Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Construction Year: 01.1995
-
Vehicle Identification Number (VIN) to: 8D-
S- 130 000 - Quantity per packing unit: 2
-
Thread Size: M26x1,
50 - Manufacturer: 3RG
- Material: Aluminium
- Model Year from: 1994
- Assy./disassy. by qualified personnel required!:
- Manufacturer: ABAKUS
-
Additional information: 100-
00- 103 -
Lisainfo: 100-
00- 103
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Length [mm]: 310
- Width [mm]: 467
- Height [mm]: 55
- Section: Lower Section
-
Supplementary Article/Supplementary Info: with oil drain plug,
without gasket/ seal -
Fabrication Number: BMO-
VW- 028 - Manufacturer: NTY
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
-
Vehicle Identification Number (VIN) from: 8D-
V- 205001 -
Vehicle Identification Number (VIN) to: 8D-
X- 281733 - Material: Aluminium
- Supplementary Article/Supplementary Info: with oil drain plug
- Name: OLIVANN
- Manufacturer: MAX
-
Vehicle Identification Number (VIN) from: 8D-
V- 205 001 -
Vehicle Identification Number (VIN) to: 8D-
X- 281 733 - Guarantee: 3 years guarantee
- Weight [kg]: 1.88
- Always compare old and new part (in particular OE No.):
- Name: CE 48SKV879
- Manufacturer: ESEN SKV
- Construction Year to: 07.1997
- Material: Aluminium
- Section: Lower Section
- Manufacturer: JP GROUP
-
Lisainfo: Oil sump,
lower part -
Additional information: Oil sump,
lower part
- Supplementary Article/Info 2: without bore for oil level sensor
-
Fabrication Number: BMO-
AU- 003 - Manufacturer: NTY
-
Name: NTY BMO-
AU- 003
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- for OE number: 078 103 604 H
- Length [mm]: 440
- Height [mm]: 55
- Section: Lower Section
- Supplementary Article/Supplementary Info: with oil drain plug
- Supplementary Article/Info 2: without bore for oil level sensor
-
Fabrication Number: BMO-
AU- 012 - Manufacturer: NTY
-
Lisainfo: AUDI 80/
A4/ A6/ A8 (1994- 2002) -
Additional information: AUDI 80/
A4/ A6/ A8 (1994- 2002)
- Vehicle Identification Number (VIN) from: ******8D*V*205001
- Vehicle Identification Number (VIN) to: ******8D*X*281733
- Weight [kg]: 1.4
- Oil Sump Material: Aluminium
- Supplementary Article/Info 2: without bore for oil level sensor
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Width [mm]: 467
-
Supplementary Article/Supplementary Info: with oil drain plug,
without gasket/ seal - Surface: Powder coated
- Observe the vehicle manufacturer specifications:
- Height [mm]: 55
- Oil Sump Material: Sheet Steel
-
Transmission Type: 5-
Speed Automatic Transmission - Length [mm]: 310
-
Supplementary Article/Info 2: with seal ring,
without oil sump gasket - Observe system fill quantity:
- Section: Lower Section
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Vehicle Identification Number (VIN) from: 8D-
V- 205 001 -
Vehicle Identification Number (VIN) to: 8D-
X- 281 733 - Section: Lower Section
- Observe the vehicle manufacturer specifications:
- Length [mm]: 440
- Height [mm]: 50
- Fitting Position: Oil Sump
- Supplementary Article/Info 2: without bore for oil level sensor
- Observe system fill quantity:
- Width [mm]: 270
- Oil Sump Material: Aluminium
-
Supplementary Article/Supplementary Info: without gasket/
seal, with oil drain plug - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Fitting Position: Lower
- Material: Aluminium
- General Information: Oil sump; lower part; aluminum
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) to: 8D-
V- 205000 - Material: Aluminium
- Supplementary Article/Info 2: without bore for oil level sensor
- Section: Lower Section
- Manufacturer: AIC
General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- for OE number: 078 103 603 AM
- Section: Upper section
- Supplementary Article/Supplementary Info: without oil drain plug
-
Fabrication Number: BMO-
AU- 004 - Manufacturer: NTY
-
Name: NTY BMO-
AU- 004
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks