• Kõrgus (mm): 14,7
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 50,3
• Installatsiooni pool: Esisild
• Kaal (kg): 0,11
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• alternatiivne remondikomplekt: 100 598 0101, 100 598 0101/SK
• Installatsiooni pool: Tagasild, sees
• Siseläbimõõt [mm]: 29
• Välisläbimõõt [mm]: 50
• Kõrgus (mm): 14,73
• Laagriteostus: koonusrulllaager
• Name: RATTALAAGER
• Manufacturer: MEY

• Piirangutega toode/piirangu info 2: ilma rattakeskmeta
• Installatsiooni pool: Tagasild, esisild vasakul, esisild paremal
• Seerianumber: KLP-AU-002
• Manufacturer: NTY
• Name: NTY KLP-AU-002

• Fitting Position: Rear Axle
• Installatsiooni pool: Esisild
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Siseläbimõõt 1 [mm]: 39
• Siseläbimõõt 2 (mm): 41
• Välisläbimõõt [mm]: 75
• Kõrgus (mm): 37
• Manufacturer: JP GROUP

Lisainfo: Wheel bearing kit, for one front wheel, with combi screw Additional information: Wheel bearing kit, for one front wheel, with combi screw

• Fitting Position: Rear Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt 1 [mm]: 75
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Laius 1 (mm): 37
• Välisläbimõõt 1 [mm]: 75
• Siseläbimõõt 1 [mm]: 39
• Siseläbimõõt 2 (mm): 41
• Manufacturer: GSP

• Fitting Position: Front Axle
• Installatsiooni pool: Tagasild
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Name: Rattalaagrikomplekt
• Manufacturer: MAX

• Fitting Position: Rear Axle Left, Rear Axle Right
• Siseläbimõõt 1 [mm]: 39
• Siseläbimõõt 2 (mm): 41
• Kaal (kg): 0,7
• Välisläbimõõt 1 [mm]: 75
• Laius 1 (mm): 37
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Front Axle Left, Front Axle Right
• Laius 1 (mm): 37
• Välisläbimõõt 1 [mm]: 82
• Siseläbimõõt 1 [mm]: 43
• Siseläbimõõt 2 (mm): 45
• Manufacturer: GSP

• Installatsiooni pool: Esisild
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laagriteostus: Kuullaager
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 37
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Quality class: PJ
• Name: Wheel bearing kit

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Välisläbimõõt [mm]: 75
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Trim Level: FRRE LR+RE
• Siseläbimõõt [mm]: 39
• Laius 1 (mm): 37
• Kinnitusaukude hulk: 1
• Name: DA KWD1058
• Manufacturer: DAYCO

• Installatsiooni pool: Esisild
• Laius (mm): 37
• Välisläbimõõt [mm]: 82
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Installatsiooni pool: Esisild
• Välisläbimõõt [mm]: 82
• Kõrgus (mm): 37
• Siseläbimõõt [mm]: 43
• Kaal (kg): 0,768
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Width [mm]: 37
• Weight [kg]: 0.68
• Inner Diameter [mm]: 39
• Outer Diameter [mm]: 75
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt 1 [mm]: 82
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Rear Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Piirangutega toode/piirangu info 2: koos kruviga
• Siseläbimõõt 2 (mm): 41
• Manufacturer: OPTIMAL

• Fitting Position: Rear Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Piirangutega toode/piirangu info 2: koos kinnitusmaterjaliga
• Siseläbimõõt 2 (mm): 41
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT
• Additional information: F100090
• Lisainfo: F100090

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt 1 [mm]: 39
• Siseläbimõõt 2 (mm): 41
• Välisläbimõõt [mm]: 75
• Kõrgus (mm): 37
• Laagriteostus: Kuullaager
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Quality class: PJ
• Name: Wheel bearing kit

• Model Year to: 1995
• Installatsiooni pool: esisild mõlemapoolselt
• Kaal (kg): 0,627
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• pakendi pikkus [cm]: 7,5
• pakendi laius [cm]: 7,5
• pakendi kõrgus [cm]: 3,7
• Manufacturer: FEBEST

• Fitting Position: Rear Axle
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Laagriteostus: kuullaager
• Kaal (kg): 1,068
• Piirangutega toode/piirangu info: ajamivõlli kruvidega, mutritega
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 37
• Weight [kg]: 0.84
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: METALCAUCHO

• Välisläbimõõt [mm]: 82
• Hulgaühik: Komplekt
• Siseläbimõõt [mm]: 43
• Installatsiooni pool: Esisild
• Kaal (kg): 0,694
• Manufacturer: VAICO

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Required quantity: 2
• Kaal (kg): 0,966
• pakendi pikkus [cm]: 11
• pakendi laius [cm]: 9
• pakendi kõrgus [cm]: 6
• Välisläbimõõt [mm]: 75
• Siseläbimõõt [mm]: 39
• Laius (mm): 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• Siseläbimõõt [mm]: 43
• Laius 1 (mm): 37
• Kinnitusaukude hulk: 1
• Name: DA KWD1060
• Manufacturer: DAYCO

• Fitting Position: Rear Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Laius (mm): 37
• SVHC: SVHS aineid ei esine
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Fitting Position: Front Axle
• alternatiivne remondikomplekt: 100 498 0037
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Kõrgus (mm): 37
• Laagriteostus: Kuullaager
• Name: RATTALAAGER
• Manufacturer: MEY

• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laagriteostus: kuullaager
• Installatsiooni pool: esisild vasakul, esisild paremal
• Kaal (kg): 0,65
• Piirangutega toode/piirangu info: ajamivõlli kruvidega, mutritega
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Materjal, äärik: NBR (Nitril-Butadien-Kautschuk)
• Laagriteostus: kuullaager
• Installatsiooni pool: Tagasild vasakul, Tagasild paremal
• Kaal (kg): 0,806
• Manufacturer: FEBI

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• Laius (mm): 37
• Siseläbimõõt [mm]: 39
• Välisläbimõõt [mm]: 75
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Installatsiooni pool: Esisild
• Piirangutega toode/piirangu info: koos paigaldus-/kinnitusmaterjaliga
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Kõrgus (mm): 37
• Laagriteostus: Kuullaager
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

Üldine informatsioon: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Front Axle Left, Front Axle Right
• Siseläbimõõt 1 [mm]: 43
• Siseläbimõõt 2 (mm): 45
• Kaal (kg): 0,84
• Välisläbimõõt 1 [mm]: 82
• Laius 1 (mm): 37
• Manufacturer: A.B.S.

• Fitting Position: Right, Left, Rear Axle
• Laius 1 (mm): 37
• Siseläbimõõt 1 [mm]: 39
• Välisläbimõõt 1 [mm]: 75
• Manufacturer: SNR
• Name: SN R157.08

• Fitting Position: Right, Left, Front Axle
• Name: SN R157.11
• Manufacturer: NTN-SNR

• Fitting Position: Front Axle
• Required quantity: 2
• Laius (mm): 37
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 37
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Required quantity: 2
• Kaal (kg): 1,056
• pakendi pikkus [cm]: 10,9
• pakendi laius [cm]: 8,4
• pakendi kõrgus [cm]: 10,9
• Välisläbimõõt [mm]: 82
• Siseläbimõõt [mm]: 43
• Laius (mm): 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Front Axle
• Piirangutega toode/piirangu info: Foto vastab tarnekomplektile
• Siseläbimõõt [mm]: 43
• Välisläbimõõt [mm]: 82
• Laius (mm): 37
• SVHC: SVHS aineid ei esine
• Manufacturer: FAG