Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
Manufacturer: DELLO AUTOMEGA
- Material: Plastic
- Colour: blue
- Lisainfo: Cap for expansion tank
- Additional information: Cap for expansion tank
- Quantity per packing unit: 4
- Height [mm]: 24
- Weight [kg]: 0.047
- Pressure [bar]: 1.2
- Colour: blue
- Material: Plastic
- Inner Diameter [mm]: 33
- Outer Diameter [mm]: 58
- Weight [g]: 47
- Thread Size 1: M3
- Manufacturer: METALCAUCHO
- Colour: blue
- Material: Plastic
-
Name: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Manufacturer: MAX
- Construction Year to: 04.1997
- Colour: blue
- Weight [kg]: 0.089
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Pressure [bar]: 1.3
- Material: Plastic
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Always compare old and new part (in particular OE No.):
- Name: CE 61SKV014
- Manufacturer: ESEN SKV
- Quantity per packing unit: 4
- Diameter [mm]: 63
- Height [mm]: 38
- Weight [kg]: 0.07
- Switch point to [bar]: 1.6
- Pressure [bar]: 1.4
- Colour: blue
- Material: Plastic
- Inner Diameter [mm]: 35.5
- Outer Diameter [mm]: 80
- Weight [g]: 70
- Thread Size 1: M3
- Manufacturer: METALCAUCHO
- Weight [kg]: 0.056
- Opening Pressure [bar]: 1.2
- Manufacturer: 3RG
- Colour: blue
- Pressure [bar]: 1.5
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Material: Plastic
- Opening Pressure [bar]: 1.1
- Weight [kg]: 0.036
- for OE number: 443 121 321
-
Name: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Opening Pressure [bar]: 1.5
- Guarantee: 3 years guarantee
- Weight [kg]: 0.07
- Always compare old and new part (in particular OE No.):
- Name: CE 61SKV011
- Manufacturer: ESEN SKV
- Material: Plastic
- Opening Pressure [bar]: 1.1
- Weight [kg]: 0.036
- for OE number: 443 121 321
- Name: SW 99 90 2269
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Thread Size: M63x3
- Colour: blue
- Material: Plastic
-
Name: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Manufacturer: MAX
- for OE number: 95510644720
- Manufacturer: KAMOKA
- for OE number: 1J0121321A
- Pressure [bar]: 1.5
- Colour: blue
- Weight [g]: 71
- Name: IM 43000
- Manufacturer: ORIGINAL IMPERIUM
- Construction Year to: 04.1997
- Colour: black
- Mounting Type: Screw Connection
- Pressure [bar]: 1.1
- Weight [g]: 34.2
- Packaging length [cm]: 75
- Packaging width [cm]: 75
- Packaging height [cm]: 83
- Manufacturer: MOTORAD
- for OE number: 1H0121321D
- Weight [g]: 60
- Name: IM 43025
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 171121321D
- Required quantity: 1
- Pressure [bar]: 1.2
- Material: Plastic
- Weight [g]: 57
- Quantity Unit: Piece
- Name: IM 29646
- Manufacturer: ORIGINAL IMPERIUM
Manufacturer: NRF KLIMATYZACJA
- New Part:
- Opening Pressure [bar]: 1.5
- Material: Plastic
- Manufacturer: AKSDASIS
- Construction Year to: 04.1997
- Colour: blue
- Pressure [bar]: 1.5
- for OE number: 5Q0121321
- Weight [g]: 68.7
- Packaging length [cm]: 75
- Packaging width [cm]: 75
- Packaging height [cm]: 83
- Manufacturer: MOTORAD
- Thread Type: with internal thread
- Material: Plastic
- Opening Pressure [bar]: 1.4
- Manufacturer: METZGER
- Pressure [bar]: 1.5
-
Name: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Manufacturer: VER
- Colour: blue
- Material: Plastic
- Opening Pressure [bar]: 1.5
-
Thread Size: M63 x 3,
0 - Weight [kg]: 0.16
- for OE number: 1J0 121 321 B
-
Name: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Colour: blue
- Material: Plastic
- Opening Pressure [bar]: 1.5
-
Thread Size: M63 x 3,
0 - Weight [kg]: 0.16
- for OE number: 1J0 121 321 B
- Name: SW 30 91 4700
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Supplementary Article/Info 2: without lid
- Manufacturer: ABAKUS LORO
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Supplementary Article/Info 2: without cover
- Guarantee: 3 years guarantee
- Article number of recommended accessories: 61SKV014
- Weight [kg]: 0.82
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Pressure [bar]: 1.3
- Supplementary Article/Info 2: with cover
- Guarantee: 3 years guarantee
- Article number of recommended accessories: 61SKV014
- Weight [kg]: 0.86
- Always compare old and new part (in particular OE No.):
- Manufacturer: SKV GERMANY
- Materjal: Plastik
- Piirangutega toode/piirangu info 2: ilma kaaneta
- Manufacturer: JP GROUP
- Lisainfo: Expansion tank for radiator
- Additional information: Expansion tank for radiator
- Küte/Jahutus: koos jahutusvedeliku nivoolüliti ühendusega
- Materjal: Plastik
-
Piirangutega toode/piirangu info 2: ilma kaaneta,
koos anduriga - Edasi-/tagasikäik: koos tagasijooksuga
- Pistikkontaktide arv: 2
- Pistikukatte kuju: ümar
- soovitatav remondilaiendus, vaata lisavarustuse nimekirja:
- jälgida süsteemi mahutavust:
-
Name: PAISUPAAK,
JAHUTUSVEDELIK - Manufacturer: HAN
Üldine informatsioon: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Piirangutega toode/piirangu info 2: ilma korgita
-
Name: PAISUPAAK,
JAHUTUSVEDELIK - Manufacturer: MAX
- Värv: valge
-
Piirangutega toode/piirangu info 2: koos anduriga,
koos mütsiga -
Name: Paisupaak,
jahutusvedelik - Manufacturer: NRF
- Materjal: Plastik
-
pakendi pikkus [cm]: 22,
5 - pakendi laius [cm]: 22
-
pakendi kõrgus [cm]: 15,
5 -
Kaal (kg): 1,
662 - OE-numbri jaoks: 4A0121403
- Manufacturer: AKSDASIS
- OE-numbri jaoks: 4A0 121 403
- Manufacturer: TRUCKTEC AUTOMOTIVE
-
Maht(liiter): 1,
9 - Materjal: Plastik
- Piirangutega toode/piirangu info 2: ilma kaaneta
- Piirangutega toode/piirangu info: ilma jahutusvedeliku taseme andurita
- Kaal (g): 868
- Piirangutega toode/piirangu info 2: korgiga
-
Name: Paisupaak,
jahutusvedelik - Manufacturer: IMP
- Pikkus (mm): 221
- Laius (mm): 156
- Kõrgus (mm): 245
- Värv: valge
- lisaks vajatav toode (tootekood): CRB 30 000S
-
Piirangutega toode/piirangu info 2: ilma mütsita,
ilma andurita -
pakendi kõrgus [cm]: 17,
5 - pakendi pikkus [cm]: 25
- pakendi laius [cm]: 25
- Netokaal [g]: 830
- Name: MH CRT110000S
- Manufacturer: MAHLE
- Piirangutega toode/piirangu info 2: ilma kaaneta
-
Materjal: PP
(polüpropüleen) - soovitava lisavarustuse artiklinumber: 100 121 0042
- keem.omadus: temperatuurikindel
-
Name: PAISUPAAK,
JAHUTUSVEDELIK - Manufacturer: MEY
Üldine informatsioon: Improved version using temperature stable polypropylene with guaranteed longer lifetime
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks