• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Kõrgus (mm): 37
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Vehicle Identification Number (VIN) from: F 4B-Y-000 001
• Vehicle Identification Number (VIN) to: F 4B-X-200 000
• Installatsiooni pool: Tagasild
• OE-numbri jaoks: 4B0 598 625 B
• Kaal (kg): 0,845
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Seerianumber: KLP-AU-004
• Veljesuurus (toll): 16,0
• Manufacturer: NTY
• Name: NTY KLP-AU-004

Installatsiooni pool: Tagasild, esisild vasakul, esisild paremal, Esisild Käigukasti liik: Käigukast 5 käiku, Automaatkast, 5 käiku, Käigukast

• Fitting Position: Rear Axle Left, Rear Axle Right
• Versioon: Two
• Laius 1 (mm): 37
• Välisläbimõõt 1 [mm]: 75
• Siseläbimõõt 1 [mm]: 41
• Siseläbimõõt 2 (mm): 39
• Manufacturer: GSP

• Fitting Position: Front Axle
• Construction Year to: 05.2001
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Construction Year to: 05.2001
• Installatsiooni pool: Tagasild
• Laius (mm): 37
• Välisläbimõõt [mm]: 75
• Manufacturer: KAMOKA

• Laius 1 (mm): 37
• Välisläbimõõt 1 [mm]: 82
• Siseläbimõõt 1 [mm]: 43
• Siseläbimõõt 2 (mm): 45
• Manufacturer: GSP

Fitting Position: Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right

• Fitting Position: Rear Axle
• Construction Year to: 05.2001
• Track Width, rear [mm]: 1,570
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Siseläbimõõt 2 (mm): 41
• Manufacturer: OPTIMAL

• Construction Year to: 05.2001
• Installatsiooni pool: Esisild
• Laius (mm): 37
• Välisläbimõõt [mm]: 82
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Installatsiooni pool: Esisild
• Välisläbimõõt [mm]: 82
• Kõrgus (mm): 37
• Siseläbimõõt [mm]: 43
• Kaal (kg): 0,768
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Laius (mm): 37
• Välisläbimõõt [mm]: 82
• Installatsiooni pool: esisild vasakul, esisild paremal
• Siseläbimõõt 1 [mm]: 43
• Piirangutega toode/piirangu info 2: koos kruviga
• Siseläbimõõt 2 (mm): 45
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Vehicle Identification Number (VIN) to: 4B-2-031500
• Construction Year to: 09.2001
• Fitting Position: Tandem-axle Assembly
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt 1 [mm]: 82
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle both sides
• Versioon: One
• Laius 1 (mm): 37
• Välisläbimõõt 1 [mm]: 75
• Siseläbimõõt 1 [mm]: 41
• Siseläbimõõt 2 (mm): 39
• Manufacturer: GSP

• Fitting Position: Front Axle both sides
• Engine Code: AJK
• Construction Year from: 09.2001
• Installatsiooni pool: Esisild, Tagasild
• Garantii: 4 aastat garantii
• Kaal (kg): 1,87
• Ava Ø 1 (mm): 112
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV438

• Fitting Position: Rear Axle
• Construction Year from: 06.2001
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle, Front Axle
• Construction Year to: 05.2001, 09.2001
• Track Width, rear [mm]: 1,558, 1,570
• Block Separation:
• Construction Year from: 06.2001, 05.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Rim Size [inch]: 16.0
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Siseläbimõõt 1 [mm]: 45
• Manufacturer: OPTIMAL

• Installatsiooni pool: Esisild
• Garantii: 4 aastat garantii
• Kaal (kg): 1,86
• Ava Ø 1 (mm): 112
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV ESEN

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Kaal (kg): 0,84
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: METALCAUCHO

• Construction Year to: 05.2001
• Välisläbimõõt [mm]: 82
• Hulgaühik: Komplekt
• Siseläbimõõt [mm]: 43
• Installatsiooni pool: Esisild
• Kaal (kg): 0,694
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Välisläbimõõt [mm]: 82
• Installatsiooni pool: Esisild, esisild vasakul, esisild paremal
• Seerianumber: KLP-AU-006
• Veljesuurus (toll): 17,0, 18,0
• Manufacturer: NTY
• Name: NTY KLP-AU-006

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• for OE number: 4D0407625E
• Siseläbimõõt [mm]: 43
• Laius 1 (mm): 37
• Kinnitusaukude hulk: 1
• Name: DA KWD1060
• Manufacturer: DAYCO

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Piirangutega toode/piirangu info 2: ilma flantsita
• Laius (mm): 40,3
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Lisainfo: W413307 DKM
• Additional information: W413307 DKM

• Model Year from: 1998
• Model Year to: 2001
• Installatsiooni pool: Tagasild
• Kaal (kg): 0,965
• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• pakendi pikkus [cm]: 11,2
• pakendi laius [cm]: 8,6
• pakendi kõrgus [cm]: 3,8
• Manufacturer: FEBEST

• Installatsiooni pool: Esisild
• Garantii: 4 aastat garantii
• Kaal (kg): 1,76
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV436

• Engine Code: AZA
• Vehicle Identification Number (VIN) from: ******4B*2*000001
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Materjal, äärik: NBR (Nitril-Butadien-Kautschuk)
• Laagriteostus: kuullaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 0,806
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Weight [kg]: 0.84
• Outer Diameter 1 [mm]: 82
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Construction Year from: 05.2001
• Construction Year to: 08.2001
• Installatsiooni pool: Esisild
• Garantii: 4 aastat garantii
• Kaal (kg): 1,7
• Aukude arv: 4
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV029

• Fitting Position: Right, Left, Rear Axle
• Manufacturer: SNR

• Fitting Position: Front Axle
• Construction Year from: 05.2001
• Tyre Size: 17/18
• Laius (mm): 40,25
• Siseläbimõõt [mm]: 43
• Välisläbimõõt 1 [mm]: 84
• Välisläbimõõt 2 [mm]: 127
• Kinnitusaukude hulk: 4
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Laius (mm): 37
• Siseläbimõõt [mm]: 43, 45
• Välisläbimõõt [mm]: 82
• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 1,202
• Piirangutega toode/piirangu info: mutritega, ajamivõlli kruvidega
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Versioon: One
• Keermemõõt: M12X1,5
• Siseläbimõõt [mm]: 45
• Veljeaukude hulk: 4
• Siseläbimõõt 1 [mm]: 43
• Siseläbimõõt 2 (mm): 45
• Manufacturer: GSP

• Construction Year to: 05.2001
• Track Width, rear [mm]: 1,558, 1,570
• Fitting Position: Rear Axle
• Required quantity: 2
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: SKF

• Installatsiooni pool: Esisild
• Siseläbimõõt 1 [mm]: 43
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle Left, Front Axle Right
• Keermemõõt: M12X1,5
• Siseläbimõõt [mm]: 45
• Veljeaukude hulk: 4
• Siseläbimõõt 1 [mm]: 43
• Siseläbimõõt 2 (mm): 45
• Manufacturer: GSP

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Laius (mm): 40,3
• Siseläbimõõt [mm]: 43
• Quality class: PJ
• Name: Wheel hub

• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laius (mm): 37
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Right, Left, Front Axle
• Manufacturer: SNR /NTN-SNR/

• Fitting Position: Front Axle
• Construction Year to: 07.2001
• Block Separation:
• Construction Year from: 09.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Rim Size [inch]: 15.0, 16.0
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laius (mm): 37
• SVHC: SVHS aineid ei esine
• Name: LU 713610350
• Manufacturer: FAG

• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 02.1999
• Construction Year to: 05.2001
• Fitting Position: Front Axle, Rear Axle
• Required quantity: 2
• Block Separation:
• Track Width, rear [mm]: 1,558, 1,570
• Kaal (kg): 1,056
• pakendi pikkus [cm]: 10,9
• pakendi laius [cm]: 8,4
• pakendi kõrgus [cm]: 10,9
• Välisläbimõõt [mm]: 82
• Siseläbimõõt [mm]: 43
• Laius (mm): 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Vehicle Identification Number (VIN) to: ******4B*2*031500
• Fitting Position: Front Axle
• Rim Size [inch]: 17.0, 18.0
• Block Separation:
• Vehicle Identification Number (VIN) from: ******4B*2*031501
• Laius (mm): 40
• Laagriteostus: kuullaager
• Välisläbimõõt 1 [mm]: 82
• Välisläbimõõt 2 [mm]: 85
• Siseläbimõõt 1 [mm]: 43
• Kaal (kg): 1,57
• Siseläbimõõt 2 (mm): 45
• Piirangutega toode/piirangu info: ajamivõlli kruvidega
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piirangutega toode/piirangu info 2: koos kruvidega
• Välisläbimõõt [mm]: 82
• Siseläbimõõt [mm]: 45
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Construction Year from: 09.2001, 05.2001
• Vehicle Identification Number (VIN) from: 4B-2-031501
• Block Separation:
• Construction Year to: 09.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Rim Size [inch]: 17.0, 18.0
• Laius (mm): 40,2
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 85
• Laius 1 (mm): 37
• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• Siseläbimõõt 2 (mm): 45
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle
• Construction Year from: 09.2001
• Special Purpose Vehicle: for armoured vehicles
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt 1 [mm]: 85
• Siseläbimõõt [mm]: 43
• Laius (mm): 40,3
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 713610380

• Construction Year from: 02.1999
• Construction Year to: 05.2001
• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Kaal (kg): 1,613
• pakendi pikkus [cm]: 13,7
• pakendi laius [cm]: 13,1
• pakendi kõrgus [cm]: 7,3
• Piirangutega toode/piirangu info 2: ilma flantsita
• Välisläbimõõt [mm]: 82
• Siseläbimõõt [mm]: 43
• Laius (mm): 40,2
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• Construction Year from: 09.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Rim Size [inch]: 17.0, 18.0
• Block Separation:
• Vehicle Identification Number (VIN) from: 4B-2-031501
• Suspension: for vehicles with heavy duty suspension
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Välisläbimõõt 1 [mm]: 85
• Siseläbimõõt [mm]: 43
• Siseläbimõõt 2 (mm): 45
• Laius (mm): 40,3
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 713610430

• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Fitting Position: Front Axle
• Required quantity: 2
• Laius (mm): 40,25
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Piirangutega toode/piirangu info 2: ilma flantsita
• Manufacturer: SKF