Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year to: 12.1988
-
Vehicle Identification Number (VIN) to: 44-
F- 300 000, 44- G- 031 043 - Fitting Position: Rear Axle
- Outer Diameter [mm]: 75
- Inner Diameter [mm]: 42
- Width [mm]: 37
- Braking System: for vehicles with disc brakes on the rear axle
- Manufacturer: JP GROUP
-
Lisainfo: Wheel bearing,
rear, 1 wheel -
Additional information: Wheel bearing,
rear, 1 wheel
- Height [mm]: 14.7
- Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50.3
- Fitting Position: Front Axle
- Weight [kg]: 0.11
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Alternative Repair Kit: 100 598 0101,
100 598 0101/ SK -
Fitting Position: Rear Axle,
inner - Inner Diameter [mm]: 29
- Outer Diameter [mm]: 50
- Height [mm]: 14.73
- Bearing Type: Tapered Roller Bearing
- Manufacturer: MEYLE
-
Fabrication Number: KLP-
AU- 004 - Rim Size [inch]: 16.0
-
Name: NTY KLP-
AU- 004 - Manufacturer: NTY
Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle Transmission Type: 5-Speed Manual Transmission, 5-Speed Automatic Transmission, Manual Transmission
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
- Manufacturer: DELLO AUTOMEGA
- Fitting Position: Front Axle
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Manufacturer: DENCKERMANN ZAWIESZENIE
- Width 1 [mm]: 37
- Outer Diameter 1 [mm]: 82
- Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Manufacturer: GSP
Fitting Position: Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right
- Vehicle Identification Number (VIN) from: 44J200100
- Fitting Position: Front Axle
- Width [mm]: 37
- Outer Diameter [mm]: 82
- Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY
- Fitting Position: Front Axle
- Outer Diameter [mm]: 82
- Height [mm]: 37
- Inner Diameter [mm]: 43
- Weight [kg]: 0.768
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Tandem-
axle Assembly - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter 1 [mm]: 82
- Manufacturer: METELLI LOZYSKA KOLA PIASTY
- Vehicle Identification Number (VIN) to: ******44*G*031043
- Width [mm]: 37
- Inner Diameter [mm]: 42
- Outer Diameter [mm]: 75
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 0.73
-
Supplementary Article/Supplementary Info: with fastening/
mounting material - Name: SW 30 90 3622
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Installatsiooni pool: esisild mõlemapoolselt
- Laius (mm): 37
- Siseläbimõõt [mm]: 43
- Välisläbimõõt [mm]: 82
- Manufacturer: JPN
- Guarantee: 4 years guarantee
- Weight [kg]: 1.87
- Bolt Hole Circle Ø 1 [mm]: 112
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 29SKV438
Fitting Position: Front Axle both sides, Rear Axle both sides, Front Axle, Rear Axle
- Construction Year to: 12.1988
-
Vehicle Identification Number (VIN) to: 44-
F- 300 000, 44- G- 031 043 -
Fitting Position: Front Axle,
Rear Axle -
Alternative Repair Kit: 300 334 1102/
S - Inner Diameter [mm]: 42
- Outer Diameter [mm]: 75
- Height [mm]: 37
- Bearing Type: Ball Bearing
- Manufacturer: MEYLE
- Fitting Position: Rear Axle
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Quality class: PJ
- Name: Wheel bearing kit
- Fitting Position: Rear Axle
-
Vehicle Identification Number (VIN) from: 44-
J- 200100 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Inner Diameter 1 [mm]: 45
- Manufacturer: OPTIMAL
- Fitting Position: Front Axle both sides
- Weight [kg]: 0.765
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 8.2
- Packaging width [cm]: 8.2
- Packaging height [cm]: 3.7
- Manufacturer: FEBEST
- Fitting Position: Front Axle
- Width [mm]: 37
- Weight [kg]: 0.84
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Manufacturer: METALCAUCHO
- Outer Diameter [mm]: 82
- Quantity Unit: Set
- Inner Diameter [mm]: 43
- Fitting Position: Front Axle
- Weight [kg]: 0.694
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Fitting Position: Rear Axle Left,
Rear Axle Right - Trim Level: FRRE LR+RE
- Inner Diameter [mm]: 43
- Width 1 [mm]: 37
- Number of mounting bores: 1
- Name: DA KWD1060
- Manufacturer: DAYCO
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Bearing Type: Angular Ball Bearing
-
Fitting Position: Front Axle Left,
Front Axle Right - Weight [kg]: 1.036
-
Supplementary Article/Info 2: with bolts/
screws, with nut - Supplementary Article/Supplementary Info: with motor shaft screw
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
-
Vehicle Identification Number (VIN) from: 44-
J- 200100 - Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Inner Diameter 2 [mm]: 45
- Manufacturer: OPTIMAL
- Fitting Position: Rear Axle
- Weight [kg]: 0.965
- Supplementary Article/Info 2: without wheel hub
- Packaging length [cm]: 11.2
- Packaging width [cm]: 8.6
- Packaging height [cm]: 3.8
- Manufacturer: FEBEST
-
Fitting Position: Front Axle Left,
Front Axle Right - Inner Diameter 1 [mm]: 43
- Inner Diameter 2 [mm]: 45
- Weight [kg]: 0.84
- Outer Diameter 1 [mm]: 82
- Width 1 [mm]: 37
- Manufacturer: A.B.S.
-
Fitting Position: Right,
Rear Axle - Manufacturer: SNR
- Name: SN R157.14
- Fitting Position: Front Axle
- Required quantity: 2
- Width [mm]: 37
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Manufacturer: SKF
- Name: SK VKBA1356
- Fitting Position: Front Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 37
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713610030
- Lisainfo: 713 6100 30 FAG
- Additional information: 713 6100 30 FAG
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 37
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
-
Fitting Position: Right,
Front Axle - Manufacturer: SNR
- Name: SN R157.18
- Fitting Position: Rear Axle
- Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
- Inner Diameter [mm]: 43
- Outer Diameter [mm]: 82
- Width [mm]: 37
- SVHC: No SVHC present!
- Manufacturer: FAG
- Name: LU 713610090
- Construction Year to: 11.1990
-
Fitting Position: Rear Axle,
Front Axle - Required quantity: 2
- Block Separation:
- Weight [kg]: 1.056
- Packaging length [cm]: 10.9
- Packaging width [cm]: 8.4
- Packaging height [cm]: 10.9
- Outer Diameter [mm]: 82
- Inner Diameter [mm]: 43
- Width [mm]: 37
-
Manufacturer: CONTITECH-
LOÅ»YSKA KÃÅ
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks