Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Installatsiooni pool: stirnseitig
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 47
- Jämedus/Tugevus (mm): 10
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Installatsiooni pool: kastipoolselt
- Siseläbimõõt [mm]: 85
- Välisläbimõõt [mm]: 105
- Jämedus/Tugevus (mm): 11
-
Materjal: FPM
(Fluor- Kautschuk)/ ACM (Polyacryl- Kautschuk) -
Lisainfo: Oil seal for crankshaft,
85x105x11 mm -
Additional information: Oil seal for crankshaft,
85x105x11 mm
- Installatsiooni pool: kastipoolselt
- Siseläbimõõt [mm]: 85
- Välisläbimõõt [mm]: 105
- Laius 1 (mm): 9
- Laius 2 (mm): 11
- Korpusetüüp: koos korpusega
- Lisainfo: Seal flange for crankshaft
- Additional information: Seal flange for crankshaft
- Quantity per packing unit: 10
- Fitting Position: frontal sided
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Engine Code: AAD
- Fitting Position: Front
- Height 1 [mm]: 10
- Outer Diameter 1 [mm]: 47
- Inner Diameter 1 [mm]: 32
-
Material: FPM
(fluoride rubber) - for OE number: 026103085D
- Swirl Type: Alternating Twist
- Dust Cover: with dust lip
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: COT
- Additional information: 12012709
- Lisainfo: 12012709
- Required quantity: 1
- Fitting Position: frontal sided
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 47
- Laius (mm): 10
- SVHC: SVHS aineid ei esine
- Manufacturer: INA
- Fitting Position: frontal sided
- Engine Code: AAD
-
Materjal: FPM
(Fluor- Kautschuk) - Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 47
- Kõrgus (mm): 10
- Tüüp simmerling tihend: A SL
- Pöördeliik: Vahelduvkeere
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: REI
-
Lisainfo: 81-
19299- 10 -
Additional information: 81-
19299- 10
- Fitting Position: frontal sided
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 47
- Kõrgus (mm): 10
- Tüüp simmerling tihend: ASW
- Pöördeliik: Vahelduvkeere
-
Materjal: FPM
(Fluor- Kautschuk)/ ACM (Polyacryl- Kautschuk) - Tolmukaitse: koos tolmu kaitseäärisega
- alternatiivne remondikomplekt: 325.156
- Manufacturer: ELRING
- Lisainfo: 325.155 ELR
- Additional information: 325.155 ELR
- Jämedus/Tugevus (mm): 10
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 47
-
Materjal: FPM
(Fluor- Kautschuk) - Installatsiooni pool: stirnseitig
-
Kaal (kg): 0,
03 - Manufacturer: FEBI BILSTEIN
- Additional information: FE03598
- Lisainfo: FE03598
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thickness [mm]: 10
- for OE number: 068 103 085 E
- Fitting Position: frontal sided
- Inner Diameter [mm]: 32
- Outer Diameter [mm]: 47
- Weight [kg]: 0.023
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AAD
- Fitting Position: frontal sided
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 47
- Kõrgus (mm): 10
- Pöördeliik: Vahelduvkeere
-
Name: VOLLI RONGASTIHEND,
NUKKVOLL - Manufacturer: AJU
- Fitting Position: frontal sided
- Siseläbimõõt [mm]: 32
- Välisläbimõõt [mm]: 47
- Kõrgus (mm): 10
- Tüüp simmerling tihend: ASW
- Pöördeliik: Vahelduvkeere
-
Materjal: FPM
(Fluor- Kautschuk) - Tolmukaitse: koos tolmu kaitseäärisega
- alternatiivne remondikomplekt: 325.155
- Manufacturer: ELRING
- Engine Code: AAD
- Installatsiooni pool: kastipoolselt
- Kõrgus (mm): 12
-
Materjal: NBR
(Nitril- Butadien- Kautschuk) - Siseläbimõõt [mm]: 85
- Välisläbimõõt [mm]: 105
- Manufacturer: BGA
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Outer Diameter [mm]: 105
- Width [mm]: 11
-
Name: Volli rongastihend,
Vntvoll - Manufacturer: DRM
- Jämedus/Tugevus (mm): 11
- Siseläbimõõt [mm]: 85
- Välisläbimõõt [mm]: 105
-
Materjal: FPM
(Fluor- Kautschuk) - Installatsiooni pool: kastipoolselt
-
Kaal (kg): 0,
058 - Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: transmission sided
- Siseläbimõõt [mm]: 85
- Välisläbimõõt [mm]: 105
- Kõrgus (mm): 11
- Tüüp simmerling tihend: ASW
- Pöördeliik: Vasakkeere
-
Materjal: FPM
(Fluor- Kautschuk) - Tolmukaitse: koos tolmu kaitseäärisega
- alternatiivne remondikomplekt: 829.056
- Manufacturer: ELRING
- Lisainfo: 342.093 ELR
