Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle both sides
-
Siseläbimõõt [mm]: 63,
9 -
Laius (mm): 8,
3 -
Välisläbimõõt [mm]: 73,
7 - Hammastehulk ABS-rõngas: 45
- Manufacturer: TRISCAN
- Lisainfo: VAG
- Additional information: VAG
- Piirangutega toode/piirangu info 2: koos kaanega
- vasak/paremroolimine: vasakpoolse roolimise jaoks
- Manufacturer: JP GROUP
- Lisainfo: Brake fluid tank
- Additional information: Brake fluid tank
- Outer Diameter [mm]: 18.8
- Manufacturer: FAST
- Pikkus (mm): 32
-
Välisläbimõõt [mm]: 18,
8 -
Kaal (kg): 0,
005 - Manufacturer: FEBI BILSTEIN
- Additional information: F15340
- Lisainfo: F15340
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Manufacturer: METZGER
Fitting Position: Front Axle Left, Front Axle Right, Rear Axle Left, Rear Axle Right
- Fitting Position: Front Axle
-
Laius (mm): 8,
3 - Hammastehulk ABS-rõngas: 45
-
Siseläbimõõt [mm]: 63,
9 -
Välisläbimõõt [mm]: 73,
7 - Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Front Axle,
Right, Left, Wheel Side - Number of Teeth: 45
- Width [mm]: 8.1
- Inner Diameter [mm]: 64
- Outer Diameter [mm]: 74
-
Fabrication Number: NZA-
AU- 002 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Installatsiooni pool: Tagasild mõlemapoolselt
- Manufacturer: DELLO AUTOMEGA
- Additional information: 110100510 DELLO
- Lisainfo: 110100510 DELLO
- Fitting Position: Rear Axle both sides
- Siseläbimõõt [mm]: 67
- Laius (mm): 11
-
Välisläbimõõt [mm]: 106,
8 - Hammastehulk ABS-rõngas: 45
- Manufacturer: TRISCAN
- Lisainfo: AUDI
- Additional information: AUDI
- Installatsiooni pool: Tagasild mõlemapoolselt
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fitting Position: Front Axle Left,
Front Axle Right -
Fabrication Number: HCA-
AU- 000 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Fitting Position: Rear Axle Left,
Rear Axle Right -
Fabrication Number: HCA-
AU- 001 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Pinge [V]: 12
- OE-numbri jaoks: 001 542 6719
- Ühenduste arv: 6
- Manufacturer: TRUCKTEC
-
Siseläbimõõt [mm]: 66,
8 -
Välisläbimõõt [mm]: 106,
8 - Installatsiooni pool: Tagasild
- Hammastehulk ABS-rõngas: 45
- Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Front Axle
- Sensor Type: Passive sensor
- Number of pins: 2
- Cable Length [mm]: 911
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Inner Diameter [mm]: 67
- Outer Diameter [mm]: 107
- Thickness [mm]: 6
- Number of Teeth: 45
- Manufacturer: METZGER
- Fitting Position: Rear Axle
- vajaminev tükihulk: 2
- Manufacturer: DELLO AUTOMEGA
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Anduritüüp: passiivne andur
-
Lisainfo: Sensor,
wheel speed -
Additional information: Sensor,
wheel speed
- Siseläbimõõt [mm]: 68
- Välisläbimõõt [mm]: 107
- Hammastehulk ABS-rõngas: 45
-
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal -
Kaal (kg): 0,
175 - Manufacturer: FEBI BILSTEIN
- Additional information: F27176
- Lisainfo: F27176
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
Front Axle Right, Front Axle Left -
Manufacturer: AUTO-
GH
- Fitting Position: Rear Axle both sides
- Number of Teeth: 45
- Inner Diameter [mm]: 67
- Outer Diameter [mm]: 107
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Front
- General Information: ABS speed sensor; front
- Manufacturer: VIKA
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Piirangutega toode/piirangu info 2: koos kaabliga
- Pikkus (mm): 955
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Braking/Drive Dynamics: for vehicles without ASR
-
Piirangutega toode/piirangu info 2: koos kaanega,
koos anduriga - Materjal: Plastik
- jälgida süsteemi mahutavust:
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Drive Type: Front-
Wheel Drive -
Installatsiooni pool: Tagasild vasakul,
Tagasild paremal - Piirangutega toode/piirangu info 2: koos kaabliga
- Pikkus (mm): 1 290
-
Piduri-/sõidudünaamika: Sõidukitele koos ABS-
ga - Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Fabrication Number: CZW-
VW- 027 -
Supplementary Article/Info 2: with lid,
with sensor - Number of connectors: 2
- Material: Plastic
- Observe system fill quantity:
- Manufacturer: NTY
- Fitting Position: Front Axle
- Length [mm]: 840
- Number of pins: 2
- Plug Type: Female
- Connector Shape: round
- Guarantee: 3 years guarantee
- Voltage [V]: 12
- Weight [kg]: 0.13
- Colour: black
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 06SKV056
- Manufacturer: ESEN SKV
- Fitting Position: Rear Axle
-
Length [mm]: 1,
180 - Number of pins: 2
- Plug Type: Female
- Connector Shape: round
- Guarantee: 3 years guarantee
- Voltage [V]: 12
- Weight [kg]: 0.14
- Colour: black
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Name: CE 06SKV057
- Manufacturer: ESEN SKV
-
Kaal (kg): 9,
5 - Uus osa:
-
pakendi pikkus [cm]: 72,
5 - pakendi laius [cm]: 59
- pakendi kõrgus [cm]: 34
- Fitting Position: Front Axle
- Anduritüüp: passiivne andur
- kasutatud klemmide arv: 2
- Kaablipikkus (mm): 910
- Manufacturer: DELPHI LOCKHEED HAMULCE
- Name: DE SS20169
- Fitting Position: Front Axle
- Length [mm]: 840
- Number of pins: 2
- Plug Type: Female
- Connector Shape: round
- Voltage [V]: 12
- Weight [kg]: 0.13
- Colour: black
- Operating Mode: Electric
- Always compare old and new part (in particular OE No.):
- Manufacturer: ENERGY
- for OE number: 8E0 611 301
- Width [mm]: 116.6
- Height [mm]: 61
- Length [mm]: 165
- Weight [g]: 109
- Guarantee: 3 years guarantee
- Manufacturer: AT AUTOTEILE GERMANY
General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.
- Fitting Position: Rear Axle
- Anduritüüp: passiivne andur
- kasutatud klemmide arv: 2
- Kaablipikkus (mm): 1 199
- Name: DE SS20168
- Manufacturer: DELPHI
- Supplementary Article/Info 2: with cap
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Installatsiooni pool: Tagasild
- Garantii: 5 aastat garantii
- Manufacturer: HITACHI
-
Piirangutega toode/piirangu info 2: koos anduriga,
koos kaanega -
Kaal (kg): 0,
241 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Ühenduste arv: 2
-
Piirangutega toode/piirangu info 2: koos kaanega,
koos anduriga -
Kaal (kg): 0,
145 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Supplementary Article/Info 2: with lid,
with sensor -
Left-/right-hand drive vehicles: for left-
hand drive vehicles - Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks