• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Length [mm]: 89
• Diameter 1 [mm]: 88
• ABS Ring Ø [mm]: 81
• Outer Diameter 1 [mm]: 53
• Outer Diameter 2 [mm]: 89
• Thread Size: M14x1,5
• Manufacturer: BGA

• Transmission Type: Manual Transmission
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Wheel Side, Front Axle
• Bellows Material: Rubber
• Thread Size: M14 x 1,5
• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 33
• Seal Diameter [mm]: 53
• Internal Toothing wheel side: 30
• Outer Diameter [mm]: 87.9
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX
• Lisainfo: 25-1239MG
• Additional information: 25-1239MG

• Fitting Position: Front Axle Left, Front Axle Right
• Fabrication Number: NPZ-VW-008
• Manufacturer: NTY

Transmission Type: 5-Speed Manual Transmission, Manual Transmission, Automatic Transmission, 4-Speed Automatic Transmission

• Construction Year from: 12.1997
• Construction Year to: 04.2001
• Fitting Position: Wheel Side
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Length [mm]: 90
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Construction Year from: 12.1997
• Construction Year to: 04.2001
• Transmission Type: Manual Transmission
• Fitting Position: Wheel Side, Front Axle
• Seal Diameter [mm]: 53
• Outer Diameter [mm]: 88
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Number of Teeth, ABS ring: 45
• Manufacturer: LPR

• Fitting Position: Wheel Side
• Number of Teeth, ABS ring: 45
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Number of Teeth, ABS ring: 45
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Length [mm]: 92
• Fitting Position: Wheel Side
• Specification: Groove type: OUTER
• Manufacturer: JAPKO

• Fitting Position: Front Axle, transmission sided
• Transmission Type: Manual Transmission
• for PR number: T8B, T5Z, T6W, T6V
• Joint Type: CV Joint
• Outer Diameter [mm]: 108
• Internal Toothing differential side, conn. to conn. shaft: 28
• Length [mm]: 32
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX

• Fitting Position: Front Axle, Wheel Side
• Model Year to: 2001
• Joint Type: CV Joint
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Outer Diameter [mm]: 87.9
• Number of Teeth, ABS ring: 45
• Bellows Material: Thermoplast
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Manufacturer: BGA

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Construction Year from: 12.1997
• Construction Year to: 04.2001
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle, Wheel Side
• Joint Type: CV Joint
• Internal Toothing wheel side: 30
• External Toothing wheel side: 33
• Number of Teeth, ABS ring: 45
• Lisainfo: CV joint, front, outer
• Additional information: CV joint, front, outer

• Fitting Position: Front Axle, Wheel Side
• Transmission Type: Manual Transmission, Automatic Transmission
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 33
• Seal Diameter [mm]: 59.4
• Outer Diameter [mm]: 87.9
• Number of Teeth, ABS ring: 45
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Thread Size: M14x1.5
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 87.9
• Bellows Material: Rubber
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEP

• Fitting Position: Front Axle, transmission sided
• Transmission Type: Manual Transmission
• for PR number: T8B, T5Z, T6W, T6V
• Joint Type: CV Joint
• Outer Diameter [mm]: 108
• Bellows Material: Polychloroprene (Neoprene)
• Internal Toothing differential side, conn. to conn. shaft: 28
• Length [mm]: 32
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fitting Position: Front Axle, Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59.5
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Bellows Material: NBR (nitrile butadiene rubber)
• SVHC: No SVHC present!
• Name: Liigendlaager, veovoll
• Manufacturer: FAG

• Fitting Position: Front Axle, transmission sided
• Transmission Type: Manual Transmission
• Internal Toothing differential side, conn. to conn. shaft: 28
• Joint Type: CV Joint
• Manufacturer: JP GROUP
• Lisainfo: CV joint kit, front, inner
• Additional information: CV joint kit, front, inner

• Fitting Position: transmission sided
• Transmission Type: Manual Transmission
• Internal Toothing wheel side: 28
• General Information: c.v.joint; inner; MT; Inner tooth28mm
• Manufacturer: VIKA

