• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with integrated wheel bearing
• Rim Hole Number: 5
• Manufacturer: JP GROUP
• Lisainfo: Wheel hub with bearing, rear
• Additional information: Wheel hub with bearing, rear

• Fitting Position: Rear Axle
• Construction Year to: 04.1997
• Vehicle Identification Number (VIN) to: 4A-V-063389
• Width [mm]: 14.7
• Inner Diameter [mm]: 19.1
• Outer Diameter [mm]: 45.2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Fabrication Number: KLP-AU-004
• Rim Size [inch]: 16.0
• Name: NTY KLP-AU-004
• Manufacturer: NTY

Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle Transmission Type: 5-Speed Manual Transmission, 5-Speed Automatic Transmission, Manual Transmission

• Construction Year from: 01.1998
• Vehicle Identification Number (VIN) from: F 4B-Y-000 001
• Vehicle Identification Number (VIN) to: F 4B-X-200 000
• Fitting Position: Rear Axle
• for OE number: 4B0 598 625 B
• Weight [kg]: 0.845
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle, Rear Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Name: Rattalaagrikomplekt
• Manufacturer: MAX

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 82
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Manufacturer: GSP

• Fitting Position: Front Axle
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Net weight [kg]: 1.04
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 82
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Inner Diameter [mm]: 43
• Weight [kg]: 0.768
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 4B-2-031 500
• Width [mm]: 37
• Outer Diameter [mm]: 82
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 43
• Supplementary Article/Info 2: with screw
• Inner Diameter 2 [mm]: 45
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Transmission Type: 5-Speed Manual Transmission
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Outer Diameter [mm]: 75
• Inner Diameter 1 [mm]: 41
• Inner Diameter 2 [mm]: 39
• Width [mm]: 37
• Supplementary Article/Info 2: with nut, with screw
• Full Set:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter 1 [mm]: 82
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Front Axle both sides, Front Axle, Rear Axle
• Engine Code: AFN
• Guarantee: 4 years guarantee
• Weight [kg]: 1.87
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV438

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 45
• Manufacturer: OPTIMAL

• Engine Code: AVG
• Fitting Position: Front Axle both sides
• Weight [kg]: 0.765
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Supplementary Article/Info 2: without wheel hub
• Packaging length [cm]: 8.2
• Packaging width [cm]: 8.2
• Packaging height [cm]: 3.7
• Manufacturer: FEBEST

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Kaal (kg): 0,84
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: METALCAUCHO

• Outer Diameter [mm]: 82
• Quantity Unit: Set
• Inner Diameter [mm]: 43
• Fitting Position: Front Axle
• Weight [kg]: 0.694
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• for OE number: 4B0498625A
• Inner Diameter [mm]: 43
• Width 1 [mm]: 37
• Number of mounting bores: 1
• Name: DA KWD1060
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 43
• Width [mm]: 40
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Piirangutega toode/piirangu info 2: ilma flantsita
• Laius (mm): 40,3
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Lisainfo: W413307 DKM
• Additional information: W413307 DKM

• Fitting Position: Front Axle
• Alternative Repair Kit: 100 498 0037
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.76
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV436

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Thread Size: M16x1,5x77
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Weight [kg]: 0.84
• Outer Diameter 1 [mm]: 82
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Vehicle Identification Number (VIN) to: ******4B*2*031500
• Width [mm]: 37
• Inner Diameter [mm]: 43, 45
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.202
• Supplementary Article/Supplementary Info: with nuts, with motor shaft screw
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 43
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Vehicle Identification Number (VIN) to: ******4B*2*031500
• Width [mm]: 37
• Inner Diameter [mm]: 43, 45
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.202
• Supplementary Article/Supplementary Info: with motor shaft screw, with nuts
• Name: SW 30 10 0725
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Laius (mm): 40,3
• Siseläbimõõt [mm]: 43
• Quality class: PJ
• Name: Wheel hub

• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laius (mm): 37
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Right, Left, Front Axle
• Manufacturer: SNR /NTN-SNR/
• Name: SN R157.24

• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Supplementary Article/Info 2: with wheel hub
• Fabrication Number: KLT-AU-002
• Manufacturer: NTY

Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right, Front Axle

• Fitting Position: Front Axle
• Required quantity: 2
• Weight [kg]: 1.056
• Packaging length [cm]: 10.9
• Packaging width [cm]: 8.4
• Packaging height [cm]: 10.9
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Width [mm]: 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Ääriku läbimõõt [mm]: 131
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Veljeaukude hulk: 5
• Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 131
• Braking/Drive Dynamics: for vehicles with ABS
• Guarantee: 4 years guarantee
• Weight [kg]: 3.3
• Number of Holes: 5
• Bolt Hole Circle Ø 1 [mm]: 108
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV009

• Fitting Position: Rear Axle Left, Rear Axle Right
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 131
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 131
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX
• Lisainfo: 2444/MG
• Additional information: 2444/MG

• Vehicle Identification Number (VIN) to: ******4B*2*031500
• Fitting Position: Front Axle
• Rim Size [inch]: 17.0, 18.0
• Block Separation:
• Vehicle Identification Number (VIN) from: ******4B*2*031500
• Width [mm]: 40
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 85
• Inner Diameter 1 [mm]: 43
• Weight [kg]: 1.57
• Inner Diameter 2 [mm]: 45
• Supplementary Article/Supplementary Info: with motor shaft screw
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piirangutega toode/piirangu info 2: koos kruvidega
• Välisläbimõõt [mm]: 82
• Siseläbimõõt [mm]: 45
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle
• Width [mm]: 91
• Outer Diameter [mm]: 130
• Distance of mounting bores [mm]: 112
• Supplementary Article/Info 2: with ABS sensor ring
• Thread Size: M14x1,5
• Rim Hole Number: 5
• Number of Teeth, ABS ring: 45
• Net weight [kg]: 3.16
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: NK

• Installatsiooni pool: Tagasild
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 131
• Laius 2 (mm): 70,2
• Välisläbimõõt 1 [mm]: 48
• Välisläbimõõt 2 [mm]: 68
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Outer Diameter [mm]: 130
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Weight [kg]: 1.613
• Packaging length [cm]: 13.7
• Packaging width [cm]: 13.1
• Packaging height [cm]: 7.3
• Supplementary Article/Info 2: without flange
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Width [mm]: 40.2
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Outer Diameter 2 [mm]: 131
• Number of mounting bores: 4
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle both sides
• Quantity per axle: 2
• Number of flange connections: 5
• Rim Hole Number: 5
• Supplementary Article/Info 2: Wheel Bearing integrated into wheel hub
• Outer Diameter [mm]: 131
• Bolt Hole Circle Ø [mm]: 112
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 40.25
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Supplementary Article/Info 2: without flange
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: REAR LR+RE
• for OE number: 8E0501611J
• Width 1 [mm]: 91
• Supplementary Article/Info 2: with integrated ABS sensor
• Number of mounting bores: 1
• Name: DA KWD1054
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• Veljeaukude hulk: 5
• Ääriku läbimõõt [mm]: 131
• Piirangutega toode/piirangu info 2: koos ABS-andurirõngaga
• Quality class: PJ
• Name: Wheel hub

• for OE number: 8E0 501 611
• Fitting Position: Rear Axle both sides
• Manufacturer: TRUCKTEC

• Quantity: 2
• Installatsiooni pool: Tagasild
• Aukude arv: 5
• Kaal (kg): 3,1
• Piirangutega toode/piirangu info 2: Rattalaager on integreeritud rattarummu
• vajaminev tükihulk: 2
• Ava Ø (mm): 108
• Laius (mm): 130
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 131, 56
• Laagriteostus: kuullaager
• Üldine informatsioon: wheel hub with bearing; rear
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Vehicle Identification Number (VIN) from: 4B-W-000001
• Width [mm]: 91
• Outer Diameter [mm]: 130
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle Left, Rear Axle Right
• Version: One
• Thread Size: M14X1,5
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 131
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Brake Type: Disc Brake
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter [mm]: 131
• Outer Diameter 2 [mm]: 68
• Outer Diameter 1 [mm]: 48
• Width 2 [mm]: 70.2
• Inner Diameter [mm]: 39
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with integrated wheel bearing
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 130
• Bolt Hole Circle Ø [mm]: 112
• Rim Hole Number: 5
• Bearing Type: Ball Bearing
• Name: RATTARUMM
• Manufacturer: MEY
• Lisainfo: 1007520001
• Additional information: 1007520001

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Right, Left, Rear Axle
• No. of holes 1: 5
• No. of holes 2: 5
• Supplementary Article/Info 2: with rubber mount
• Inner Diameter 1 [mm]: 39
• Outer Diameter 1 [mm]: 130
• Width 1 [mm]: 127
• Manufacturer: SNR

• Fitting Position: Rear Axle
• Required quantity: 2
• Weight [kg]: 3.2
• Packaging length [cm]: 15.3
• Packaging width [cm]: 15.6
• Packaging height [cm]: 17.6
• Supplementary Article/Info 2: with ABS sensor ring
• Outer Diameter [mm]: 131
• Rim Hole Number: 5
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Required quantity: 2
• Flange Diameter [mm]: 131
• Rim Hole Number: 5
• Supplementary Article/Info 2: with ABS sensor ring
• Manufacturer: SKF
• Name: SK VKBA3489