Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Number of pins: 2
- Colour: blue
- Manufacturer: JP GROUP
-
Lisainfo: Temperature sensor for cooling system,
2 pins -
Additional information: Temperature sensor for cooling system,
2 pins
- Vehicle Equipment: for vehicles with air conditioning
- Number of pins: 3
- Switch Point [°C]: 118
- Colour: brown
-
Lisainfo: Thermo switch for cooling system 118 C,
M14x1.5 -
Additional information: Thermo switch for cooling system 118 C,
M14x1.5
- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - Manufacturer: JP GROUP
- Lisainfo: Sender for oil temperature
- Additional information: Sender for oil temperature
- for OE number: 025906041A
- Housing Colour: blue
- Manufacturer: KAMOKA
- Number of pins: 2
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Operating voltage [V]: 12
- Sensor Type: Passive sensor
- Combi Switch Function: Reed Contact
- Supplementary Article/Info 2: without cable
- Number of pins: 2
- Manufacturer: JP GROUP
- Lisainfo: Distance sensor
- Additional information: Distance sensor
- Sensor Type: NTC Sensor
- Mounting Type: Bolted
- Connector Shape: round
- Number of pins: 1
- Spanner Size: 14
- Thread Size: M10x1
- for OE number: 027919501
- Supplementary Article/Info 2: with seal ring
- Manufacturer: NRF
- Sensor Type: NTC Sensor
- Thread Size: M10x1
- Colour: white
- Number of pins: 2
-
Temperature range from [°C]: -
40 - Temperature range to [°C]: 150
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Number of pins: 2
- Guarantee: 3 years guarantee
- Weight [kg]: 0.05
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Name: CE 17SKV555
Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission
- Engine Code: KV
- Number of pins: 1
- Thread Size: M10x1
- Spanner Size: 13
- Manufacturer: FACET
- Fitting Position: Front Axle
- Quantity: 1
-
Vehicle Identification Number (VIN) from: 8B-
N- 000 001 -
Vehicle Identification Number (VIN) to: 8B-
M- 040 000 - General Information: distance sensor
- Manufacturer: VIKA
- Colour: blue
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MAX
- Engine Code: KV
- Number of pins: 1
- Thread Size: M10x1
- Spanner Size: 13
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: EPS
- Thread Size: M10x1.0
- Manufacturer: VERNET
- Supplementary Article/Info 2: with seal ring
- Number of pins: 2
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Vehicle Equipment: for vehicles with automatic climate control
- Sensor Type: NTC Sensor
- Colour: blue
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Number of connectors: 2
- Colour: blue
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with retaining spring,
with gasket/ seal - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: black
- Number of pins: 1
- Weight [kg]: 0.3
- Packaging length [cm]: 12
- Packaging width [cm]: 8
- Packaging height [cm]: 6
- Number of pins: 2
- Colour: black
- Material: Plastic
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Colour: black
- Housing Colour: black
- Number of pins: 1
- Thread Size: M10X1
- Spanner Size: 14
- Name: DE TS10256
- Manufacturer: DELPHI
- Number of connectors: 2
- Colour: blue
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 93 4762
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Length [mm]: 37
- Weight [kg]: 0.02
- Supplementary Article/Info 2: with seal ring
- for OE number: 025 906 041 A
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour Coding: blue
- Number of pins: 2
- Manufacturer: VEMO GERMANY
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Thread Size: M20
- Number of pins: 2
- Connector Shape: rectangular
- Manufacturer: ERA
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.03
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring - Name: SW 30 92 9318
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Number of connectors: 2
- Colour Coding: grey
- Screw length below head [mm]: 20
- Weight [kg]: 0.015
-
Supplementary Article/Supplementary Info: with gasket/
seal, with retaining spring -
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Sensor Type: NTC Sensor
-
Thread Size: M10x1,
0 - Supplementary Article/Info 2: with seal ring
- Colour: white
- Number of pins: 2
-
Name: ANDUR,
JAHUTUSVEDELIKU TEMP. - Manufacturer: MEY
- Quantity: 1
- General Information: interior temperature sensor
- Manufacturer: BORSEHUNG
- Number of pins: 2
- Weight [kg]: 0.02
- Manufacturer: VEMO
Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Plug housing design: Plug sleeve housing
-
Manufacturer Restriction: Alfa Romeo,
Fiat, VAG - Number of pins: 2
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur
- Vehicle Equipment: for vehicles with automatic climate control
- Fitting Position: outer
- Supplementary Article/Info 2: with cable
- Number of pins: 2
- Manufacturer: METZGER
- Plug housing design: Plug sleeve housing
-
Manufacturer Restriction: BMW,
Volvo, VAG - Number of pins: 3
- Cable Length [mm]: 250
- Cable Cross Section [mm²]: 1
-
Supplementary Article/Supplementary Info: with socket housing,
with gaskets/ seals - Supplementary Article/Info 2: with pipe
-
Temperature range from [°C]: -
25 - Temperature range to [°C]: +140
- Cable insulation material: Silicone
- SVHC: No SVHC present!
- Manufacturer: HBE
Name: Kaabliparanduskomplekt, seadeelement- tulede ulatuse regul
- Thread Size: M10x1
- Manufacturer: FAE
- Thread Size: M10X1
- Shifting Points [bar]: 0.3
- Working pressure to [bar]: 5
- Manufacturer: METZGER
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks