• Number of pins: 2
• Colour: blue
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 2
• Colour: white
• External Thread [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 3
• Switch Point [°C]: 118
• Colour: brown
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for cooling system 118 C, M14x1.5
• Additional information: Thermo switch for cooling system 118 C, M14x1.5

• Exhaust System: for pre-catalytic converter
• for OE number: 048906265
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 521
• Number of pins: 3
• Weight [g]: 100
• Gross Weight [g]: 130
• Manufacturer: DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor Additional information: "Tootja: DENSO
100 (4A, C4), 12.90-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
100 (4A, C4), 12.90-
(kvaliteediklass: Q)"

• Välisläbimõõt [mm]: 18,8
• Manufacturer: FAST

• Number of pins: 1
• Thread Size: M10x1 mm
• Spanner Size: 13 mm
• for OE number: 049919563B
• Manufacturer: KAMOKA
• Additional information: 4080049 KAMOKA
• Lisainfo: 4080049 KAMOKA

• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ristkülik
• Seerianumber: ECP-AU-027
• Manufacturer: NTY

• Vehicle Equipment: for vehicles with automatic climate control
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: blue
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 100 191 HP
• Additional information: 100 191 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Housing Colour: white
• Spanner Size: 19
• for OE number: 26906161
• Manufacturer: KAMOKA

• Housing Colour: blue
• for OE number: 025906041A
• Manufacturer: KAMOKA

• Colour Coding: blue
• Number of pins: 1
• Measuring Range to [°C]: 180
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,OLITEMPERATUUR
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Temperature range to [°C]: 125
• Length [mm]: 25
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M10x1,0
• Colour: black
• Number of connectors: 1
• Weight [kg]: 0.019
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Length [mm]: 25
• Temperature range to [°C]: 125
• External Thread Size: M10 x 1
• Thread Length [mm]: 10.9
• Spanner Size: 14
• Number of connectors: 1
• Colour Coding: black
• Weight [kg]: 0.012
• Supplementary Article/Info 2: with seal ring
• Name: SW 99 90 1939
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,05
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 17SKV555
• Manufacturer: ESEN SKV

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission, 4-Speed Automatic Transmission

Manufacturer: MAGNETI MARELLI

• Üldine informatsioon: distance sensor
• Manufacturer: VIKA

• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Combi Switch Function: Reed Contact
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Lisainfo: Distance sensor
• Additional information: Distance sensor

• Thread Size: M10 x 1
• Spanner Size: 14
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Colour Coding: blue
• Weight [kg]: 0.019
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: white
• Number of pins: 2
• Thread Size: M10 x 1
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 025906041A
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: white
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: ACZ
• Number of pins: 1
• Colour: blue
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: blue
• Name: ANDUR,OLITEMPERATUUR
• Manufacturer: EPS

• Transmission Type: Manual Transmission
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Name: ANDUR,VAHEMAA
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: white
• Spanner Size: 19
• Thread Size: M10x1
• for OE number: 026906161
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Üldine informatsioon: temperature sensor
• Manufacturer: VIKA

• Transmission Type: Manual Transmission
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Name: ANDUR,VAHEMAA
• Manufacturer: MAX
• Lisainfo: 012409191D/MG
• Additional information: 012409191D/MG

• Number of pins: 2
• Housing Colour: blue
• Fitted Diameter [mm]: 20
• Manufacturer: FAE

• Installatsiooni pool: esisild vasakul, esisild paremal
• Seerianumber: HCA-AU-000
• Manufacturer: NTY

• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Voltage [V]: 12
• Colour Coding: blue
• Manufacturer: MAGNETI MARELLI
• Name: MM SPA106

• Thread Size: M10x1,0
• Colour: white
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 2
• Weight [kg]: 0.029
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ACZ
• Number of pins: 2
• Colour: white
• Thread Size: M10x1
• Spanner Size: 19
• Manufacturer: FACET

• Engine Code: ACZ
• Number of pins: 2
• Colour: white
• Thread Size: M10x1
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• Thread Size: M10x1.0
• Manufacturer: VERNET

• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 93 3825
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Code Letter: G89
• Weight [kg]: 0.009
• Manufacturer: VEMO GERMANY

Vehicle Equipment: for vehicles with automatic climate control, for vehicles with air conditioning General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Pistikkontaktide arv: 3
• Temperatuurivahemik kuni [°C]: 125
• Manufacturer: ERA

• Üldine informatsioon: speedometer
• Manufacturer: VIKA

• Sensor Type: Active sensor
• Manufacturer: KAMOKA

• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Seerianumber: HCA-AU-001
• Manufacturer: NTY

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: M10 x 1
• Number of connectors: 2
• Colour: white
• Weight [kg]: 0.025
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Installatsiooni pool: Esisild, esisild paremal, esisild vasakul
• Manufacturer: AUTO-GH

• General Information: interior temperature sensor
• Manufacturer: BORSEHUNG

• Installatsiooni pool: ees
• Üldine informatsioon: ABS speed sensor; front
• Manufacturer: VIKA

• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Cable Length [mm]: 910
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 955
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Drive Type: Front-Wheel Drive
• Fitting Position: Rear Axle Left, Rear Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,290
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Observe technical data:
• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: Alfa Romeo, Fiat, VAG
• Number of pins: 2
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Sensor Type: Hall Sensor
• Connector Shape: rectangular
• Number of pins: 3
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, Front Axle
• Sensor Type: Passive sensor
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Net weight [kg]: 0.13
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: NK

• Opening Temperature [°C]: 120
• Number of pins: 3
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Installatsiooni pool: Esisild
• Pikkus (mm): 840
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ümar
• Garantii: 3 aastat garantii
• Pinge [V]: 12
• Kaal (kg): 0,13
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 06SKV056
• Manufacturer: ESEN SKV

• Üldine informatsioon: impulse sender; crackshaft
• Manufacturer: VIKA

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: BMW, Volvo, VAG
• Number of pins: 3
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Number of pins: 3
• Connector Shape: rectangular
• Socket colour: light green
• Length [mm]: 730
• Sensor Type: Inductive Sensor
• for OE number: 078 905 381 A
• Name: Andur, v„ntvoll
• Manufacturer: MD

• Number of pins: 3
• Connector Shape: rectangular
• Sensor Type: Hall Sensor
• Number of mounting bores: 2
• Supplementary Article/Info 2: without cable
• for OE number: 078 905 161 C
• Manufacturer: MEAT&DORIA

• Installatsiooni pool: Esisild
• Pikkus (mm): 840
• Pistikkontaktide arv: 2
• Pistikute teostus: Female
• Pistikukatte kuju: ümar
• Pinge [V]: 12
• Kaal (kg): 0,13
• Värv: must
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 910
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE SS20169

• Sensor Type: Inductive Sensor
• Number of pins: 3
• Voltage [V]: 12
• Connector Shape: angled
• Supplementary Article/Info 2: with cable
• Resistor [Ohm]: 900
• Manufacturer: VALEO

• Engine Code: ACZ
• Cable Length [mm]: 750
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 1,199
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Number of pins: 2
• Weight [kg]: 0.02
• Manufacturer: VEMO

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Lambda Sensor: Regulating Probe
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Ülekandeliinide arv: 3
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ENERGY

• Number of circuits: 3
• Lambda Sensor: Regulating Probe
• Manufacturer: KAMOKA

Manufacturer: BOSCH

• tootekoodile: 012 409 191 D
• Laius 1 (mm): 72
• Kõrgus 1 (mm): 30
• Pikkus 1 [mm]: 111
• Kaal (g): 28
• Garantii: 3 aastat garantii
• Pistikkontaktide arv: 2
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Engine Code: ACZ
• Length [mm]: 750
• Manufacturer: FACET

• Lambda Sensor: Regulating Probe
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,08
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 09SKV903
• Manufacturer: ESEN SKV

• General Information: fuel pressure regulator
• Manufacturer: BORSEHUNG

• Engine Code: ACZ
• Length [mm]: 750
• Name: ANDUR, VŽNTVOLL
• Manufacturer: EPS

• Lambda Sensor: Regulating Probe
• Exhaust System: for pre-catalytic converter
• Lambda andur: Bistabiilne andur
• Pinge [V]: 12
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 4
• Kaal (kg): 0,09
• Takistus [oom]: 13
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV913

• for OE number: 078 906 265
• Lambda Sensor: Heated
• Name: Lambda andur
• Manufacturer: TRU

• Thread Size: M10x1
• Manufacturer: FAE

• Lambda Sensor: Regulating Probe
• Pinge [V]: 12
• Pikkus (mm): 710
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,11
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV021

• Sensor Type: Inductive Sensor
• Cable Length [mm]: 750
• Number of pins: 3
• Name: ANDUR, VŽNTVOLL
• Manufacturer: MEY

• Exhaust System: for pre-catalytic converter
• Quality: OE
• Manufacturer Restriction: DENSO
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 3
• Weight [g]: 95
• Gross Weight [g]: 144
• Manufacturer: DENSO
• Name: DN DOX-0116
• Lisainfo: DOX-0116 DENSO
• Additional information: DOX-0116 DENSO

Lambda Sensor: Regulating Probe, Heated, Finger probe, Lambda Sensor

• Lambda andur: Sond
• Pinge [V]: 12
• Pikkus (mm): 710
• Garantii: 3 aastat garantii
• Ülekandeliinide arv: 3
• Kaal (kg): 0,16
• Takistus [oom]: 4,5
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY