• Construction Year from: 08.1991
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• for OE number: 048906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 521
• Number of pins: 3
• Weight [g]: 100
• Gross Weight [g]: 130
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
100 (4A, C4), 12.90-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
100 (4A, C4), 12.90-
(kvaliteediklass: Q)"

• Üldine informatsioon: temperature sensor
• Manufacturer: VIKA

• Thread Size: M10x1,0
• Colour: black
• Number of connectors: 1
• Weight [kg]: 0.019
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Manufacturer: MAGNETI MARELLI

• Pistikkontaktide arv: 3
• Pistiku värv: sinine
• Seerianumber: ESS-AU-001
• Manufacturer: NTY

• Pistikkontaktide arv: 3
• Pistiku värv: roheline
• Seerianumber: ESS-AU-000
• Manufacturer: NTY

• Üldine informatsioon: temperature sensor
• Manufacturer: VIKA

• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AAH
• Cable Length [mm]: 730
• Manufacturer: KAMOKA

• Thread Size: M10x1,0
• Colour: white
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.029
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M 10x1
• Number of pins: 2
• Housing Colour: white
• Manufacturer: FAE

• Engine Code: AAH
• Number of pins: 2
• Colour: white
• Thread Size: M10x1
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: AAH
• Number of pins: 2
• Colour: white
• Thread Size: M10x1
• Spanner Size: 19
• Name: EP 1.830.171
• Manufacturer: EPS

• Number of pins: 3
• Supplementary Article/Info 2: with cable
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Korpusevärv: valge
• Keermemõõt: M10 x 1,0
• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info: koos tihendiga
• Temperatuurivahemik [°C]: 25, 80
• Võimsus [W]: 0,06
• Manufacturer: METZGER

• Number of pins: 3
• Connector Shape: rectangular
• Number of mounting bores: 2
• Sensor Type: Hall Sensor
• for OE number: 078905161C
• Manufacturer: DELLO AUTOMEGA

Manufacturer: MAGNETI MARELLI

• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 3
• Garantii: 3 aastat garantii
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ESEN SKV

Manufacturer: MAGNETI MARELLI

• Cable Length [mm]: 535
• Number of pins: 3
• Housing Colour: blue
• Lisainfo: Knock sensor
• Additional information: Knock sensor

• Pistikkontaktide arv: 3
• Värv: must
• Manufacturer: AIC

Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Opening Temperature [°C]: 120
• Number of pins: 3
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 3
• Connector Shape: rectangular
• Sensor Type: Hall Sensor
• Number of mounting bores: 2
• Supplementary Article/Info 2: without cable
• for OE number: 078 905 161 C
• Manufacturer: MEAT&DORIA

• Lambda Sensor: Regulating Probe
• Construction Year from: 08.1991
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Ülekandeliinide arv: 3
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

Manufacturer: BOSCH

• Number of circuits: 4
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

• Manufacturer: BOSCH
• Name: BS 0261231036

• tootekoodile: 054 905 377 G
• Laius 1 (mm): 91
• Kõrgus 1 (mm): 37
• Pikkus 1 [mm]: 834
• Kaal (g): 75
• Garantii: 3 aastat garantii
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Cable Length [mm]: 550
• Number of pins: 3
• Housing Colour: blue
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe
• Construction Year from: 08.1991
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV903
• Manufacturer: ESEN SKV

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Diameter [mm]: 90
• Length [mm]: 570
• Height [mm]: 37
• Cable Length [mm]: 535
• Weight [kg]: 0.07
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Construction Year from: 08.1991
• Exhaust System: for pre-catalytic converter
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• Lambda Sensor: Regulating Probe
• Construction Year from: 09.1992
• Pinge [V]: 12
• Pikkus (mm): 710
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV021

• Construction Year from: 08.1991
• Transmission Type: Automatic Transmission
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Name: DN DOX-0116
• Manufacturer: DENSO
• Lisainfo: DOX-0116 DENSO
• Additional information: DOX-0116 DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Catalytic Converter Type: without catalytic convertor
• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 710
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,16
• Takistus [oom]: 4,5
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY

• Lambda Sensor: Regulating Probe
• Construction Year to: 09.1992
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Pikkus (mm): 670
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV063
• Manufacturer: ESEN SKV

• Construction Year from: 08.1991
• Transmission Type: Automatic Transmission
• Catalytic Converter Type: for vehicles with catalytic converter
• Exhaust System: for pre-catalytic converter
• Quality: OE
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: Lambda sensor
• Quality class: Q

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
ESCORT IV KOMBI (AWF
(kvaliteediklass: Q)"

• Construction Year to: 09.1992
• Lambda Sensor: Regulating Probe, Finger probe, Heated
• Vehicle Identification Number (VIN) to: 4A-P-022 306
• Cable Length [mm]: 490
• Manufacturer: DELPHI
• Name: DE ES11000-12B1

• Vehicle Identification Number (VIN) to: ******4A*P*022306
• Lambda Sensor: Heated, Regulating Probe
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 3
• Cable Length [mm]: 500
• Weight [kg]: 0.098
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Lambda andur: Diagnoosisond
• Üldine informatsioon: lambda probe; 4 wire
• Manufacturer: VIKA

• Engine Code: AAH
• Catalytic Converter Type: for vehicles with catalytic converter
• Vehicle Identification Number (VIN) from: 4A-P-022307
• Line insulation design: with silicone-coated woven-fibre insulation
• Number of pins: 4
• for OE number: V99760001
• Cable Length [mm]: 210
• Number of circuits: 4
• Weight [kg]: 0.09
• Length [mm]: 350
• Exhaust System: after catalytic converter
• Manufacturer: VEMO GERMANY

Lambda Sensor: Regulating Probe, Finger probe, Heated, Thread pre-greased Supplementary Article/Supplementary Info: with squeeze connector, with shrink squeeze connector General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AAH
• Manufacturer: EPS

• Number of pins: 3
• Housing Type: with housing
• Manufacturer: JP GROUP
• Lisainfo: Air Mass Sensor
• Additional information: Air Mass Sensor

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Block Separation:
• Number of circuits: 3
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: BOSCH

Catalytic Converter Type: for vehicles with catalytic converter, for vehicles without catalytic convertor

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Catalytic Converter Type: for vehicles with catalytic converter
• Number of circuits: 3
• Overall Length [mm]: 506
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

• Lambda Sensor: Regulating Probe
• Fitting Position: before catalytic converter
• Catalytic Converter Type: for vehicles without catalytic convertor
• Number of circuits: 3
• Overall Length [mm]: 726
• Available as universal article as well, see article no.: 0258986502
• Recommended change interval [km]: 160,000
• Manufacturer: BOSCH

Manufacturer: MAGNETI MARELLI