• Engine Code: AMM
• Construction Year from: 06.2001
• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe
• Number of circuits: 4
• Overall Length [mm]: 750
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 510
• Lambda Sensor: Planar probe
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 620
• Lambda Sensor: Heated
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: AMM
• Construction Year from: 06.2001
• Construction Year to: 05.2004
• Fitting Position: Left
• for OE number: 06A906262AQ
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,525
• Number of pins: 4
• Weight [g]: 117
• Gross Weight [g]: 150
• Name: DN DOX-2023
• Manufacturer: DENSO

Lambda Sensor: Diagnostic Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
POLO VARIANT (6KV5),
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
POLO VARIANT (6KV5),
(kvaliteediklass: Q)"

• Lambda Sensor: Lambda Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-011
• Manufacturer: NTY
• Name: NTY ESL-AU-011

• Lambda Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-003

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Vehicle Identification Number (VIN) from: 4B-X-067801
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 4B-X-067 800
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe
• Length [mm]: 355
• Number of pins: 4
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: AMM, APZ
• Lambda Sensor: Diagnostic Probe
• Number of circuits: 4
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Vehicle Identification Number (VIN) from: 4B-X-067800
• Number of pins: 4
• Lambda Sensor: Heated
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• External Thread [mm]: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 480
• Lambda Sensor: Planar probe
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: AJG, APZ
• Construction Year from: 04.1997, 11.1998
• Construction Year to: 07.1998, 12.1998
• Lambda Sensor: Regulating Probe, Lambda Sensor
• Block Separation:
• Vehicle Identification Number (VIN) to: 4B..X..067801
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Lambda Sensor
• Weight [kg]: 0.12
• Warranty: 3 years warranty
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Engine Code: AMM
• Construction Year from: 06.2001
• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 750
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Lambda Sensor: Regulating Probe, Heated
• Vehicle Identification Number (VIN) from: 4B-X-067801
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Length [mm]: 1,500
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: APZ
• Construction Year from: 12.1998
• Construction Year to: 05.2000
• Lambda Sensor: Regulating Probe, Heated
• Vehicle Identification Number (VIN) from: 4B..X..068801
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Name: Lambda andur
• Manufacturer: MAX

• Lambda Sensor: Diagnostic Probe
• Construction Year from: 05.1997
• Construction Year to: 05.2001
• Engine Code: AMM
• Voltage [V]: 12
• Length [mm]: 1,440
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV079

• Lambda Sensor: Regulating Probe, Lambda Sensor
• Construction Year from: 06.2001
• Engine Code: AMM
• Voltage [V]: 12
• Length [mm]: 620
• Number of circuits: 4
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV029

• Engine Code: APZ, AMM
• Construction Year from: 12.1998, 06.2001
• Construction Year to: 05.2000, 05.2004
• Lambda Sensor: Regulating Probe, Diagnostic Probe, Heated
• Vehicle Identification Number (VIN) from: 4B..X..068801
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: before catalytic converter, after catalytic converter

• Construction Year to: 12.1998
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Vehicle Identification Number (VIN) to: 4B-X-067 801
• Engine Code: AJG, APZ
• Cable Length [mm]: 620
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)"

• Lambda Sensor: Regulating Probe
• Construction Year from: 12.1998
• Construction Year to: 05.2000
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Weight [kg]: 0.11
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY

• Resistor [Ohm]: 3.5
• Conductor Number: 4
• Number of circuits: 4
• Length [mm]: 520
• Cable Length [mm]: 520
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 06.2001
• Engine Code: AMM
• Lambda Sensor: Regulating Probe
• Exhaust System: before catalytic converter
• Fitting Position: Left Front, Right Front
• Vehicle Identification Number (VIN) from: 4B2000001
• Length [mm]: 940
• Number of connectors: 4
• Manufacturer: VERNET

• Cable Length [mm]: 909
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20178-12B1

• Lambda Sensor: Diagnostic Probe
• Construction Year from: 05.1997
• Construction Year to: 05.2001
• Engine Code: AMM
• Voltage [V]: 12
• Length [mm]: 1,435
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV078
• Manufacturer: ESEN SKV

• Construction Year from: 06.2001
• Engine Code: AMM
• Vehicle Identification Number (VIN) from: 4B2000001
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 720
• Number of circuits: 4
• Weight [kg]: 0.156
• Manufacturer: VEMO GERMANY

Fitting Position: Left Front, Right Front, before catalytic converter Lambda Sensor: Regulating Probe, Diagnostic Probe, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 06.2001
• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Engine Code: AMM
• Vehicle Identification Number (VIN) from: 4B2000001
• Alternatively:
• Cable Length [mm]: 2
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A3 (8L1), 09.96-05.0
(kvaliteediklass: PJ)"

• Lambda Sensor: Lambda Sensor
• Cable Length [mm]: 1,750
• Number of circuits: 4
• Manufacturer: ERA

• Construction Year from: 01.1999
• Construction Year to: 05.2001
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 885
• Number of circuits: 4
• Weight [kg]: 0.19
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV599
• Manufacturer: ESEN SKV

• Engine Code: AMM
• Construction Year from: 06.2001
• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe, Unheated
• Fitting Position: Exhaust Manifold
• Number of pins: 4
• Cable Length [mm]: 630
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Fitting Position: Right, Left
• Construction Year from: 06.2001
• Construction Year to: 05.2004
• Engine Code: AMM
• Lambda Sensor: Unheated
• Number of pins: 4
• Cable Length [mm]: 1,050
• Quality: OE EQUIVALENT
• Manufacturer: MEAT&DORIA

• Engine Code: AJG, APZ
• Construction Year from: 04.1997, 11.1998
• Construction Year to: 07.1998, 12.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Vehicle Identification Number (VIN) to: 4B..X..067 801
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 06.2001
• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: AMM
• Vehicle Identification Number (VIN) from: 4B2000001
• Cable Length [mm]: 700
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
BORA (1J2), 10.98-09
(kvaliteediklass: PJ)"

• Resistor [Ohm]: 9
• Conductor Number: 4
• Length [mm]: 721
• Number of circuits: 4
• Cable Length [mm]: 721
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 06.2001
• Lambda Sensor: Lambda Sensor
• Voltage [V]: 12
• Length [mm]: 980
• Number of circuits: 4
• Weight [kg]: 0.17
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Manufacturer: SKV GERMANY
• Name: CE 09SKV641

• Resistor [Ohm]: 9
• Number of circuits: 4
• Length [mm]: 1,731
• Conductor Number: 4
• Cable Length [mm]: 1,731
• Lambda Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 06.2001
• Fitting Position: Left, Right, Front, before catalytic converter
• Lambda Sensor: Regulating Probe, Planar probe, Heated
• Engine Code: AMM
• Vehicle Identification Number (VIN) from: 4B2000001
• Cable Length [mm]: 740
• Name: LAMBDA ANDUR
• Manufacturer: DLP

• Construction Year from: 01.1999
• Construction Year to: 05.2001
• Lambda Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 630
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Warranty: 3 years warranty
• Name: CE 09SKV616
• Manufacturer: ESEN SKV

• Engine Code: AMM
• Construction Year to: 12.1998
• Vehicle Identification Number (VIN) to: 4BX067800
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Exhaust System: for pre-catalytic converter
• Vehicle Identification Number (VIN) from: 4B-X-068801
• Cable Length [mm]: 620
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20160-12B1

• Engine Code: APZ, AMM
• Construction Year from: 12.1998, 06.2001
• Construction Year to: 05.2000, 05.2004
• Lambda Sensor: Regulating Probe, Diagnostic Probe
• Vehicle Identification Number (VIN) from: 4B..X..068 801
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Exhaust System: for pre-catalytic converter
• Vehicle Identification Number (VIN) from: X..067 801
• Cable Length [mm]: 954
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20169-12B1

• Construction Year from: 06.2001
• Fitting Position: Left, after catalytic converter
• Engine Code: AMM
• Line insulation design: with silicone-coated woven-fibre insulation
• Lambda Sensor: Planar probe, Heated, Thread pre-greased
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year from: 06.2001
• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Planar probe, Heated
• Engine Code: AMM
• Vehicle Identification Number (VIN) from: 4B2000001
• Cable Length [mm]: 1
• Name: LAMBDA ANDUR
• Manufacturer: DLP

Additional information: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
OCTAVIA (1U2), 09.96
(kvaliteediklass: PJ)"

• Vehicle Identification Number (VIN) to: 4B-X-067 800
• Lambda Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 570
• Number of pins: 4
• Fitting Position: before catalytic converter
• Name: Lambda andur
• Manufacturer: MEY

• Engine Code: AJG
• Construction Year from: 12.1998
• Construction Year to: 01.1999
• Fitting Position: Left
• Vehicle Identification Number (VIN) from: X-067 801
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: AMM
• Construction Year from: 06.2001
• Construction Year to: 05.2004
• Lambda Sensor: Diagnostic Probe, Heated
• Fitting Position: after catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,760
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Engine Code: AMM
• Line insulation design: with silicone-coated woven-fibre insulation
• Overall Length [mm]: 1,800
• Number of pins: 4
• Recommended change interval [km]: 160,000
• Weight [kg]: 0.166
• Lambda Sensor: Thread pre-greased
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: AMM
• Fitting Position: before catalytic converter
• Lambda Sensor: Regulating Probe, Heated
• Model Year from: 2001
• Model Year to: 2004
• Length [mm]: 645
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 740
• Weight [kg]: 0.095
• Name: SW 30 93 4388
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AMM
• Construction Year from: 06.2001
• Construction Year to: 05.2004
• Lambda Sensor: Regulating Probe
• Length [mm]: 700
• Technical Information Number: Universal 77015
• Fitting Position: before catalytic converter
• Manufacturer: FAE

• Construction Year from: 06.2001
• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Planar probe
• Engine Code: AMM
• Vehicle Identification Number (VIN) from: 4B_2_000001
• Cable Length [mm]: 750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year from: 06.2001
• Construction Year to: 05.2004
• Engine Code: AMM
• Line insulation design: with silicone-coated woven-fibre insulation
• Weight [kg]: 0.122
• Socket colour: brown
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Length [mm]: 570
• for OE number: 06A 906 262 F
• Cable Length [mm]: 570
• Number of pins: 4
• Lambda Sensor: Diagnostic Probe, Thread pre-greased
• Number of circuits: 4
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: X-067 800
• Engine Code: AJG,APZ
• Fitting Position: before catalytic converter
• Lambda Sensor: Planar probe, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 570
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Weight [kg]: 0.15
• Name: VA 368478
• Manufacturer: VALEO

• Engine Code: APZ, AJG
• Vehicle Identification Number (VIN) to: 4B-X-067800
• Fitting Position: Front, before catalytic converter
• Construction Year to: 12.1998
• Lambda Sensor: Regulating Probe
• Length [mm]: 620
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year from: 06.2000
• Construction Year to: 04.2001
• Fitting Position: Left, after catalytic converter
• Engine Code: AMM
• Cable Length [mm]: 2
• Lambda Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20164-12B1

• Engine Code: AJG
• Construction Year from: 12.1998
• Construction Year to: 01.1999
• Fitting Position: Left
• Vehicle Identification Number (VIN) from: X-067 801
• Exhaust System: for pre-catalytic converter
• for OE number: 078906265M
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 154
• Gross Weight [g]: 187
• Manufacturer: DENSO
• Quality class: Q
• Name: Lambda sensor

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"

• Engine Code: AMM
• Construction Year from: 06.2001
• Construction Year to: 05.2004
• Exhaust System: for pre-catalytic converter
• for OE number: 06C906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 800
• Number of pins: 4
• Weight [g]: 115
• Gross Weight [g]: 148
• Manufacturer: DENSO
• Name: DN DOX-2008
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Lambda Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Lambda Sensor: Heated
• Overall Length [mm]: 1,700
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Construction Year from: 06.2001
• Fitting Position: Left, Right, Front, after catalytic converter
• Lambda Sensor: Diagnostic Probe, Regulating Probe
• Engine Code: AMM
• Vehicle Identification Number (VIN) from: 4B_2_000001
• Cable Length [mm]: 1,750
• Number of pins: 4
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PA358066391

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Engine Code: AJG, APZ
• Construction Year from: 04.1997, 11.1998
• Construction Year to: 07.1998, 12.1998
• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Vehicle Identification Number (VIN) to: 4B..X..067 801
• Number of circuits: 4
• Overall Length [mm]: 550
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH
• Name: BS 0258003759

• Connector/Clamp: Connector may need adjustment
• Lambda Sensor: Heated
• Overall Length [mm]: 750
• Number of pins: 4
• Recommended change interval [km]: 160,000
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Overall Length [mm]: 750
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Connector/Clamp: Connector may need adjustment
• Lambda Sensor: Heated
• General Information: lambda probe
• Manufacturer: BORSEHUNG

• Engine Code: AMM
• Construction Year from: 06.2000
• Construction Year to: 05.2001
• Fitting Position: Left
• for OE number: 58906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 1,690
• Number of pins: 4
• Weight [g]: 160
• Gross Weight [g]: 193
• Name: DN DOX-2035
• Manufacturer: DENSO