• Brake Type: Disc Brake
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Välisläbimõõt 1 [mm]: 50
• Välisläbimõõt 2 [mm]: 45
• Kõrgus 1 (mm): 14,75
• Kõrgus 2 (mm): 17
• Lisainfo: Wheel bearing kit, rear, for one wheel
• Additional information: Wheel bearing kit, rear, for one wheel

• Fitting Position: Front Axle Left, Front Axle Right
• Välisläbimõõt [mm]: 82
• Siseläbimõõt [mm]: 43
• Laius (mm): 37
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing, front
• Additional information: Wheel bearing, front

• Siseläbimõõt [mm]: 40
• Välisläbimõõt 1 [mm]: 52
• Välisläbimõõt 2 [mm]: 58
• Kõrgus (mm): 7,5
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Tolmukaitse: koos tolmu kaitseäärisega
• Installatsiooni pool: Tagasild mõlemapoolselt
• Manufacturer: TOPRAN
• Lisainfo: 103 514 HP
• Additional information: 103 514 HP

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Jämedus/Tugevus (mm): 6,2, 7,5
• Siseläbimõõt [mm]: 40
• Välisläbimõõt [mm]: 52
• Materjal: NBR (Nitril-Butadien-Kautschuk)
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 0,012
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: esisild mõlemapoolselt, sees
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing, front, inner
• Additional information: Wheel bearing, front, inner

• Kõrgus (mm): 14,7
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 50,3
• Installatsiooni pool: Esisild
• Kaal (kg): 0,11
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• Installatsiooni pool: Tagasild, Tagasild vasakul, Tagasild paremal
• Seerianumber: KLT-AU-001
• Manufacturer: NTY
• Name: NTY KLT-AU-001

• Braking System: for vehicles with drum brakes on the rear axle
• Installatsiooni pool: Tagasild mõlemapoolselt
• Laius 1 (mm): 15,5
• Laius 2 (mm): 14
• Välisläbimõõt 1 [mm]: 45
• Välisläbimõõt 2 [mm]: 50
• Siseläbimõõt 1 [mm]: 19
• Siseläbimõõt 2 (mm): 29
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Välisläbimõõt 1 [mm]: 50,3
• Välisläbimõõt 2 [mm]: 45,2
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle Left, Rear Axle Right
• Laius 1 (mm): 16,637
• Laius 2 (mm): 14,732
• Välisläbimõõt 1 [mm]: 45,237
• Välisläbimõõt 2 [mm]: 50,292
• Siseläbimõõt 1 [mm]: 19
• Siseläbimõõt 2 (mm): 29
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info 2: koos võllitihendiga
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Välisläbimõõt 1 [mm]: 50,3
• Välisläbimõõt 2 [mm]: 45,2
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Välisläbimõõt 1 [mm]: 50
• Laius 1 (mm): 14
• Laius 2 (mm): 15
• Välisläbimõõt 2 [mm]: 45
• Kaal (kg): 0,34
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Laius (mm): 14,7
• Siseläbimõõt [mm]: 19,1
• Välisläbimõõt [mm]: 45,2
• Laius 1 (mm): 14,2
• Laius 2 (mm): 15,5
• Välisläbimõõt 1 [mm]: 50,3
• Siseläbimõõt 1 [mm]: 29
• Manufacturer: OPTIMAL

• Laagriteostus: koonusrulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Välisläbimõõt 1 [mm]: 45
• Välisläbimõõt 2 [mm]: 50
• Laius 1 (mm): 15,5
• Laius 2 (mm): 14
• Siseläbimõõt 1 [mm]: 19
• Kaal (kg): 0,234
• Siseläbimõõt 2 (mm): 29
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Siseläbimõõt 1 [mm]: 19
• Välisläbimõõt 1 [mm]: 45
• Laius 1 (mm): 15
• Siseläbimõõt 2 (mm): 29
• Välisläbimõõt 2 [mm]: 50
• Laius 2 (mm): 16
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• alternatiivne remondikomplekt: 100 598 0101, 100 598 0101/SK
• Installatsiooni pool: Tagasild, sees
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 50
• Kõrgus (mm): 14,73
• Laagriteostus: koonusrulllaager
• Manufacturer: MEYLE

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: REAR LR+RE
• Siseläbimõõt [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Laius 1 (mm): 14
• Laius 2 (mm): 45
• Kinnitusaukude hulk: 1
• Name: DA KWD1150
• Manufacturer: DAYCO

• Laagriteostus: koonusrulllaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Välisläbimõõt 1 [mm]: 45
• Välisläbimõõt 2 [mm]: 50
• Laius 1 (mm): 15,5
• Laius 2 (mm): 14
• Siseläbimõõt 1 [mm]: 19
• Kaal (kg): 0,234
• Siseläbimõõt 2 (mm): 29
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Name: SW 30 85 0008
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Laius (mm): 15,49
• Siseläbimõõt [mm]: 19,05
• Välisläbimõõt 1 [mm]: 50,29
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Välisläbimõõt 1 [mm]: 50
• Laius 1 (mm): 14
• Installatsiooni pool: Tagasild paremal
• Manufacturer: SNR
• Name: SN R157.12

• Fitting Position: Rear Axle
• Siseläbimõõt [mm]: 19
• Välisläbimõõt [mm]: 45
• Kõrgus (mm): 17
• Laagriteostus: koonusrulllaager
• Manufacturer: MEYLE

alternatiivne remondikomplekt: 100 598 0002, 100 498 0023, 014 033 0048, 714 502 0006, 614 750 0009

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Siseläbimõõt 1 [mm]: 19,1
• Välisläbimõõt 1 [mm]: 45,2
• Laius 1 (mm): 16,6
• Siseläbimõõt 2 (mm): 29
• Välisläbimõõt 2 [mm]: 50,3
• Laius 2 (mm): 14,7
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 713610240
• Lisainfo: 713 6102 40 FAG
• Additional information: 713 6102 40 FAG

• Quantity: 2
• Installatsiooni pool: taga
• Üldine informatsioon: wheel bearing with assembly parts; rear
• Manufacturer: VIKA

• Fitting Position: Front Axle both sides
• Välisläbimõõt [mm]: 82
• Siseläbimõõt 1 [mm]: 45
• Siseläbimõõt 2 (mm): 42,8
• Laius (mm): 37
• Laagriteostus: kuullaager
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 07.1992
• Laius (mm): 14,7, 17
• Siseläbimõõt [mm]: 29, 19
• Välisläbimõõt [mm]: 50,3, 45
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Manufacturer: METZGER

• Fitting Position: Front Axle Left, Front Axle Right
• Hulk telje kohta: 2
• Siseläbimõõt 1 [mm]: 45
• Siseläbimõõt 2 (mm): 43
• Laius (mm): 37
• Välisläbimõõt [mm]: 82
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laagriteostus: kuullaager
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Laius 1 (mm): 37
• Välisläbimõõt 1 [mm]: 82
• Siseläbimõõt 1 [mm]: 43
• Siseläbimõõt 2 (mm): 45
• Manufacturer: GSP

• Brake Type: Disc Brake
• Installatsiooni pool: Tagasild
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt 1 [mm]: 29
• Siseläbimõõt 2 (mm): 19
• Välisläbimõõt 1 [mm]: 50
• Välisläbimõõt 2 [mm]: 45
• Kõrgus 1 (mm): 14,73
• Kõrgus 2 (mm): 17
• Laagriteostus: koonusrulllaager
• Manufacturer: MEYLE

Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Installatsiooni pool: Esisild
• Välisläbimõõt [mm]: 82
• Kõrgus (mm): 37
• Siseläbimõõt [mm]: 43
• Kaal (kg): 0,768
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt 1 [mm]: 82
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Installatsiooni pool: esisild vasakul, esisild paremal
• Hulk telje kohta: 2
• Välisläbimõõt [mm]: 82
• Siseläbimõõt 1 [mm]: 45
• Siseläbimõõt 2 (mm): 43
• Laius (mm): 37
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Piirangutega toode/piirangu info 2: koos kruviga
• Täiskomplekt:
• Manufacturer: TOPRAN

Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Installatsiooni pool: esisild mõlemapoolselt
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: JPN

• Fitting Position: Front Axle both sides
• Installatsiooni pool: Esisild, Tagasild
• Garantii: 4 aastat garantii
• Kaal (kg): 1,87
• Ava Ø 1 (mm): 112
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV438

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Quality class: PJ
• Name: Wheel bearing kit

• Model Year from: 1991
• Model Year to: 1992
• Installatsiooni pool: esisild mõlemapoolselt
• Kaal (kg): 0,765
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• pakendi pikkus [cm]: 8,2
• pakendi laius [cm]: 8,2
• pakendi kõrgus [cm]: 3,7
• Manufacturer: FEBEST

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Kaal (kg): 0,84
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: METALCAUCHO

• Välisläbimõõt [mm]: 82
• Hulgaühik: Komplekt
• Siseläbimõõt [mm]: 43
• Installatsiooni pool: Esisild
• Kaal (kg): 0,694
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• Siseläbimõõt [mm]: 43
• Laius 1 (mm): 37
• Kinnitusaukude hulk: 1
• Name: DA KWD1060
• Manufacturer: DAYCO

• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 1,036
• Piirangutega toode/piirangu info 2: koos kruvidega, koos mutriga
• Piirangutega toode/piirangu info: ajamivõlli kruvidega
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Siseläbimõõt 2 (mm): 45
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Weight [kg]: 0.84
• Outer Diameter 1 [mm]: 82
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Required quantity: 2
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Manufacturer: SKF
• Name: SK VKBA1356

• Fitting Position: Right, Front Axle
• Name: SN R157.11
• Manufacturer: NTN-SNR

• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laius (mm): 37
• Installatsiooni pool: esisild vasakul, esisild paremal
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Right, Front Axle
• Manufacturer: SNR
• Name: SN R157.18

• Fitting Position: Front Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laius (mm): 37
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG
• Name: LU 713610090

• Construction Year from: 05.1991
• Fitting Position: Front Axle
• Required quantity: 2
• Kaal (kg): 1,056
• pakendi pikkus [cm]: 10,9
• pakendi laius [cm]: 8,4
• pakendi kõrgus [cm]: 10,9
• Välisläbimõõt [mm]: 82
• Siseläbimõõt [mm]: 43
• Laius (mm): 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