• Transmission Type: 5-Speed Manual Transmission
• Fitting Position: Front Axle
• External Toothing differential side: 28
• Specification: BELL PIN LENGTH - 32
• Manufacturer: MAGNETI MARELLI

• Fitting Position: Wheel Side
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Joint Type: CV Joint
• Drive Shaft: with ABS ring
• Length [mm]: 92
• Outer Diameter [mm]: 89
• Number of Teeth, ABS ring: 45
• Surface: Powder coated
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY
• Lisainfo: 1004980069
• Additional information: 1004980069

• Transmission Type: 5-Speed Manual Transmission
• Fitting Position: Front Axle
• Length [mm]: 62
• External Toothing wheel side: 33
• External Toothing differential side: 30
• Seal Diameter [mm]: 53
• Specification: BELL PIN LENGTH - 30
• Name: MM TOJ0025
• Manufacturer: MAGNETI MARELLI

• Construction Year from: 12.1997
• Construction Year to: 04.2001
• Transmission Type: Manual Transmission
• Fitting Position: transmission sided, Front Axle
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Manufacturer: LPR

• Fitting Position: Front Axle Right, Front Axle Left
• Internal Toothing wheel side: 34
• Fabrication Number: NPW-VW-006

• Construction Year from: 12.1997
• Construction Year to: 04.2001
• Internal Toothing differential side, conn. to conn. shaft: 28
• Joint Diameter [mm]: 108
• Length [mm]: 32
• Manufacturer: DENCKERMANN ZAWIESZENIE

Fitting Position: Front Axle Left, Front Axle Right, transmission sided

• Fitting Position: Front Axle
• Internal Toothing wheel side: 28
• Outer Diameter [mm]: 108
• Bellows Material: Rubber
• Manufacturer: METELLI

• Transmission Type: Manual Transmission
• Fitting Position: transmission sided
• Joint Type: CV Joint
• Drive Shaft: without ABS ring
• Length [mm]: 32
• Internal Toothing differential side, conn. to conn. shaft: 28
• Outer Diameter [mm]: 108
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MEY

• Transmission Type: Automatic Transmission, Manual Transmission
• Block Separation:
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Lubrication: with grease lubrication
• Joint Diameter [mm]: 87.9
• Joint Type: CV Joint
• Supplementary Article/Info 2: with bellow, with ABS sensor ring
• Supplementary Article/Supplementary Info: with attachment material
• Quantity per axle: 2
• for OE number: 8D0 498 099B
• Full Set:
• New Part:
• Used part return not required:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Transmission Type: 5-Speed Manual Transmission
• Internal Toothing differential side, conn. to transmission: 28
• Length from [mm]: 32
• Quality class: PJ
• Name: Inner CV-joint

Fitting Position: transmission sided, Front Axle Right, Front Axle Left

• Fitting Position: Wheel Side, Front Axle
• Engine Code: AJP, AQE, ARH
• Thread Size: M14x1,5
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 90
• Joint Type: CV Joint
• Name: Outer CV-joint
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle
• Internal Toothing wheel side: 30
• External Toothing wheel side: 33
• Length [mm]: 89.5
• General Information: c.v.joint; outer; Inner tooth30mm
• Manufacturer: VIKA

• Transmission Code: MT
• Fitting Position: Front Axle
• Internal Toothing differential side, conn. to transmission: 34
• Length [mm]: 85
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: MAX
• Lisainfo: 26-5502MG
• Additional information: 26-5502MG

• Fitting Position: outer
• Supplementary Article/Info 2: with rubber mount
• Seal Diameter [mm]: 53
• External Toothing wheel side: 33
• Thread Size: M14x1,5
• Internal Toothing wheel side: 30
• Number of pins: 45
• Version: 6 balls
• Length 2 [mm]: 92
• Name: SN OJK54.002
• Manufacturer: SNR

• Vehicle Identification Number (VIN): [3B-WE394609;], [4B-X-020000;]
• Fitting Position: outer
• Supplementary Article/Info 2: with rubber mount
• Seal Diameter [mm]: 59.5
• Thread Size: M16x1,5
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Number of pins: 45
• Version: 6 balls
• Length 2 [mm]: 97.5
• Manufacturer: SNR /NTN-SNR/
• Name: SN OJK54.001