- Additional information: 342.093 ELR
- Fitting Position: transmission sided
- Engine Code: AAD
-
Materjal: FPM
(Fluor- Kautschuk) - Siseläbimõõt [mm]: 85
- Välisläbimõõt [mm]: 105
- Kõrgus (mm): 11
- Tüüp simmerling tihend: A SL
- Pöördeliik: Vasakkeere
- Kõrgus 1 (mm): 9
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: REI
-
Lisainfo: 81-
23708- 40 -
Additional information: 81-
23708- 40
- Quantity per packing unit: 5
- Jämedus/Tugevus (mm): 11
- Siseläbimõõt [mm]: 85
- Välisläbimõõt [mm]: 105
- Installatsiooni pool: kastipoolselt
-
Kaal (kg): 0,
103 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Supplementary Article/Info 2: with flange
- Fitting Position: transmission sided
-
Fabrication Number: NUP-
VW- 006 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Engine Code: AAD
- Installatsiooni pool: kastipoolselt
- Kõrgus 1 (mm): 11
- Välisläbimõõt 1 [mm]: 105
- Siseläbimõõt 1 [mm]: 85
-
Materjal: FPM
(Fluor- Kautschuk) - OE-numbri jaoks: 068103051G
- Pöördeliik: Vasakkeere
- Tolmukaitse: koos tolmu kaitseäärisega
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Quantity per packing unit: 5
- Fitting Position: transmission sided
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: transmission sided
- Piirangutega toode/piirangu info 2: koos flantsiga
- Välisläbimõõt [mm]: 111
- Siseläbimõõt [mm]: 85
- Kõrgus (mm): 16
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: transmission sided
- Siseläbimõõt [mm]: 85
- Välisläbimõõt [mm]: 105
- Kõrgus (mm): 11
- Tüüp simmerling tihend: ASW
- Pöördeliik: Vasakkeere
-
Materjal: FPM
(Fluor- Kautschuk) - Tolmukaitse: koos tolmu kaitseäärisega
- Piirangutega toode/piirangu info 2: koos paigaldushülsiga
- Manufacturer: ELRING
- Fitting Position: transmission sided
- Weight [kg]: 0.17
- Inner Diameter [mm]: 85
- Required quantity: 1
- Supplementary Article/Info 2: with flange
- General Information: sealing flang; rear
- Manufacturer: VIKA
- Engine Code: AAD
- Quantity per packing unit: 5
- Installatsiooni pool: kastipoolselt
- Siseläbimõõt [mm]: 85
-
Kaal (kg): 0,
265 - Manufacturer: VAICO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AAD
- Installatsiooni pool: kastipoolselt
- Piirangutega toode/piirangu info 2: koos paigaldushülsiga
- Kõrgus 1 (mm): 11
- Välisläbimõõt 1 [mm]: 105
- Siseläbimõõt 1 [mm]: 85
-
Materjal: FPM
(Fluor- Kautschuk) - OE-numbri jaoks: 068103071F
- Pöördeliik: Vahelduvkeere
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Fitting Position: transmission sided
- Inner Diameter [mm]: 85
- Radial Shaft Seal Design: SP
- Housing Type: with housing
-
Name: Volli rongastihend,
Vntvoll - Manufacturer: DRM
- Installatsiooni pool: rihmarattapoolne
-
Name: VOLLI RONGASTIHENDIKOMPLEKT,
MOOTOR - Manufacturer: COT
- Additional information: 289077
- Lisainfo: 289077
- Outer Diameter [mm]: 47
- Thickness [mm]: 10
- Inner Diameter [mm]: 32
- Fitting Position: transmission sided
- Weight [kg]: 0.195
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AAD
- Installatsiooni pool: kastipoolselt
- Piirangutega toode/piirangu info 2: koos paigaldushülsiga
-
Kõrgus 1 (mm): 15,
7 - Välisläbimõõt 1 [mm]: 131
- Välisläbimõõt 2 [mm]: 152
- Siseläbimõõt 1 [mm]: 85
-
Materjal: PTFE
(Polytetrafluorethylen) - OE-numbri jaoks: 028103171B
- Pöördeliik: Vahelduvkeere
-
Name: VOLLI RONGASTIHEND,
VNTVOLL - Manufacturer: COT
- Fitting Position: transmission sided
- Weight [kg]: 0.17
- Inner Diameter [mm]: 85
- Required quantity: 1
- Supplementary Article/Info 2: with flange
- General Information: sealing flang; rear
- Manufacturer: VIKA
- Fitting Position: transmission sided
- Siseläbimõõt [mm]: 85
- Tüüp simmerling tihend: SP
- Pöördeliik: Vasakkeere
- Korpusetüüp: koos korpusega
- Piirangutega toode/piirangu info 2: koos paigaldushülsiga
- Montaažiinfo: Paigaldamine kuiv ja ilma täiendava õli ja rasva
- Manufacturer: ELRING
- Lisainfo: 804.850 ELR
- Additional information: 804.850 ELR
Materjal: PTFE (Polytetrafluorethylen)/ACM (Polyacryl-Kautschuk)
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks