• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-003
• Manufacturer: NTY

• Oxygen Sensor: Regulating Probe
• Number of circuits: 4
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: 4B-X-067 800
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe
• Length [mm]: 355
• Number of pins: 4
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: APZ
• Vehicle Identification Number (VIN) from: 4B-X-067 801
• Oxygen Sensor: Diagnostic Probe
• Number of circuits: 4
• Manufacturer: JP GROUP
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Probe, Heated
• Vehicle Identification Number (VIN) from: 4B-X-067801
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AJG, APZ
• Construction Year from: 06.1997, 11.1998
• Construction Year to: 01.1999, 12.1998
• Oxygen Sensor: Regulating Probe, Oxygen Sensor
• Block Separation:
• Vehicle Identification Number (VIN) to: 4B..X..067801
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 4B-X-067800
• Number of pins: 4
• Oxygen Sensor: Heated
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Oxygen Sensor: Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV121
• Manufacturer: ESEN SKV

• Engine Code: AJG, APZ
• Construction Year from: 06.1997, 11.1998
• Construction Year to: 01.1999, 12.1998
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Vehicle Identification Number (VIN) to: 4B..X..067 801
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Engine Code: APZ
• Construction Year from: 12.1998
• Construction Year to: 05.2000
• Oxygen Sensor: Regulating Probe, Heated
• Vehicle Identification Number (VIN) from: 4B..X..068801
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Name: Lambda andur
• Manufacturer: MAX

• Length [mm]: 520
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 3.5
• Cable Length [mm]: 520
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: APZ
• Construction Year from: 12.1998
• Construction Year to: 05.2000
• Oxygen Sensor: Regulating Probe, Heated
• Vehicle Identification Number (VIN) from: 4B..X..068801
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

• Construction Year from: 11.1998
• Construction Year to: 12.1998, 01.1999
• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Vehicle Identification Number (VIN) to: 4B-X-067 801
• Engine Code: APZ, AJG
• Block Separation:
• Cable Length [mm]: 620
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)"

• Engine Code: AJG
• Construction Year to: 07.1998
• Fitting Position: Left
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0114
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Finger probe, Oxygen Sensor Additional information: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Probe
• Construction Year from: 12.1998
• Construction Year to: 05.2000
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV100

• Oxygen Sensor: Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Construction Year from: 01.1999
• Construction Year to: 05.2001
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 885
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.19
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV599
• Manufacturer: ESEN SKV

• Construction Year from: 05.1997
• Construction Year to: 12.1998
• Vehicle Identification Number (VIN) to: X-067 800
• Exhaust System: Duplex (1 le./1 ri.)
• Oxygen Sensor: Regulating Probe
• Length [mm]: 575
• Number of connectors: 4
• Manufacturer: VERNET

• Engine Code: AJG, APZ
• Construction Year from: 06.1997, 11.1998
• Construction Year to: 01.1999, 12.1998
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Vehicle Identification Number (VIN) to: 4B..X..067 801
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 12.1998
• Construction Year to: 01.1999, 05.2001
• Engine Code: AJG, APZ
• Vehicle Identification Number (VIN) from: X-067 801
• Fitting Position: Left, Right, before catalytic converter
• Block Separation:
• for OE number: 078 906 265 M
• Conductor Number: 4
• Connector Shape: D Shape
• Thread Size: M18 x 1,5
• Cable Length [mm]: 670
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Number of circuits: 4
• Weight [kg]: 0.121
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 1,690
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 1,690
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Construction Year from: 01.1999
• Construction Year to: 05.2001
• Oxygen Sensor: Regulating Probe
• Voltage [V]: 12
• Length [mm]: 630
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV616
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) to: 4B-X-067 800
• Oxygen Sensor: Finger probe
• Thread Size: M18 x 1,5
• Cable Length [mm]: 570
• Number of pins: 4
• Fitting Position: before catalytic converter
• Name: Lambda andur
• Manufacturer: MEY

• Exhaust System: for pre-catalytic converter
• Vehicle Identification Number (VIN) from: 4B-X-068801
• Cable Length [mm]: 620
• Oxygen Sensor: Planar probe, Heated
• Manufacturer: DELPHI
• Name: DE ES20160-12B1

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 1,700
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: APZ, AJG
• Construction Year from: 05.1997
• Construction Year to: 12.1998
• Vehicle Identification Number (VIN) to: 4BX067800
• Line insulation design: with silicone-coated woven-fibre insulation
• Supplementary Article/Info 2: without plug
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Fitting Position: after catalytic converter
• Manufacturer: VEMO GERMANY

Oxygen Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: APZ
• Construction Year from: 12.1998
• Construction Year to: 05.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 4B..X..068 801
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 04.1997
• Construction Year to: 01.1999
• Engine Code: AJG, APZ
• Vehicle Identification Number (VIN) to: 4B-X-067 800
• Quantity: 2
• Fitting Position: before catalytic converter
• Line insulation design: with silicone-coated woven-fibre insulation
• Oxygen Sensor: Planar probe, Heated, Thread pre-greased
• Supplementary Article/Info 2: without plug
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AJG
• Construction Year from: 08.1998
• Construction Year to: 01.1999
• Fitting Position: Left
• Vehicle Identification Number (VIN) from: X-067 801
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) to: 4B-X-067800
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 620
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year from: 12.1998
• Construction Year to: 04.2001
• Vehicle Identification Number (VIN) from: 4B-X-067801
• Oxygen Sensor: Heated
• Length [mm]: 670
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year from: 01.1999
• Fitting Position: Left, Right, Front, before catalytic converter
• Oxygen Sensor: Regulating Probe, Planar probe, Heated
• Vehicle Identification Number (VIN) from: 4BX067801
• Cable Length [mm]: 1,690
• Name: DE ES20164-12B1
• Manufacturer: DELPHI

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 1,700
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: AJG
• Construction Year from: 08.1998
• Construction Year to: 01.1999
• Fitting Position: Left
• Vehicle Identification Number (VIN) from: X-067 801
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 078906265M
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Weight [g]: 154
• Gross Weight [g]: 187
• Manufacturer: DENSO
• Name: DN DOX-2010
• Quality class: Q

Oxygen Sensor: Regulating Probe, Heated, Planar probe, Thread pre-greased, Oxygen Sensor Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"

• Construction Year from: 01.1999
• Construction Year to: 05.2001
• Oxygen Sensor: Regulating Probe, Thread pre-greased
• Vehicle Identification Number (VIN) from: 4BX067801
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,500
• Number of circuits: 4
• Weight [kg]: 0.219
• Manufacturer: VEMO GERMANY

Fitting Position: Left Front, Right Front, before catalytic converter General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AJG, APZ
• Construction Year from: 06.1997, 11.1998
• Construction Year to: 01.1999, 12.1998
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Vehicle Identification Number (VIN) to: 4B..X..067 801
• Number of circuits: 4
• Overall Length [mm]: 550
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Length [mm]: 1,700
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: FAE

• Engine Code: APZ
• Construction Year from: 12.1998
• Construction Year to: 05.2000
• Oxygen Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Vehicle Identification Number (VIN) from: 4B..X..068 801
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 1,700
• General Information: lambda probe; 4 wire
• Manufacturer: VIKA