• Model Year from: 1998
• Model Year to: 2001
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.321
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 90
• Supplementary Article/Info 2: with ABS sensor ring
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Model Year from: 1998
• Model Year to: 2001
• Fitting Position: Front Axle, Wheel Side
• Weight [kg]: 2.681
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Seal Diameter [mm]: 59
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 98
• Supplementary Article/Info 2: with ABS sensor ring
• Packaging length [cm]: 20
• Packaging width [cm]: 10.5
• Packaging height [cm]: 10.5
• Manufacturer: FEBEST

• Engine Code: AJP, ARH, AQE
• Fitting Position: Wheel Side, Front Axle
• Thread Size: M14x1,5
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Seal Diameter [mm]: 53
• Number of Teeth, ABS ring: 45
• Outer Diameter [mm]: 90
• Joint Type: CV Joint
• Machined: with groove in inner part (inside)
• Technical Information: Pre-greased joint
• Name: LIIGENDLAAGER, VEOVOLL
• Manufacturer: SKF

• Engine Code: ARH, AQE, AJP
• Transmission Type: Manual Transmission, Automatic Transmission
• Block Separation:
• Vehicle Identification Number (VIN) from: 4B-X-020 000
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Supplementary Article/Supplementary Info: with grease
• Fitting Position: Front Axle, Wheel Side
• Outer Diameter 1 [mm]: 98
• Outer Diameter 2 [mm]: 59.5
• Weight [kg]: 2.95
• Bellows Material: Rubber
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 12.1997
• Construction Year to: 04.2001
• Fitting Position: Front Axle Left, Front Axle Right, Wheel Side
• Joint Type: CV Joint
• External Toothing wheel side: 33
• Internal Toothing wheel side: 30
• Number of Teeth, ABS ring: 45
• ABS Ring Ø [mm]: 81
• Seal Diameter [mm]: 53
• Machined: without groove in internal component
• Joint Diameter [mm]: 88
• Length [mm]: 91
• Thread Size: M14x1.5x73
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with screw
• Name: Liigendlaager, veovoll
• Manufacturer: GKN

Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!

• Engine Code: ARH, AJP, AQE
• Fitting Position: transmission sided, Front Axle
• Length [mm]: 32
• Bore Ø [mm]: 10.5
• Internal Toothing differential side, conn. to conn. shaft: 28
• Number of bores: 6
• Outer Diameter [mm]: 108
• Bolt Hole Circle Ø [mm]: 94
• Joint Type: Disc Joint
• Manufacturer: SKF
• Name: SK VKJA8005

• Fitting Position: Front Axle, Wheel Side
• External Toothing wheel side: 38
• Internal Toothing wheel side: 27
• Outer Diameter [mm]: 98
• Number of Teeth, ABS ring: 45
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Model Year from: 1998
• Model Year to: 2001
• Fitting Position: Front Axle, transmission sided
• Weight [kg]: 2.22
• Internal Toothing differential side, conn. to transmission: 34
• Seal Diameter [mm]: 100
• Outer Diameter [mm]: 85
• Joint Type: Tripod Joint
• Packaging length [cm]: 16.5
• Packaging width [cm]: 10
• Packaging height [cm]: 10
• Manufacturer: FEBEST

• Construction Year from: 12.1997
• Construction Year to: 04.2001
• Joint Type: Disc Joint
• Internal Toothing differential side, conn. to conn. shaft: 28
• Machined: without groove in internal component
• Joint Diameter [mm]: 108
• Length [mm]: 32
• Thread Size: M10x1.5x48
• Bore Ø [mm]: 10.2
• Number of bores: 6
• Bolt Hole Circle Ø [mm]: 94
• Bellows Material: NBR (nitrile butadiene rubber)
• New Part:
• Supplementary Article/Info 2: with bolts/screws
• Manufacturer: GKN LOBRO

Fitting Position: transmission sided, Front Axle Left, Front Axle Right Technical Information: Please observe the specific technical specifications for the joint. Here, a bending angle greater than 50° is required!