Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
-
Lülitusrõhk [bar]: 1,
4 - Ühenduste arv: 1
- Väliskeere [mm]: M10x1
- Värvimarkeering: must
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Lülituspunkt alates [bar]: 0,
15 -
Lülituspunkt kuni [bar]: 0,
35 - Värvimarkeering: sinine
- Ühenduste arv: 1
- Väliskeere [mm]: M10x1
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Engine Code: AML/
ARJ/ APS -
Vehicle Identification Number (VIN) from: 8D-
Y- 000 001 -
Lülituspunkt alates [bar]: 1,
2 -
Lülituspunkt kuni [bar]: 1,
6 - Värvimarkeering: must
- Ühenduste arv: 1
- Väliskeere [mm]: M10x1
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Vehicle Identification Number (VIN) to: 8D-
X- 500 000, 8D- 1- 200 000, 8D- X- 199 999 -
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - Keermemõõt: M10x1
- Pikkus (mm): 46
- Võtmekaugus: 24
- Pistikkontaktide arv: 1
- Värv: must
- Manufacturer: DELLO AUTOMEGA
- Keermemõõt: M10x1
- Pikkus (mm): 46
- Võtmekaugus: 24
- Värvimarkeering: valge
- Pistikkontaktide arv: 1
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - Keermemõõt: M10x1
- Värv: hall
- Pistikkontaktide arv: 1
- Võtmekaugus: 24
- Manufacturer: DELLO AUTOMEGA
Vehicle Identification Number (VIN) to: 8D-1-200 000, 8D-X-199 999, 8D-X-500 000, 8D-X-260 000
- Keermemõõt: M10x1
- Pikkus (mm): 46
- Võtmekaugus: 24
- Värv: sinine
- Pistikkontaktide arv: 1
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) to: 8D-
1- 200 000 -
Vehicle Identification Number (VIN) from: 8D-
X- 200 001, 8D- Y- 000 001 - Keermemõõt: M10X1
- Värv: must
- Pistikkontaktide arv: 1
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) from: 8D-
V- 054232 - Construction Year to: 06.1999
- Pistikute teostus: Lamepistik
- Rakendustüüp: hüdrauliline
- Värvimarkeering: must
- Keermemõõt: M 10
- Keerme samm (mm): 1
- Pistikkontaktide arv: 1
-
Lülitusulatus (bar): 1,
2 - 1, 6 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Engine Code: AML,
ARJ, APS -
Vehicle Identification Number (VIN) from: 8D-
Y- 000001 - Värv: must
- Pistikkontaktide arv: 1
- Keermemõõt: M10x1
-
Surve alates (bar): 1,
2 -
Surve (bar) kuni: 1,
6 - Name: OLISURVELLITUS
- Manufacturer: MAX
-
Lisainfo: 21-
0107 -
Additional information: 21-
0107
-
Lülituspunkt alates [bar]: 1,
4 -
Lülituspunkt kuni [bar]: 1,
6 -
Üldine informatsioon: oil pressure switch;1.4Bar-
1.6Bar - Manufacturer: VIKA
-
Lülituspunkt alates [bar]: 1,
6 - Lülituspunkt kuni [bar]: 2
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Pikkus (mm): 46
- Keermemõõt: M10x1
- Võtmekaugus: 24
- Värvimarkeering: must
-
Surve alates (bar): 1,
2 -
Surve (bar) kuni: 1,
5 - Läbimõõt [mm]: 3
- Name: OLISURVELLITUS
- Manufacturer: MAX
- Quantity: 1
-
Vehicle Identification Number (VIN) to: 8D-
X- 500 000 - Pealispind: tsingitud
-
Lülitusulatus (bar): 1,
2 - 1, 5 -
Kaal (kg): 0,
031 - vajaminev tükihulk: 1
- Väliskeere [mm]: M10 x 1
- Keermepikkus (mm): 13
-
Siseläbimõõt [mm]: 2,
54 - Võtmekaugus: 24
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Värvimarkeering: must
- Pikkus (mm): 46
- Üldine informatsioon: oil pressure switch
- Manufacturer: VIKA
- Construction Year from: 07.1999
-
Pistikukatte kuju: D-
kuju - Rakendustüüp: hüdrauliline
- Värvimarkeering: must
- Keermemõõt: M 10
- Keerme samm (mm): 1
- Pistikkontaktide arv: 1
-
Lülitusulatus (bar): 1,
2 - 1, 6 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Pikkus (mm): 46
- Võtmekaugus: 24
- Värvimarkeering: sinine
- Pistikkontaktide arv: 1
- Keermemõõt: M10x1
-
Surve alates (bar): 0,
15 -
Surve (bar) kuni: 0,
35 - Läbimõõt [mm]: 3
- Name: OLISURVELLITUS
- Manufacturer: MAX
- Construction Year from: 07.1999
-
Vehicle Identification Number (VIN) from: 8D-
Y- 000001 - Surve (bar): 16
- Korpusevärv: must
-
Keermemõõt: M10×1-
6g - Läbimõõt [mm]: 24
- Võtmekaugus: 24
- Pistikkontaktide arv: 1
- Manufacturer: DELPHI
- Name: DE SW90025
- Quality class: PJ
Additional information: "Tootja: DELPHI
(kvaliteediklass: PJ)"
Lisainfo: "Tootja: DELPHI
(kvaliteediklass: PJ)"
- Pikkus (mm): 46
-
Lülituspunkt alates [bar]: 0,
15 -
Lülituspunkt kuni [bar]: 0,
35 -
Siseläbimõõt [mm]: 2,
54 - Väliskeerme mõõde: M10 x 1
- Keermepikkus (mm): 13
- Võtmekaugus: 24
- Ühenduste arv: 1
- Värvimarkeering: sinine
- Pealispind: tsingitud
-
Kaal (kg): 0,
031 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: OLISURVELLITUS
- Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 46
- Keermemõõt: M10x1
- Võtmekaugus: 24
- Värvimarkeering: valge
- Pistikkontaktide arv: 1
-
Surve (bar): 1,
8 - Name: OLISURVELLITUS
- Manufacturer: MAX
-
Name: Rongastihend,
mootorioli tasemeandur - Manufacturer: MAX
-
Seerianumber: ECC-
AU- 005 -
Keermemõõt: M10x1,
0 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Pistikkontaktide arv: 1
- Pistiku värv: must
- Manufacturer: NTY
-
Name: NTY ECC-
AU- 005
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Pikkus (mm): 46
- Keermemõõt: M10x1
- Võtmekaugus: 24
- Värvimarkeering: hall
- Pistikkontaktide arv: 1
-
Surve alates (bar): 0,
75 -
Surve (bar) kuni: 1,
05 - Läbimõõt [mm]: 2
- Name: OLISURVELLITUS
- Manufacturer: MAX
- Pikkus (mm): 46
-
Lülituspunkt alates [bar]: 0,
15 -
Lülituspunkt kuni [bar]: 0,
35 -
Siseläbimõõt [mm]: 2,
54 - Väliskeerme mõõde: M10 x 1
- Keermepikkus (mm): 13
- Võtmekaugus: 24
- Ühenduste arv: 1
- Värvimarkeering: sinine
- Pealispind: tsingitud
-
Kaal (kg): 0,
031 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: SW 30 23 0002
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
-
Name: Rongastihend,
oli ravoolukruvi - Manufacturer: DRM
Lühiinformatsioon: Always compare old and new part (in particular OE No.)
