• Vehicle Identification Number (VIN): [8D-T-155-001;], [8D-T-155001;]
• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 2
• Number of Teeth 1: 153
• Manufacturer: SNR
• Name: SN KD457.22
• Additional information: KD457.22 SNR
• Lisainfo: KD457.22 SNR

• Engine Code: ANB, AEB, APU
• Width [mm]: 25
• Number of Teeth: 153
• Weight [kg]: 1.027
• Units/Pulleys: incl. tensioner pulley, incl. deflection pulley
• for OE number: 058 198 119
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Trim Level: AEBANBAPUAR
• for OE number: 058198119
• Number of Teeth: 153
• Width [mm]: 25
• Length [mm]: 1,224
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 1.1
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Engine Code: AEB, ARK, ANB, APU
• Vehicle Identification Number (VIN) from: 4B-X-140 001
• Number of Teeth 1: 153
• Width 1 [mm]: 25
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Construction Year from: 04.1997
• Driven Units: Camshaft
• Engine Code: AEB, ANB, APU, ARK
• Supplementary Article/Info 2: without tensioner pulley damper
• Article number of the recommended special tool: GAT4740, GAT4844, GAT4741
• Observe technical data:
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Engine Code: ARK, APU, ANB, AEB
• Belt Width [mm]: 25
• Colour: black
• Number of Teeth: 153
• Belts: with rounded tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF
• Lisainfo: VKMA 01008 SKF
• Additional information: VKMA 01008 SKF

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 23
• Number of Teeth 1: 150
• Manufacturer: SNR
• Name: SN KD457.33

• Engine Code: AWT
• Tensioner Pulley Actuation: Hydraulic
• Alternatively:
• Number of Teeth 1: 150
• Width 1 [mm]: 23
• Supplementary Article/Info 2: without tensioner pulley damper
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 23
• Number of Teeth 1: 150
• Manufacturer: SNR
• Name: SN KD457.45

• Vehicle Identification Number (VIN) to: 8D_1_042385
• Driven Units: Camshaft
• Trim Level: AWT Ch. >8D_
• for OE number: 06B198119
• Number of Teeth: 150
• Width [mm]: 23
• Length [mm]: 1,200
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 1.1
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Vehicle Identification Number (VIN) from: 8D_1_042386
• Driven Units: Camshaft
• Trim Level: AWT Ch.8D_1_
• for OE number: 06B198119A
• Number of Teeth: 150
• Width [mm]: 23
• Length [mm]: 1,200
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 1.1
• Tensioner Pulley Actuation: Hydraulic
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Engine Code: AWT
• Width [mm]: 23
• Number of Teeth: 150
• Supplementary Article/Info 2: with screw
• Weight [kg]: 1.1
• Units/Pulleys: incl. tensioner pulley, incl. deflection pulley
• for OE number: 06B 198 119 A
• Observe service information:
• Name: SW 32 92 4755
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Engine Code: AEB, ARK, ANB, APU
• Vehicle Identification Number (VIN) from: 4B-X-140 001
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.21
• Number of Teeth: 153
• Width [mm]: 25
• Supplementary Article/Info 2: without tensioner pulley damper
• Alternatively:
• Pulleys contained: 2
• Tensioner Pulley Actuation: Hydraulic
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Construction Year from: 04.1997
• Driven Units: Camshaft
• Engine Code: AWT
• Vehicle Identification Number (VIN) to: 4B-1-040 000
• Supplementary Article/Info 2: without tensioner pulley damper
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Observe technical data:
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Engine Code: AWT
• Vehicle Identification Number (VIN) from: ******4B*2*000001
• Width [mm]: 23
• Number of Teeth: 150
• Weight [kg]: 1.311
• Units/Pulleys: incl. tensioner pulley
• Belt Material: HNBR (hydrogenated nitrile butadiene rubber)
• for OE number: 06B 109 119 F S4
• Observe service information:
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AEB, ARK, ANB, APU
• Construction Year from: 04.1997
• Construction Year to: 05.2001
• Number of Teeth: 153
• Length [mm]: 1,224
• Width [mm]: 25
• Tooth Pitch [mm]: 8
• Number of track rollers: 2
• Supplementary Article/Info 2: without tensioner element
• Manufacturer: BOSCH PASKI NAPÊDOWE

• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 150
• Width [mm]: 23
• Length [mm]: 1,200
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 1.5
• Manufacturer: DAYCO

• Engine Code: AWT
• Tensioner Pulley Actuation: Mechanical
• Number of Teeth 1: 150
• Width 1 [mm]: 23
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Engine Code: AWT
• Tensioner Pulley Actuation: Hydraulic
• Number of Teeth 1: 150
• Width 1 [mm]: 23
• Supplementary Article/Info 2: with tensioner pulley damper
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Driven Units: Camshaft
• Trim Level: AWT
• Number of Teeth: 150
• Width [mm]: 23
• Length [mm]: 1,200
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 1.4
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Engine Code: AWT
• Belt Width [mm]: 23
• Colour: black
• Number of Teeth: 150
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMA01170

• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 150
• Width [mm]: 23
• Length [mm]: 1,200
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 1.1
• Tensioner Pulley Actuation: Mechanical
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Driven Units: Camshaft
• Trim Level: AWT AWT
• Number of Teeth: 150
• Width [mm]: 23
• Length [mm]: 1,200
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 0.8
• Manufacturer: DAYCO

• Construction Year from: 04.1997
• Driven Units: Camshaft
• Engine Code: AWT
• Vehicle Identification Number (VIN) to: 4B-1-040 000
• Supplementary Article/Info 2: with tensioner pulley damper
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Observe technical data:
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Vehicle Identification Number (VIN) to: 4B-1-040 000
• Engine Code: AWT
• Width [mm]: 23.2
• Belt Width [mm]: 23
• Colour: black
• Supplementary Article/Info 2: with tensioner pulley damper
• Number of Teeth: 150
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMA01936

• Vehicle type: W/O DAMPER
• Number of belts: 1
• Weight [kg]: 2.18
• Name: AI WPK-937703
• Manufacturer: AIRTEX

• Driven Units: Camshaft
• Model Year from: 2002
• Engine Code: AWT
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 7
• Weight [kg]: 1.14
• Number of Teeth: 150
• Width [mm]: 23
• Supplementary Article/Info 2: without tensioner pulley damper
• Alternatively:
• Tensioner Pulley Actuation: Hydraulic
• Technical Information: Kit for reuse of the existing hydraulic damper
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Construction Year from: 06.2001
• Engine Code: AEB, ARK, ANB, APU, AWT
• Number of ribs: 150
• Length [mm]: 1,200
• Width [mm]: 23
• Number of Teeth: 150
• Manufacturer: MAGNETI MARELLI
• Name: MM MTKQ072P

• Vehicle Identification Number (VIN) from: 4B-1-040 001
• Engine Code: AWT
• Belt Width [mm]: 23
• Colour: black
• Supplementary Article/Info 2: with tensioner pulley damper
• Number of Teeth: 150
• Belts: with rounded tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF

• Engine Code: AEB, ARK, ANB, APU
• Construction Year from: 04.1997
• Construction Year to: 05.2001
• Number of Teeth: 153
• Length [mm]: 1,224
• Width [mm]: 25
• Tooth Pitch [mm]: 8
• Number of track rollers: 3
• Name: Hammasrihma komplekt
• Manufacturer: BOS

Supplementary Article/Info 2: with tensioner element, with tensioner pulley damper

• Engine Code: AWT
• Construction Year from: 05.2000
• Construction Year to: 05.2004
• Number of Teeth: 150
• Length [mm]: 1,200
• Width [mm]: 23
• Tooth Pitch [mm]: 8
• Number of track rollers: 2
• Manufacturer: BOSCH

Supplementary Article/Info 2: with tensioner element, with tensioner pulley damper

• Construction Year from: 04.1997
• Driven Units: Camshaft
• Engine Code: AWT
• Vehicle Identification Number (VIN) from: 4B-1-040 001
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Observe technical data:
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Engine Code: APU
• Supplementary Article/Supplementary Info: with water pump, with coolant
• Number of belts: 1
• Supplementary Article/Info 2: with fastening material
• Pulleys contained: 1
• Operating Mode: Mechanical
• Number of Teeth: 138
• Width [mm]: 23
• Weight [kg]: 6.128
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Driven Units: Camshaft
• Model Year from: 2002
• Engine Code: AWT
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.06
• Number of Teeth: 150
• Width [mm]: 23
• Alternatively:
• Tensioner Pulley Actuation: Mechanical
• Technical Information: Please note: Technical Info in the attachment
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 153
• Width [mm]: 25
• Length [mm]: 1,224
• Number of belts: 1
• Pulleys contained: 3
• Weight [kg]: 1.4
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: DAY

• Vehicle Identification Number (VIN) to: 4B-1-040 000
• Engine Code: AWT
• Water pump impeller material: Plastic
• Belt Width [mm]: 23
• Supplementary Article/Info 2: with tensioner pulley damper
• Number of Teeth: 150
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMC01936

• Engine Code: AWT
• Water pump impeller material: Plastic
• Belt Width [mm]: 23
• Number of Teeth: 150
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMC01170-1

• Number of belts: 1
• Width 1 [mm]: 25
• Number of track rollers: 3
• Number of Teeth 1: 153
• Manufacturer: SNR
• Name: SN KD457.55

• Engine Code: AEB, ARK, ANB, APU
• Number of Teeth 1: 153
• Width 1 [mm]: 25
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Vehicle Identification Number (VIN) from: 4B-1-040 001
• Engine Code: AWT
• Water pump impeller material: Plastic
• Belt Width [mm]: 23
• Supplementary Article/Info 2: with tensioner pulley damper, with studs
• Number of Teeth: 150
• Belts: with rounded tooth profile
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF

• Driven Units: Camshaft
• Trim Level: AWT AWT
• Number of Teeth: 150
• Width [mm]: 23
• Length [mm]: 1,200
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 2.4
• Manufacturer: DAYCO

• Driven Units: Camshaft
• Trim Level: KTBWP
• Number of Teeth: 150
• Width [mm]: 23
• Length [mm]: 1,200
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 2
• Tensioner Pulley Actuation: Mechanical
• Manufacturer: DAYCO
• Name: DA KTBWP9750

• Engine Code: ARK, ANB, APU, AEB
• Number of Teeth: 153
• Driven Units: Camshaft
• Width [mm]: 25
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with tensioner pulley damper
• Manufacturer: OPTIMAL ZAWIESZENIE

• Driven Units: Camshaft
• Model Year from: 2002
• Engine Code: AWT
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 150
• Weight [kg]: 1.853
• Width [mm]: 23
• Tensioner Pulley Actuation: Hydraulic
• Technical Information: Kit for reuse of the existing hydraulic damper
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

• Construction Year to: 06.2001
• Engine Code: AEB, ARK, ANB, APU, AWT
• Number of ribs: 150
• Length [mm]: 1,200
• Width [mm]: 23
• Number of Teeth: 150
• Manufacturer: MAGNETI MARELLI
• Name: MM MTKQ025P

• Construction Year from: 04.1997
• Driven Units: Camshaft
• Engine Code: AEB, ANB, APU, ARK
• Supplementary Article/Info 2: with tensioner pulley damper
• Article number of the recommended special tool: GAT4740, GAT4844, GAT4741
• Observe technical data:
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Construction Year to: 05.2001
• Engine Code: AWT
• Number of Teeth 1: 150
• Width 1 [mm]: 23
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 23
• Number of Teeth 1: 150
• Manufacturer: SNR /NTN-SNR/
• Name: SN KDP457.450

• Construction Year from: 06.2001
• Engine Code: AWT
• Number of Teeth 1: 150
• Width 1 [mm]: 23
• Supplementary Article/Supplementary Info: with water pump
• Observe service information:
• Follow installation instructions:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Driven Units: Camshaft
• Model Year to: 2001
• Engine Code: AWT
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.42
• Number of Teeth: 150
• Width [mm]: 23
• Supplementary Article/Info 2: with tensioner pulley damper
• Alternatively:
• Pulleys contained: 2
• Technical Information: Please note: Technical Info in the attachment
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Construction Year from: 04.1997
• Driven Units: Camshaft
• Engine Code: AWT
• Vehicle Identification Number (VIN) from: 4B-1-040 001
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Construction Year from: 04.1997
• Driven Units: Camshaft
• Engine Code: AWT
• Vehicle Identification Number (VIN) to: 4B-1-040 000
• Supplementary Article/Info 2: with tensioner pulley damper
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Engine Code: APU, ARK, AEB, ANB
• Belt Width [mm]: 25
• Colour: black
• Number of Teeth: 153
• Belts: with rounded tooth profile
• Manufacturer: SKF
• Name: SK VKMA01908

• Engine Code: ARK, AEB, APU, ANB
• Vehicle Identification Number (VIN) from: 4B-X-085 001
• Width [mm]: 25
• Number of Teeth: 153
• Belts: with rounded tooth profile
• Weight [kg]: 1.391
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Trim Level: KTB
• Number of Teeth: 153
• Width [mm]: 25
• Length [mm]: 1,224
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 1.3
• Manufacturer: DAYCO
• Name: DA KTB463

• Driven Units: Camshaft
• Model Year from: 2002
• Engine Code: AWT
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 150
• Weight [kg]: 1.725
• Width [mm]: 23
• Tensioner Pulley Actuation: Mechanical
• Technical Information: Please note: Technical Info in the attachment
• Manufacturer: CONTITECH

• Driven Units: Camshaft
• Engine Code: AEB, ARK, ANB, APU
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.46
• Number of Teeth: 153
• Width [mm]: 25
• Supplementary Article/Info 2: with tensioner pulley damper
• Alternatively:
• Pulleys contained: 2
• Technical Information: Please note: Technical Info in the attachment
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Driven Units: Camshaft
• Engine Code: AEB, ARK, ANB, APU
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 9.5
• Weight [kg]: 1.298
• Number of Teeth: 153
• Width [mm]: 25
• Supplementary Article/Info 2: with tensioner pulley damper
• Pulleys contained: 1
• Technical Information: Please note: Technical Info in the attachment
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON