• Filter type: Spin-on Filter
• Height [mm]: 186.5
• Outer Diameter [mm]: 83
• Thread Size: M16X1,5
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Filter type: Spin-on Filter
• Height [mm]: 187
• Outer Diameter [mm]: 83
• Inner Diameter 1 [mm]: 62
• Inner Diameter 2 [mm]: 71
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 67.5
• Width [mm]: 88
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Lisainfo: Brake pad set, rear, 16.6 mm
• Additional information: Brake pad set, rear, 16.6 mm

• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 74
• Width [mm]: 156
• Thickness [mm]: 20.4
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 20.4 mm
• Additional information: Brake pad set, front, 20.4 mm

• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 74.1
• Width [mm]: 156
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear warning contact
• Lisainfo: Pistik ümmargune.Brake pad set, front, 19.8 mm
• Additional information: Pistik ümmargune.Brake pad set, front, 19.8 mm

• Fitting Position: Front Axle
• Brake System: Teves
• Height [mm]: 74
• Width [mm]: 156
• Thickness [mm]: 20.4
• Wear Warning Contact: with integrated wear warning contact
• Lisainfo: Pistik ovaalne,Brake pad set, front, 20.3 mm
• Additional information: Pistik ovaalne,Brake pad set, front, 20.3 mm

• Exit Thread Size: M 16 X 1.5
• Height [mm]: 180
• Outer Diameter [mm]: 86
• Inner Diameter 1 [mm]: 70
• Inner Diameter 2 [mm]: 77
• Filter type: Spin-on Filter
• Name: BM FE0789
• Manufacturer: BREMSI

• Filter type: In-Line Filter
• Thread Size 1: M16X1.5-6H
• Height [mm]: 186
• Outer Diameter 1 [mm]: 81
• Outer Diameter 2 [mm]: 85
• Manufacturer: DENCKERMANN FILTRY

• Diameter [mm]: 85
• Material: Plastic
• Filter type: Spin-on Filter
• Height [mm]: 154
• Manufacturer: DELPHI
• Name: DE HDF496

• Filter type: Spin-on Filter
• for OE number: 028127435A
• Manufacturer: DELLO AUTOMEGA

• Filter type: Spin-on Filter, with water drain screw
• Outer Diameter [mm]: 87
• Height [mm]: 182
• Supplementary Article/Supplementary Info: with gaskets/seals
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Height [mm]: 188
• Thread Size: M 16 X 1.5
• Outer Diameter [mm]: 85
• Filter type: Spin-on Filter
• Name: CFD DFF0216
• Manufacturer: DACO

• Filter type: Spin-on Filter
• Height [mm]: 187
• Outer Diameter [mm]: 83
• Outer Diameter 2 [mm]: 71
• Inner Diameter 2 [mm]: 62
• Exit Thread Size: M 16 X 1.5
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Height [mm]: 188
• Thread Size: M 16x1,5
• Outer Diameter [mm]: 85
• Manufacturer: JPN

• Filter type: Spin-on Filter
• for OE number: 13 32 2 245 006
• Height [mm]: 185
• Fuel Type: Diesel
• Outer Diameter [mm]: 85
• Sealing Ring Diameter [mm]: 70
• Manufacturer: KAMOKA

• Filter type: Spin-on Filter
• Diameter [mm]: 83
• Height [mm]: 182
• Entry Thread Size: M 16 x 1,5
• General Information: Diesel fuel filter
• Manufacturer: VIKA

• Filter type: Spin-on Filter
• Height [mm]: 183
• Thread Size: M16x1,5 mm
• Outer Diameter [mm]: 83
• Name: Fuel filter
• Quality class: PJ

Lisainfo: "Tootja: SRL
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
(kvaliteediklass: PJ)"

• Connecting thread: M16x1,5
• Diameter [mm]: 83
• Filter type: Spin-on Filter
• Height [mm]: 186.5
• Housing material: Metal
• Name: KšTUSEFILTER
• Manufacturer: MEY

• Filter type: Spin-on Filter
• Height [mm]: 169
• Outer Diameter [mm]: 84
• Internal Thread Size: M16 x 1,5
• Weight [kg]: 0.538
• Observe service information:
• Manufacturer: BLUEPRINT

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Height [mm]: 173
• Thread Size: Purge M10x1.5
• Diameter 3 [mm]: 62.5
• Diameter 4 [mm]: 70
• Fuel Type: Diesel
• Outer Diameter [mm]: 87
• Filter type: Spin-on Filter
• Internal Thread 2 [mm]: M16x1,5
• Manufacturer: DRIVE

• Filter type: Spin-on Filter
• Height [mm]: 169
• Outer Diameter [mm]: 84
• Internal Thread Size: M16 x 1,5
• Weight [kg]: 0.538
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Injection pump
• Number of Teeth: 80
• Width [mm]: 21
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Wear Warning Contact: without integrated wear sensor
• Height 1 [mm]: 66.9
• Brake System: LUCAS/TRW
• Width 1 [mm]: 87
• Thickness 1 [mm]: 16.5
• Manufacturer: JPN

• Height [mm]: 175
• Outer Diameter [mm]: 83
• Packing Type: Carton
• Filter type: Spin-on Filter
• Thread Size 1: M16x1.5
• Packaging length [cm]: 8.9
• Packaging width [cm]: 8.9
• Packaging height [cm]: 18.7
• Name: CH CFF100144
• Manufacturer: CHAMPION

• Fitting Position: Rear Axle
• Wear Warning Contact: without integrated wear sensor
• Height 1 [mm]: 66.9
• Brake System: LUCAS/TRW
• Width 1 [mm]: 87
• Thickness 1 [mm]: 16.5
• Manufacturer: PROFIPOWER

• Filter type: Spin-on Filter
• Outer Diameter [mm]: 84
• Inner Diameter [mm]: 62
• Thread Size: M16x1.5
• Height [mm]: 184.5
• Manufacturer: HENGST FILTER
• Lisainfo: H119WK
• Additional information: H119WK

• Filter type: Spin-on Filter
• Height [mm]: 188
• Thread Size: M16x1.5
• Outer Diameter [mm]: 85
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Fitting Position: Rear Axle
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Width [mm]: 88
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Width [mm]: 87.6
• Thickness [mm]: 15.8
• Height [mm]: 66.8
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas / TRW
• Manufacturer: DENCKERMANN HAMULCE

• Filter type: Spin-on Filter
• Height [mm]: 188
• Thread Size: M 16x1,5
• Outer Diameter [mm]: 85
• Manufacturer: PROFIPOWER

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Height [mm]: 66.8
• Brake System: TRW
• Width [mm]: 87
• Supplementary Article/Info 2: with bolts/screws
• Thickness [mm]: 16.5
• Manufacturer: LPR

• Driven Units: Injection pump
• Width [mm]: 24
• Material: Metal
• Outer Diameter [mm]: 64
• Manufacturer: KAMOKA

• Driven Units: Injection pump
• Number of Teeth: 80
• Length [mm]: 762
• Width [mm]: 21
• Tooth Pitch [mm]: 9.525
• Manufacturer: BOSCH
• Name: BS 1987948753

• Fitting Position: Rear Axle
• Construction Year from: 01.1997
• Quantity per packing unit: 4
• FMSI Code: D340-7234
• Test Mark: E1 90R-01878/585
• Brake System: TRW
• Supplementary Article/Info 2: without anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP571

• Driven Units: Camshaft
• Number of Teeth: 122
• Width [mm]: 26
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Braking/Driving Dynamics: for vehicles with ABS
• Width 1 [mm]: 87
• Height 1 [mm]: 66.9
• Thickness 1 [mm]: 16.5
• Brake System: LUCAS/TRW
• Wear Warning Contact: without integrated wear sensor
• Weight [kg]: 0.85
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: ABS

• Fitting Position: Rear Axle
• Brake System: Girling-Lucas
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 67
• Wear Warning Contact: excl. wear warning contact
• Vibration: without vibration damper
• Width 1 [mm]: 87
• Thickness 1 [mm]: 16.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Driven Units: Injection pump
• Width [mm]: 24
• Material: Plastic
• Outer Diameter [mm]: 60
• Manufacturer: KAMOKA

• Construction Year to: 03.1997
• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• WVA Number: 20960
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Manufacturer: VALEO
• Name: VA 301463

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 67
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Height [mm]: 141
• Inner Diameter 2 [mm]: 72
• Exit Thread Size: M 16 X 1,5
• Outer Diameter [mm]: 76
• Inner Diameter 1 [mm]: 63
• Filter type: Spin-on Filter
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Quantity per packing unit: 4
• Fitting Position: Rear Axle
• Thickness [mm]: 16.5
• Width [mm]: 87
• Height [mm]: 66.8
• Brake System: LUCAS / TRW
• Weight [kg]: 0.85
• Manufacturer: TOMEX

• Width [mm]: 27
• Outer Diameter [mm]: 73
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Supplementary Article/Info 2: with screw
• Manufacturer: KAMOKA

• Driven Units: Balance shaft
• Vehicle configuration line / variant: HSN
• Number of Teeth: 80
• Width [mm]: 21
• Name: HAMMASRIHM
• Manufacturer: DAY

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 67
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: MEYLE-PD brake pads have a very short brake-in time, to ensure safe initial braking and high performance from the start. MEYLE-PD brake pads have a brake-in coating on the pad or are treated with scorching technology.

• Fitting Position: Rear Axle
• reinforced version:
• Quantity per packing unit: 4
• FMSI Code: D340-7234
• Test Mark: E1 90R-01878/585
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20960
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.2
• Width 2 [mm]: 87
• Height 1 [mm]: 53
• Height 2 [mm]: 53
• Thickness 1 [mm]: 15
• Thickness 2 [mm]: 15
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP2255

• Outer Diameter [mm]: 73
• Width [mm]: 27
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Construction Year from: 01.1996
• Length [mm]: 87
• Width [mm]: 66.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Weight [kg]: 0.786
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Number of pads: 4
• Thickness [mm]: 16.5
• Length [mm]: 87.1
• Height [mm]: 66.6
• Wear Warning Contact: not prepared for wear warning indicator
• Brake Lining: Without Bevelled Edges
• Brake System: TRW
• WVA Number: 20668, 21144
• Name: SK VKBP90606
• Manufacturer: SKF

• Fitting Position: Rear Axle
• Construction Year to: 01.1997
• Quantity per packing unit: 4
• FMSI Code: D228-7309 D228-7498
• Test Mark: E1 90R-01878/541
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 21144
• Friction Lining Material: Low-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.5
• Width 2 [mm]: 87
• Height 1 [mm]: 66.8
• Height 2 [mm]: 66.8
• Thickness 1 [mm]: 16
• Thickness 2 [mm]: 16
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP451

• Fitting Position: Rear Axle
• Thickness [mm]: 14
• Height [mm]: 44
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: FAST

General Information: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Rear Axle
• Width [mm]: 88
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Construction Year from: 01.1996
• Length [mm]: 87
• Width [mm]: 66.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Weight [kg]: 0.786
• Supplementary Article/Info 2: with bolts/screws
• Name: SW 30 91 6144
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1996
• Length [mm]: 87
• Width [mm]: 67
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 17
• Weight [kg]: 0.957
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: BLUE PRINT HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 156
• Thickness [mm]: 19
• Height [mm]: 74
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: ATE
• Warning Contact Length [mm]: 202
• Manufacturer: KAMOKA

• Diameter [mm]: 73
• Width [mm]: 27
• Tensioner Pulley Actuation: Automatic
• Name: SEADE-/JUHTRULL,HAMMASRIHM
• Manufacturer: MAX

• Filter type: Filter Insert
• Height [mm]: 177
• Outer Diameter [mm]: 80
• Diameter 3 [mm]: 62
• Diameter 4 [mm]: 69
• Thread Size 1: M16x1,5
• Thread Size 2: M10x1,5
• Manufacturer: PURFLUX

• Driven Units: Camshaft
• Number of Teeth: 122
• Length [mm]: 1,162
• Width [mm]: 26.5
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: BOS

• Height [mm]: 74
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear sensor
• Number of wear indicators [per axle]: 2
• Connector Shape: round
• Brake System: Teves
• Fitting Position: Front Axle
• Width [mm]: 156
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Filter type: Spin-on Filter
• Diameter [mm]: 80
• Height [mm]: 184
• Thread Size: M16x1,5
• Diameter 2 [mm]: 69
• Sealing Ring Diameter [mm]: 62
• Tightening Torque [Nm]: 20
• Article number of the recommended special tool: OCS 1
• Packaging height [cm]: 18.6
• Net Weight [g]: 483
• Packaging length [cm]: 8.9
• Packaging width [cm]: 8.9
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN KC69

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Article number of recommended accessories: 1987474106, 1987474939, 1987474253
• Product must be determined on the vehicle or the motor:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21144
• Thickness [mm]: 15.1
• Width [mm]: 87
• Height [mm]: 66.8
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Driven Units: Camshaft
• Number of Teeth: 122
• Length [mm]: 1,162
• Width [mm]: 26.5
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Width [mm]: 24
• Material: Metal
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 60
• Name: CA 500215
• Manufacturer: CAFFARO

• Width [mm]: 26.5
• Number of Teeth: 122
• Belts: with rounded tooth profile
• Weight [kg]: 0.15
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: Spin-on Filter
• Diameter [mm]: 84
• Height [mm]: 184.5
• Exit Thread Size: M 16 x 1,5
• Name: KšTUSEFILTER
• Manufacturer: BOS

• Fitting Position: Front Axle
• Width [mm]: 156.3
• Thickness [mm]: 19.5
• Height [mm]: 74
• Wear Warning Contact: incl. wear warning contact
• Brake System: ATE
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Filter type: Spin-on Filter
• Diameter [mm]: 80
• Height [mm]: 184
• Thread Size: M16x1,5
• Diameter 2 [mm]: 69
• Sealing Ring Diameter [mm]: 62
• Tightening Torque [Nm]: 20
• Article number of the recommended special tool: OCS 1
• Packaging height [cm]: 18.6
• Net Weight [g]: 483
• Packaging length [cm]: 8.9
• Packaging width [cm]: 8.9
• Manufacturer: MAHLE KNECHT

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 67.2
• Thickness [mm]: 16.5
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01025/181
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Brake System: ATE
• Height [mm]: 74.2
• Number of wear indicators [per axle]: 2
• Warning Contact Length [mm]: 200
• Width [mm]: 156.4
• Thickness [mm]: 20.3
• Manufacturer: LPR

• Fitting Position: Front Axle
• Braking/Driving Dynamics Article Reference: for ABS
• Wear Warning Contact: with integrated wear sensor
• Manufacturer Restriction: ATE
• Height 1 [mm]: 74.2
• Height 2 [mm]: 74.2
• Width 1 [mm]: 156.5
• Width 2 [mm]: 156.5
• Thickness 1 [mm]: 19.5
• Thickness 2 [mm]: 20.5
• Manufacturer: PROFIPOWER

• Width [mm]: 156.3
• Height [mm]: 74
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear warning contact
• Number of wear indicators [per axle]: 2
• Connector Shape: round
• WVA Number: 20676
• Brake System: Teves
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: ATE
• Wear Warning Contact: incl. wear warning contact
• Height [mm]: 74.2
• Width [mm]: 156.4
• Thickness [mm]: 19.5
• Manufacturer: AUTO-GH

• Fitting Position: Rear Axle
• Width [mm]: 88
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Friction Lining Material: Ceramic
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Driven Units: Camshaft
• Vehicle configuration line / variant: HSN
• Number of Teeth: 122
• Width [mm]: 26.5
• Name: HAMMASRIHM
• Manufacturer: DAY
• Lisainfo: 94774 DAY
• Additional information: 94774 DAY