-
Lülituspunkt alates [bar]: 0,
75 -
Lülituspunkt kuni [bar]: 1,
05 - Väliskeere [mm]: M10x1
- Ühenduste arv: 1
- Värvimarkeering: hall
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Lülituspunkt alates [bar]: 1,
6 - Pikkus (mm): 46
- Lülituspunkt kuni [bar]: 2
- Väliskeerme mõõde: M10 x 1
- Keermepikkus (mm): 13
- Võtmekaugus: 24
- Ühenduste arv: 1
- Värvimarkeering: valge
- Pealispind: tsingitud
-
Kaal (kg): 0,
03 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: OLISURVELLITUS
- Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AML,
ARJ, APS -
Lülituspunkt alates [bar]: 1,
2 -
Lülituspunkt kuni [bar]: 1,
6 - Väliskeerme mõõde: M10 x 1
- Ühenduste arv: 1
- Värv: must
-
Kaal (kg): 0,
031 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: OLISURVELLITUS
- Manufacturer: FEB
- Additional information: F18904
- Lisainfo: F18904
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 1
- Värv: hall
-
Surve (bar): 0,
9 - Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Required quantity: 1
- Värv: must
-
Surve (bar): 1,
4 - Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Required quantity: 1
- Keermemõõt: M 10x1
- Värv: pruun
- Võtmekaugus: 24
- Pistikkontaktide arv: 1
- Piirangutega toode/piirangu info 2: koos rõngastihendiga
-
Surve (bar): 0,
25 - Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Required quantity: 1
- Värv: sinine
-
Lülituspunktid [bar]: 0,
25 - Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Required quantity: 1
- Värv: valge
-
Surve (bar): 1,
8 - Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Construction Year to: 06.1999
-
Engine Code: ALF,
APS, ARJ, AGA - Vehicle Identification Number (VIN) to: 8DX500000
-
Lülitusrõhk [bar]: 1,
4 - Keermemõõt: M10x1.0
- Anduritüüp: lahtine anduri ehitusviis
- Name: OLISURVELLITUS
- Manufacturer: VER
- Vehicle Identification Number (VIN) from: 8DY000001
- Vastab originaalosa värvile: must
-
Surve (bar): 1,
4 - Keermemõõt: M 10 x 1
- OE-numbri jaoks: 06A919081J
- Manufacturer: MEAT & DORIA
-
Lülituspunkt alates [bar]: 1,
6 - Pikkus (mm): 46
- Lülituspunkt kuni [bar]: 2
- Väliskeerme mõõde: M10 x 1
- Keermepikkus (mm): 13
- Võtmekaugus: 24
- Ühenduste arv: 1
- Värvimarkeering: valge
- Pealispind: tsingitud
-
Kaal (kg): 0,
03 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: SW 30 23 0001
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Lülituspunkt alates [bar]: 1,
2 - Pikkus (mm): 46
-
Lülituspunkt kuni [bar]: 1,
5 -
Siseläbimõõt [mm]: 2,
54 - Väliskeerme mõõde: M10 x 1
- Keermepikkus (mm): 13
- Võtmekaugus: 24
- Ühenduste arv: 1
- Värvimarkeering: must
-
Lülituspunktid [bar]: 1,
2 - Pealispind: tsingitud
-
Kaal (kg): 0,
031 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: OLISURVELLITUS
- Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Surve (bar): 1,
4 - Keermemõõt: M10 x 1
- tehnilise informatsiooni number: circuit N.O.
- Manufacturer: ERA
- Model Year from: 1999
-
Vehicle Identification Number (VIN) from: 8D-
X- 200 001, 8D- V- 054 232 - Block Separation:
- for model year: 1997
-
Surve alates (bar): 1,
2 -
Surve (bar) kuni: 1,
6 - Lüliti funktsioon: Lukustaja
- Värv: must
- Võtmekaugus: 24
- Keermemõõt: M10 x 1
- Pistikkontaktide arv: 1
- Name: OLISURVELLITUS
- Manufacturer: MEY
- Lisainfo: 1009190014
- Additional information: 1009190014
- Piirangutega toode/piirangu info: koos tihendiga
-
Keermemõõt: M10x1,
0 -
Lülitusulatus (bar): 0,
15 - 0, 35 - Värv: sinine
-
Kaal (kg): 0,
038 - Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AML; APS; ARJ
- Keermemõõt: M10 x 1
- Võtmekaugus: 14
- Piirangutega toode/piirangu info: koos tihendiga
- Pistikkontaktide arv: 1
- Värvimarkeering: sinine
-
Kaal (kg): 0,
019 - Manufacturer: VEMO GERMANY
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Construction Year from: 08.1997
-
Engine Code: AGA/
ALF -
Pikkus (mm): 51,
2 -
Keermemõõt: M10x1,
0 - Piirangutega toode/piirangu info: koos tihendiga
-
Surve alates (bar): 0,
15 -
Surve (bar) kuni: 0,
35 -
Kaal (kg): 0,
039 - Manufacturer: VEMO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Surve (bar): 0,
25 - Keermemõõt: M10 x 1
- tehnilise informatsiooni number: circuit N.C.
- Manufacturer: ERA
- Construction Year to: 07.1999
-
Vehicle Identification Number (VIN) to: 8D-
X- 500000 - Surve (bar): 16
- Korpusevärv: must
-
Keermemõõt: M10×1-
6g - Läbimõõt [mm]: 24
- Võtmekaugus: 24
- Pistikkontaktide arv: 1
- Manufacturer: DELPHI
- Name: DE SW90005
- Lisainfo: SW90005
- Additional information: SW90005
-
Keermemõõt: M10x1,
0 - Värv: valge
-
Kaal (kg): 0,
033 -
Surve alates (bar): 1,
6 - Surve (bar) kuni: 2
- Manufacturer: VEMO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Engine Code: AGA,
ALF -
Surve (bar): 3,
5 - Korpusevärv: tumesinine
-
Keermemõõt: M10×1-
6g - Läbimõõt [mm]: 24
- Võtmekaugus: 24
- Pistikkontaktide arv: 1
- Name: OLISURVELLITUS
- Manufacturer: DLP
-
Lülituspunkt alates [bar]: 0,
75 - Pikkus (mm): 46
-
Lülituspunkt kuni [bar]: 1,
05 -
Siseläbimõõt [mm]: 2,
48 - Väliskeerme mõõde: M10 x 1
- Keermepikkus (mm): 13
- Võtmekaugus: 24
- Ühenduste arv: 1
- Värvimarkeering: hall
-
Lülituspunktid [bar]: 0,
7 - Pealispind: tsingitud
-
Kaal (kg): 0,
031 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: OLISURVELLITUS
- Manufacturer: FEB
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pikkus (mm): 46
-
Lülituspunkt alates [bar]: 1,
2 -
Lülituspunkt kuni [bar]: 1,
5 -
Siseläbimõõt [mm]: 2,
54 - Väliskeerme mõõde: M10 x 1
- Keermepikkus (mm): 13
- Võtmekaugus: 24
- Ühenduste arv: 1
- Värvimarkeering: must
-
Lülituspunktid [bar]: 1,
2 - Pealispind: tsingitud
-
Kaal (kg): 0,
031 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: SW 30 23 0003
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AML,
ARJ, APS -
Lülituspunkt alates [bar]: 1,
2 -
Lülituspunkt kuni [bar]: 1,
6 - Väliskeerme mõõde: M10 x 1
- Ühenduste arv: 1
- Värv: must
-
Kaal (kg): 0,
031 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: SW 30 91 8904
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Vehicle Identification Number (VIN) to: 8D-
X- 500000 - Keermemõõt: M 10x1
- Korpusevärv: must
-
Surve (bar): 1,
4 - Manufacturer: FAE
- Construction Year from: 07.1999
-
Engine Code: APS,
ARJ - Vehicle Identification Number (VIN) from: 8DY000001
-
Lülitusrõhk [bar]: 1,
4 - Keermemõõt: M10x1.0
- Anduritüüp: lahtine anduri ehitusviis
- Pistikute teostus: Ümarpistik
- Manufacturer: VERNET
-
Engine Code: AGA,
AGA/ ALF/ APS, ARJ - Construction Year to: 06.1999
- Vehicle Identification Number (VIN) to: 8D_X_500000
- Colour: black
- Pressure to [bar]: 1.6
- Pressure from [bar]: 1.2
-
Surve (bar): 1,
4 - Keermemõõt: M10x1
- Võtmekaugus: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
-
Engine Code: AGA,
AGA/ ALF/ APS, ARJ - Construction Year to: 06.1999
- Vehicle Identification Number (VIN) to: 8D_X_500000
- Colour: black
- Pressure to [bar]: 1.6
- Pressure from [bar]: 1.2
-
Surve (bar): 1,
4 - Keermemõõt: M10x1
- Võtmekaugus: 24
- Manufacturer: FACET
- Pikkus (mm): 46
-
Lülituspunkt alates [bar]: 0,
75 -
Lülituspunkt kuni [bar]: 1,
05 -
Siseläbimõõt [mm]: 2,
48 - Väliskeerme mõõde: M10 x 1
- Keermepikkus (mm): 13
- Võtmekaugus: 24
- Ühenduste arv: 1
- Värvimarkeering: hall
-
Lülituspunktid [bar]: 0,
7 - Pealispind: tsingitud
-
Kaal (kg): 0,
031 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: SW 30 23 0004
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: ALF,
AGA -
Lülitusrõhk [bar]: 0,
25 - Keermemõõt: M10x1.0
- Anduritüüp: kinnine anduri ehitusviis
- Manufacturer: VERNET
- Ühenduskeere: M10 x 1
- Manufacturer: ERA
- Engine Code: AGA
- Housing Colour: blue
- Temperature range to [°C]: 180
- Keermemõõt: M10x1
- Võtmekaugus: 13
- Vastab originaalosa värvile: sinine
-
Name: ANDUR,
OLITEMPERATUUR - Manufacturer: EPS
-
Vehicle Identification Number (VIN) from: 8D-
Y- 000001 - Keermemõõt: M 10x1
- Korpusevärv: must
-
Surve (bar): 1,
4 - Manufacturer: FAE
- Väändejõud alates [Nm]: 20
- Pinge [V]: 12
- Lüliti funktsioon: Lukustaja
-
Voolutugevus (A): 0,
25 - Tolerants (%): 15
- Keermemõõt: M10x1
- Võtmekaugus: 24
-
Surve alates (bar): 1,
2 -
Surve (bar) kuni: 1,
6 - Pistikkontaktide arv: 1
- Pistikute teostus: Lamepistik
- Vastab originaalosa värvile: must
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Name: HE 6ZL003259471
- Manufacturer: HELLA
-
Engine Code: APS,
APS/ ARJ - Construction Year from: 07.1999
- Vehicle Identification Number (VIN) from: 8D_Y_000001
- Colour: black
- Pressure to [bar]: 1.6
- Pressure from [bar]: 1.2
-
Surve (bar): 1,
4 - Keermemõõt: M10x1
- Võtmekaugus: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Engine Code: AGA
- Colour: blue
- Pressure to [bar]: 0.35
- Pressure from [bar]: 0.15
-
Surve (bar): 0,
3 - Keermemõõt: M10x1
- Võtmekaugus: 24
- Manufacturer: FACET
-
Engine Code: APS,
APS/ ARJ - Construction Year from: 07.1999
- Vehicle Identification Number (VIN) from: 8D_Y_000001
- Colour: black
- Pressure to [bar]: 1.6
- Pressure from [bar]: 1.2
-
Surve (bar): 1,
4 - Keermemõõt: M10x1
- Võtmekaugus: 24
- Manufacturer: FACET
- Engine Code: AGA
- Colour: blue
- Pressure to [bar]: 0.35
- Pressure from [bar]: 0.15
-
Surve (bar): 0,
3 - Keermemõõt: M10x1
- Võtmekaugus: 24
- Name: OLISURVELLITUS
- Manufacturer: EPS
- Construction Year from: 07.1999
- Vehicle Identification Number (VIN) from: 8D_Y_000001
-
Engine Code: APS,
ARJ - Väändejõud alates [Nm]: 20
- Pinge [V]: 12
- Lüliti funktsioon: Lukustaja
-
Voolutugevus (A): 0,
15 - Tolerants (%): 15
- Keermemõõt: M10x1
- Võtmekaugus: 24
-
Surve alates (bar): 1,
2 -
Surve (bar) kuni: 1,
6 - Pistikkontaktide arv: 1
- Vastab originaalosa värvile: must
- Monteerimist/demonteerimist peab tegema spetsialist!:
- Manufacturer: HELLA
-
Engine Code: AML,
ARJ, APS - Väliskeerme mõõde: M10 x 1
- Ühenduste arv: 1
-
Kaal (kg): 0,
01 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Engine Code: AML,
ARJ, APS - Väliskeerme mõõde: M10 x 1
- Ühenduste arv: 1
-
Kaal (kg): 0,
01 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Name: SW 30 93 3825
- Manufacturer: SWAG
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Pistikkontaktide arv: 1
- Pistikute teostus: Female
- Ülekandeliinide arv: 1
-
Materjal: CuSn
(vask- tina) - Kaablipikkus (mm): 250
-
Kaabli ristlõige alates [mm²]: 0,
75 -
Kaabli ristlõige kuni [mm²]: 0,
75 - juhtmeisolatsiooni materjal: Silikoon
-
Piirangutega toode/piirangu info: surve-
pressliidesega -
OE-numbri jaoks: 1J0973081,
1J0973701 - Manufacturer: METZGER
- Korpusetüüp: Alumiiniumkorpus
- Kõrgus (mm): 82
- Piirangutega toode/piirangu info: koos tihendiga
- Installatsiooni sügavus (mm): 54
-
Seerianumber: EPO-
AU- 000 - Manufacturer: NTY
-
Name: NTY EPO-
AU- 000
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Piirangutega toode/piirangu info: koos tihendiga
- Pistikkontaktide arv: 3
- Manufacturer: ABAKUS
Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Construction Year from: 08.1997
- Pinge [V]: 12
- Piirangutega toode/piirangu info: ilma trossideta
- Pistikkontaktide arv: 3
- Garantii: 3 aastat garantii
-
Kaal (kg): 0,
14 - Rakendustüüp: elektriline
- Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
- Name: CE 17SKV202
- Manufacturer: ESEN SKV
-
Engine Code: AML,
ARJ, APS -
Vehicle Identification Number (VIN) from: 8D-
X- 200001 - Pistikkontaktide arv: 3
-
Name: ANDUR,
MOOTORIOLITASE - Manufacturer: MAX
- Lisainfo: 1J0907660B
- Additional information: 1J0907660B
- Housing Colour: black
-
Vehicle Identification Number (VIN) from: 8D-
X- 320 001 - Observe technical data:
- Tootja piirang: VAG
-
Asetuslaius (mm): 1,
5 - Pistikkontaktide arv: 1
- Kaablipikkus (mm): 500
-
Kaabli ristlõige [mm²]: 0,
5 - Kokkupuutepind: tinutatud
-
Piirangutega toode/piirangu info: Pistikuhülsi korpusega,
koos tihenditega - Piirangutega toode/piirangu info 2: koos ühendusega
- juhtmeisolatsiooni materjal: Silikoon
- temperatuurivahemik alates [°C]: −25
- Temperatuurivahemik kuni [°C]: +140
- Pistiku kesta tüüp: Pistikuhülsi korpus
- SVHC: SVHS aineid ei esine
-
Name: Kaabliparanduskomplekt,
olisurvelliti - Manufacturer: HBE
- Pistikkontaktide arv: 3
- Manufacturer: YSPARTS
- Construction Year from: 02.1999
- Installatsiooni pool: Õlivann
- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Kinnitusaukude hulk: 3
- Korpusetüüp: Alumiiniumkorpus
-
Korpuse materjal: Plastik,
Polyamid 6.6 - Korpusevärv: must
-
OE-numbri jaoks: 1 119 169,
1J0 907 660B - jälgida süsteemi mahutavust:
- Manufacturer: TOPRAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Pistikkontaktide arv: 3
-
Pistikukatte kuju: D-
kuju - Kinnitusaukude hulk: 3
- Kõrgus (mm): 83
- Installatsiooni sügavus (mm): 52
- OE-numbri jaoks: 1J0907660B
-
Name: Andur,
Mootoriolitase - Manufacturer: MD
-
Engine Code: AML,
APS, ARJ -
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - Pistikkontaktide arv: 3
- Piirangutega toode/piirangu info: koos tihendiga
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Piirangutega toode/piirangu info: koos tihendiga
- Pistikkontaktide arv: 3
- Kinnitusaukude hulk: 3
- Manufacturer: ERA
-
Vehicle Identification Number (VIN) from: 8D-
X- 200 001 - valikuliselt:
- Piirangutega toode/piirangu info: koos tihendiga
- Pistikkontaktide arv: 3
-
Kaal (kg): 0,
1 - Manufacturer: VEMO
Üldine informatsioon: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: AGA
- Manufacturer Restriction: HELLA
-
Pikkus, mõõteandur [mm]: 63,
7 - Manufacturer: FACET
- Engine Code: AGA
- Manufacturer Restriction: HELLA
-
Pikkus, mõõteandur [mm]: 63,
7 - Manufacturer: EPS
- Construction Year from: 08.1997
- Piirangutega toode/piirangu info: koos tihendiga
- Pistikkontaktide arv: 3
- Monteerimist/demonteerimist peab tegema spetsialist!:
-
Name: ANDUR,
MOOTORIOLITASE - Manufacturer: HEL
Lühiinformatsioon: *** HELLA Electronics OE competence for over 60 years.
-
Engine Code: AML,
ARJ, APS - Vehicle Identification Number (VIN) from: ******8D*X*200001
- Ühenduste arv: 3
-
Kaal (kg): 0,
1 - Piirangutega toode/piirangu info 2: koos rõngastihendiga
- Manufacturer: FEBI BILSTEIN
Üldine informatsioon: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.