• Pistikkontaktide arv: 2
• Värv: sinine
• Manufacturer: JP GROUP A/S
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Pistikkontaktide arv: 2
• Värv: valge
• Väliskeere [mm]: M10x1
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Pistikkontaktide arv: 1
• Keermemõõt: M10x1 mm
• Võtmekaugus: 13 mm
• OE-numbri jaoks: 049919563B
• Manufacturer: KAMOKA
• Additional information: 4080049 KAMOKA
• Lisainfo: 4080049 KAMOKA

• Korpusevärv: valge
• Võtmekaugus: 19
• OE-numbri jaoks: 26906161
• Manufacturer: KAMOKA

• Korpusevärv: sinine
• OE-numbri jaoks: 025906041A
• Manufacturer: KAMOKA

• Keermemõõt: M10 x 1
• Võtmekaugus: 14
• Piirangutega toode/piirangu info: koos tihendiga
• Pistikkontaktide arv: 1
• Värvimarkeering: sinine
• Kaal (kg): 0,019
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.05
• Always compare old and new part (in particular OE No.):
• Name: CE 17SKV555
• Manufacturer: ESEN SKV

Transmission Type: 4-Speed Manual Transmission, 5-Speed Manual Transmission, 4-Speed Automatic Transmission

• Number of pins: 2
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Kasutuspinge [V]: 12
• Anduritüüp: passiivne andur
• Lüliti funktsioon: Reed-lüliti
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikkontaktide arv: 2
• Lisainfo: Distance sensor
• Additional information: Distance sensor

• Värv: valge
• Pistikkontaktide arv: 2
• Keermemõõt: M10 x 1
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Fitting Position: Front Axle
• Quantity: 1
• Vehicle Identification Number (VIN) from: 8B-N-000 001
• Vehicle Identification Number (VIN) to: 8B-M-040 000
• General Information: distance sensor
• Manufacturer: VIKA

• Värv: sinine
• Pistikkontaktide arv: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Connecting thread: M10 x 1
• Manufacturer: ERA

• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year from: 06.1989
• Keermemõõt: M10x1.0
• Manufacturer: VERNET

• Engine Code: 3A
• Number of pins: 1
• Colour: blue
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: blue
• Name: ANDUR,OLITEMPERATUUR
• Manufacturer: EPS

• Anduritüüp: NTC-andur
• Montaaživiis: kruvitud
• Pistikukatte kuju: ristkülik
• Pistikkontaktide arv: 2
• Pistiku värv: valge
• Võtmekaugus: 19
• Keermemõõt: M10x1
• OE-numbri jaoks: 026906161
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Ühenduste arv: 2
• Värv: sinine
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 2
• Colour: black
• Material: Plastic
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Ühenduste arv: 2
• Värv: sinine
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: koos tihendiga, hoidevedruga
• Name: SW 30 93 4762
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Equipment: for vehicles with automatic climate control
• Anduritüüp: NTC-andur
• Värv: sinine
• Pistikkontaktide arv: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Pikkus (mm): 37
• Kaal (kg): 0,02
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• OE-numbri jaoks: 025 906 041 A
• Piirangutega toode/piirangu info: koos tihendiga
• Värvimarkeering: sinine
• Pistikkontaktide arv: 2
• Manufacturer: VEMO GERMANY

Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Väliskeerme mõõde: M10 x 1
• Ühenduste arv: 1
• Kaal (kg): 0,01
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M20
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• Engine Code: 3A
• Number of pins: 2
• Colour: white
• Thread Size: M10x1
• Spanner Size: 19
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• for model code: (+) Regulated Cat.
• Korpusevärv: valge
• Pistikkontaktide arv: 2
• Keermemõõt: M10X1-6g
• Võtmekaugus: 19
• Manufacturer: DELPHI
• Name: DE TS10251

• Engine Code: 3A
• Number of pins: 2
• Colour: white
• Keermemõõt: M10x1
• Võtmekaugus: 19
• Manufacturer: FACET

• Väliskeerme mõõde: M10 x 1
• Ühenduste arv: 1
• Kaal (kg): 0,01
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Name: SW 30 93 3825
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Keermemõõt: M10x1.0
• Manufacturer: VERNET

• Väliskeerme mõõde: M10 x 1
• Ühenduste arv: 2
• Värv: valge
• Kaal (kg): 0,025
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• General Information: speedometer
• Manufacturer: VIKA

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,015
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Housing Colour: white
• Thread Size: M10 x 1,0
• Number of pins: 2
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range [°C]: 25, 80
• Power [W]: 0.06
• Manufacturer: METZGER

• Catalytic Converter Type: with three-way catalytic converter
• Anduritüüp: NTC-andur
• Keermemõõt: M10x1,0
• Võtmekaugus: 19
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Värv: valge
• Pistikkontaktide arv: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Ühenduste arv: 2
• Värvimarkeering: hall
• Kruvipikkus kruvipea all [mm]: 20
• Kaal (kg): 0,03
• Piirangutega toode/piirangu info: hoidevedruga, koos tihendiga
• Name: SW 30 92 9318
• Manufacturer: SWAG

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 4-Speed Automatic Transmission
• Pistikkontaktide arv: 2
• Name: ANDUR,KIIRUS
• Manufacturer: MAX
• Lisainfo: 095927321C/MG
• Additional information: 095927321C/MG

• Quantity: 1
• General Information: interior temperature sensor
• Manufacturer: BORSEHUNG

• Thread Size: M10 x 1
• Temperature range to [°C]: 110
• Manufacturer: ERA

• Pistikkontaktide arv: 3
• Name: ANDUR,SššTEIMPULSS
• Manufacturer: MAX
• Lisainfo: 030905065/MG
• Additional information: 030905065/MG

• Pistikkontaktide arv: 2
• Kaal (kg): 0,02
• Manufacturer: VEMO

Transmission Type: 4-Speed Manual Transmission, 5-Speed Manual Transmission, 4-Speed Automatic Transmission Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: white
• Manufacturer: BOSCH

• Number of pins: 2
• Fitting Position: outer
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Transmission Type: 4-Speed Automatic Transmission
• Ühenduste arv: 2
• Kaal (kg): 0,018
• Piirangutega toode/piirangu info 2: koos rõngastihendiga
• Manufacturer: FEBI BILSTEIN

Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistiku kesta tüüp: Pistikuhülsi korpus
• Tootja piirang: Alfa Romeo, Fiat, VAG
• Pistikkontaktide arv: 2
• Kaablipikkus (mm): 250
• Kaabli ristlõige [mm²]: 1
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• juhtmeisolatsiooni materjal: Silikoon
• SVHC: SVHS aineid ei esine
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Pistiku kesta tüüp: Pistikuhülsi korpus
• Tootja piirang: BMW, Volvo, VAG
• Pistikkontaktide arv: 3
• Kaablipikkus (mm): 250
• Kaabli ristlõige [mm²]: 1
• Piirangutega toode/piirangu info: Pistikuhülsi korpusega, koos tihenditega
• Piirangutega toode/piirangu info 2: koos ühendusega
• temperatuurivahemik alates [°C]: −25
• Temperatuurivahemik kuni [°C]: +140
• juhtmeisolatsiooni materjal: Silikoon
• SVHC: SVHS aineid ei esine
• Manufacturer: HBE

Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul

• Keermemõõt: M10x1
• Manufacturer: FAE

• Thread Size: M10X1
• Shifting Points [bar]: 0.3
• Working pressure to [bar]: 5
• Manufacturer: METZGER

• Name: ANDUR, VŽNTVOLL
• Manufacturer: BOS