• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Fabrication Number: ESL-SK-000
• Manufacturer: NTY
• Name: NTY ESL-SK-000

• Oxygen Sensor: Switching-type Oxygen Sensor, Thread pre-greased
• Fabrication Number: ESL-UV-001
• Manufacturer: NTY
• Name: NTY ESL-UV-001

• Oxygen Sensor: Regulating Sensor, Thread pre-greased
• Fitting Position: before catalytic converter
• Fabrication Number: ESL-AU-003
• Manufacturer: NTY

• Engine Code: ACK, ALG
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 355
• Number of pins: 4
• Lisainfo: Lambda Sensor
• Additional information: Lambda Sensor

• Engine Code: AMX, APR, AQD
• Oxygen Sensor: Diagnostic Probe
• Number of circuits: 4
• Lisainfo: Lambda sensor
• Additional information: Lambda sensor

• Engine Code: AQD, APR, AMX, ALG, ACK
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• Number of pins: 4
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Regulating Sensor
• Number of circuits: 4
• Manufacturer: KAMOKA

• Number of pins: 4
• Oxygen Sensor: Heated
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Oxygen Sensor: Switching-type Oxygen Sensor
• Guarantee: 3 years guarantee
• Weight [kg]: 0.12
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV121

• Engine Code: ACK, ALG
• Construction Year to: 07.1998
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Manufacturer: ENERGY

• Engine Code: AMX, APR, AQD
• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Oxygen Sensor: Regulating Sensor, Heated
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Name: Lambda andur
• Manufacturer: MAX

• Engine Code: AMX, APR, AQD
• Construction Year from: 07.1999, 02.1999
• Construction Year to: 10.2000
• Oxygen Sensor: Diagnostic Probe, Regulating Sensor, Heated
• Block Separation:
• Number of circuits: 4
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: MAX
• Lisainfo: MGS-615
• Additional information: MGS-615

Fitting Position: Left, Right, before catalytic converter, after catalytic converter

• Construction Year to: 12.1999
• Oxygen Sensor: Regulating Sensor, Planar Sensor, Heated
• Engine Code: ACK, ALG
• Cable Length [mm]: 620
• Name: LAMBDA ANDUR
• Manufacturer: DLP
• Quality class: PJ

Additional information: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)" Lisainfo: "Tootja: DELPHI
A6 AVANT (4B, C5), 1
(kvaliteediklass: PJ)"

• Oxygen Sensor: Diagnostic Probe
• Engine Code: AMX
• Construction Year from: 07.1999
• Construction Year to: 10.2000
• Voltage [V]: 12
• Length [mm]: 1,440
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV079

• Conductor Number: 4
• Length [mm]: 520
• Number of circuits: 4
• Resistor [Ohm]: 3.5
• Cable Length [mm]: 520
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Fitting Position: Left
• Construction Year from: 08.1997
• Engine Code: ACK
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Quality: OE
• Weight [g]: 103
• Gross Weight [g]: 147
• Manufacturer: DENSO
• Name: DN DOX-0114
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Finger-type Sensor, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
SCORPIO I SEDAN (GGE
(kvaliteediklass: Q)"

• Oxygen Sensor: Regulating Sensor
• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Exhaust System: before catalytic converter
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.11
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV100

• Oxygen Sensor: Diagnostic Probe
• Engine Code: AMX
• Construction Year from: 07.1999
• Construction Year to: 10.2000
• Voltage [V]: 12
• Length [mm]: 1,435
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.15
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV078
• Manufacturer: ESEN SKV

• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Length [mm]: 885
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.19
• Resistor [Ohm]: 2.1
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV599
• Manufacturer: ESEN SKV

• Oxygen Sensor: Switching-type Oxygen Sensor
• Cable Length [mm]: 290
• Alternatively:
• Supplementary Article/Info 2: without plug
• Number of circuits: 4
• Alternative Repair Kit: 570111
• Manufacturer: ERA

• Engine Code: ALG, ACK
• Oxygen Sensor: Regulating Sensor, Heated
• Model Year to: 1998
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 570
• Weight [kg]: 0.108
• Name: SW 33 10 3171
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 08.1997
• Construction Year to: 07.1998
• Exhaust System: Duplex (1 le./1 ri.)
• Oxygen Sensor: Regulating Sensor
• Length [mm]: 575
• Number of connectors: 4
• Manufacturer: VERNET

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 1,700
• General Information: Lambda sensor; 4 wire
• Manufacturer: VIKA

• Construction Year to: 07.1998
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Length [mm]: 570
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.13
• Resistor [Ohm]: 6
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY

• Engine Code: ACK, ALG
• Construction Year to: 07.1998
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Oxygen Sensor: Regulating Sensor
• Voltage [V]: 12
• Length [mm]: 630
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.16
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 09SKV616
• Manufacturer: ESEN SKV

• Oxygen Sensor: Heated
• Recommended change interval [km]: 160,000
• Number of pins: 4
• Overall Length [mm]: 1,700
• General Information: Lambda sensor; 4 wire
• Manufacturer: VIKA

• Length [mm]: 1,690
• Number of circuits: 4
• Conductor Number: 4
• Resistor [Ohm]: 9
• Cable Length [mm]: 1,690
• Oxygen Sensor: Heated
• Name: LAMBDA ANDUR
• Manufacturer: MAG

• Engine Code: AMX, APR, AQD
• Construction Year from: 02.1999, 07.1999
• Construction Year to: 10.2000
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Recommended change interval [km]: 160,000
• Connector/Clamp: Connector may need adjustment
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter

• Engine Code: ACK, ALG, AMX, APR, AQD
• Oxygen Sensor: Finger-type Sensor
• Thread Size: M18 x 1,5
• Cable Length [mm]: 570
• Number of pins: 4
• Fitting Position: before catalytic converter
• Name: Lambda andur
• Manufacturer: MEY

• Construction Year from: 07.1999
• Construction Year to: 10.2000
• Oxygen Sensor: Diagnostic Probe
• Voltage [V]: 12
• Length [mm]: 1,450
• Guarantee: 3 years guarantee
• Number of circuits: 4
• Weight [kg]: 0.21
• Resistor [Ohm]: 9
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 09SKV646

• Exhaust System: for pre-catalytic converter
• Engine Code: AMX, APR, AQD
• Cable Length [mm]: 620
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20160-12B1

• Fitting Position: Left
• Construction Year from: 07.1999
• Engine Code: AMX
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 750
• Number of pins: 4
• Manufacturer Restriction: DENSO
• Quality: OE
• Weight [g]: 93
• Gross Weight [g]: 140
• Manufacturer: DENSO
• Name: DN DOX-0150
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
(kvaliteediklass: Q)"

• Engine Code: AMX, AQD, APR
• Fitting Position: before catalytic converter
• Oxygen Sensor: Regulating Sensor, Heated
• External Thread Size: M18 x 1,5
• Spanner Size: 22
• Number of circuits: 4
• Cable Length [mm]: 1,700
• Weight [kg]: 0.15
• Name: SW 33 10 3156
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ACK, ALG
• Construction Year to: 07.1998
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 620
• Number of pins: 4
• Technical Information Number: Universal 77004
• Manufacturer: FAE

• Construction Year from: 08.1997
• Construction Year to: 07.1998
• Engine Code: ACK,ALG
• Fitting Position: before catalytic converter
• Oxygen Sensor: Planar Sensor, Thread pre-greased, Heated
• Number of pins: 4
• Cable Length [mm]: 570
• Thread Size: M18x1,5
• Switch Pressure [bar]: 4
• Connector Shape: oval
• Name: VA 368478
• Manufacturer: VALEO

• Fitting Position: Left, after catalytic converter
• Engine Code: AMX
• Construction Year from: 07.1999
• Oxygen Sensor: Diagnostic Probe
• Length [mm]: 1,440
• Technical Information Number: Universal 77015
• Socket colour: brown
• Manufacturer: FAE

• Engine Code: ACK, ALG
• Construction Year to: 07.1998
• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Number of circuits: 4
• Overall Length [mm]: 550
• Available as universal article as well, see article no.: 0258986507
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

• Oxygen Sensor: Regulating Sensor, Heated
• Engine Code: AMX, APR, AQD
• Construction Year from: 02.1999
• Construction Year to: 10.2000
• Length [mm]: 670
• Technical Information Number: Universal 77015
• Manufacturer: FAE

• Construction Year from: 08.1998
• Construction Year to: 12.1998
• Fitting Position: Left, after catalytic converter
• Engine Code: AMX
• Cable Length [mm]: 1,690
• Oxygen Sensor: Planar Sensor, Heated
• Manufacturer: DELPHI
• Name: DE ES20164-12B1

• Fitting Position: Left
• Construction Year from: 07.1999
• Engine Code: AMX
• Exhaust System: for pre-catalytic converter
• Thread Size: M18x1.5
• Cable Length [mm]: 620
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 078906265M
• Quality: OE
• Weight [g]: 154
• Gross Weight [g]: 187
• Manufacturer: DENSO
• Name: DN DOX-2010
• Quality class: Q

Oxygen Sensor: Regulating Sensor, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
PASSAT VARIANT (3B5)
(kvaliteediklass: Q)"

• Fitting Position: Left
• Construction Year from: 07.1999
• Engine Code: AMX
• Thread Size: M18x1.5
• Cable Length [mm]: 1,690
• Number of pins: 4
• Manufacturer Restriction: DENSO
• for OE number: 58906265
• Quality: OE
• Weight [g]: 160
• Gross Weight [g]: 193
• Manufacturer: DENSO

Oxygen Sensor: Diagnostic Probe, Heated, Planar Sensor, Thread pre-greased, Switching-type Oxygen Sensor Additional information: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)" Lisainfo: "Tootja: DENSO
A4 (8D2, B5), 11.94-
(kvaliteediklass: Q)"

• Engine Code: AMX
• Construction Year from: 07.1999
• Construction Year to: 10.2000
• Fitting Position: Left, after catalytic converter
• Oxygen Sensor: Diagnostic Probe, Thread pre-greased
• Line insulation design: with silicone-coated woven-fibre insulation
• Cable Length [mm]: 1,500
• Number of circuits: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Oxygen Sensor: Regulating Sensor
• Fitting Position: before catalytic converter
• Length [mm]: 1,700
• Number of pins: 4
• Supplementary Article/Info 2: with mounting manual
• Manufacturer: FAE

• Engine Code: AMX, APR, AQD
• Construction Year from: 02.1999, 07.1999
• Construction Year to: 10.2000
• Oxygen Sensor: Regulating Sensor, Diagnostic Probe
• Block Separation:
• Number of circuits: 4
• Overall Length [mm]: 1,700
• Available as universal article as well, see article no.: 0258986615
• Recommended change interval [km]: 160,000
• Name: LAMBDA ANDUR
• Manufacturer: BOS

Fitting Position: before catalytic converter, after catalytic converter