
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

Exhaust System: after catalytic converter, before catalytic converter

• Lambda Sensor: Diagnostic Probe
• Construction Year to: 04.2004
• Engine Code: BCY
• Voltage [V]: 12
• Length [mm]: 1,435
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV078
• Manufacturer: ESEN SKV

• Length [mm]: 1,690
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 1,690
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Mounting Type: Bolted
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Name: Andur,kompressorirohk
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: BCY
• Required quantity: 2
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Diagnostic Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 04.2004
• Number of pins: 4
• Pressure [Pa] from: 11,000
• Pressure [Pa] to: 254,000
• Article number of recommended accessories: 2324099
• Manufacturer: METZGER

• Block Separation:
• Cable Length [mm]: 620
• Manufacturer: DELPHI
• Name: DE ES20160-12B1

Fitting Position: Left, Right, Front, before catalytic converter, after catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Planar probe, Heated

Manufacturer: MAGNETI MARELLI

• Construction Year to: 04.2004
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: after catalytic converter, Left, Right, before catalytic converter

• Fitting Position: Right, after catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: BCY
• Pressure from [kPA]: 11
• Pressure to [kPA]: 254
• Output Voltage, from [V]: 0.25
• Output Voltage, up to [V]: 4.75
• Name: EP 1.993.012
• Manufacturer: EPS

• Fitting Position: Left
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Number of pins: 6, 5
• Name: Ohumassimootja
• Manufacturer: MAX

• Construction Year to: 04.2004
• Name: ANDUR,KOMPRESSORIROHK
• Manufacturer: BOS

• Exhaust System: for pre-catalytic converter
• Cable Length [mm]: 2
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20164-12B1

• Housing Type: with housing
• Number of pins: 5
• Plug Type: Male
• Housing Colour: black
• Voltage [V]: 12
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: DLP

• Construction Year to: 04.2004
• Name: ANDUR,NUKKVOLLIPOSITSIOON
• Manufacturer: BOS

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Fitting Position: Left
• for OE number: 078906265P, 58906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,690
• Number of pins: 4
• Weight [g]: 160
• Gross Weight [g]: 193
• Manufacturer: DENSO
• Name: DN DOX-2035

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Construction Year to: 04.2004
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Number of circuits: 8
• Overall Length [mm]: 560
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Operating Mode: Electric
• Name: OHUMASSIMOOTJA
• Manufacturer: MAG

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Automatic Transmission
• Left-/right-hand drive vehicles: for right-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of mounting bores: 3
• Number of pins: 6
• Transmission Type: Manual Transmission
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Assy./disassy. by qualified personnel required!:
• Name: ANDUR, SOIDUPEDAALIASEND
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 04.2004
• Recommended additional repairs: Air Filter
• Name: OHUMASSIMOOTJA
• Manufacturer: BOS