Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Base body material: Steel
- Surface: Rubberized
- Outer Diameter [mm]: 47
- Colour: black
- for OE number: 078103113E
- Manufacturer: DELLO AUTOMEGA
- Required quantity: 4
- Fitting Position: frontal sided
- Engine Code: AJK
-
Material: FPM
(fluoride rubber) - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: A SL
- Swirl Type: Alternating Twist
- Manufacturer: REINZ
-
Name: RN 81-
19299- 10 -
Lisainfo: 81-
19299- 10 -
Additional information: 81-
19299- 10
- Required quantity: 4
-
Fitting Position: frontal sided,
transmission sided - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber)/ ACM (polyacrylate rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.156
- Manufacturer: ELRING
- Lisainfo: 325.155 ELR
- Additional information: 325.155 ELR
-
Jämedus/Tugevus (mm): 14,
8 -
Kaal (kg): 0,
02 - Üldine informatsioon: end cap
- Manufacturer: VIKA
- Required quantity: 4
-
Fitting Position: frontal sided,
transmission sided - Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
- Swirl Type: Alternating Twist
-
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Alternative Repair Kit: 325.155
- Manufacturer: ELRING
- Fitting Position: Front
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
-
Fabrication Number: NUP-
AU- 003 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Manufacturer: DR.MOTOR
Lühiinformatsioon: Always compare old and new part (in particular OE No.)
- Required quantity: 2
- Width [mm]: 16
- Length [mm]: 47
- Manufacturer: AJUSA
- Required quantity: 2
- Quantity per packing unit: 10
- Manufacturer: ELRING
- Installatsiooni pool: stirnseitig
- Kõrgus (mm): 10
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 47
- Pöördeliik: Paremkeere
- Name: DRM 02227
- Manufacturer: DR.MOTOR AUTOMOTIVE
- Fitting Position: frontal sided
- Required quantity: 3
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Right-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
- Lisainfo: 129.780 ELR
- Additional information: 129.780 ELR
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Fitting Position: Axle beam
- General Information: shaft oil seal
- Manufacturer: BORSEHUNG
- Fitting Position: transmission sided
- Required quantity: 1
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW
-
Swirl Type: Left-
hand Twist - Dust Cover: with dust lip
- Observe mounting information:
- Manufacturer: ELRING
Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber) Installation Information: Mounting dry and without any additional oil and grease
- Thickness [mm]: 14.8
- Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: transmission sided
- Required quantity: 1
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Height [mm]: 10
- Radial Shaft Seal Design: ASW OF
-
Swirl Type: Left-
hand Twist -
Material: FPM
(fluoride rubber) - Dust Cover: with dust lip
- Manufacturer: ELRING
-
Vehicle Identification Number (VIN) from: 4B-
Y- 036 001 - for OE number: 03G 105 021 C
- Thickness [mm]: 10
- Inner Diameter [mm]: 35
- Fitting Position: frontal sided
- Outer Diameter [mm]: 48
- Weight [kg]: 0.031
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Right,
to cylinder 1, to cylinder 2, to cylinder 3 - Manufacturer: JP GROUP
- Lisainfo: Camshaft Adjuster
- Additional information: Camshaft Adjuster
-
Fitting Position: Left,
to cylinder 4, to cylinder 5, to cylinder 6 - Lisainfo: Camshaft Adjuster
- Additional information: Camshaft Adjuster
- Construction Year to: 08.2000
-
Fitting Position: Cylinder Head,
Inlet - Number of pins: 2
- Pin Shape: Flat
- Plug Type: Male
- Material: Metal
- Length [mm]: 165
- Width [mm]: 125
- Height [mm]: 102
- Manufacturer: GATES
- Fitting Position: Right
- Manufacturer: MEAT&DORIA
- Piirangutega toode/piirangu info: koos tihenditega
- Ühenduste arv: 2
- Pistikukatte kuju: ristkülik
- Manufacturer: ERA
- Construction Year to: 08.2000
-
Fitting Position: Cylinder Head,
Outlet - Number of pins: 2
- Pin Shape: Flat
- Plug Type: Male
- Material: Metal
- Length [mm]: 165
- Width [mm]: 112
- Height [mm]: 102
- Manufacturer: GATES
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks