• Number of pins: 2
• Colour: blue
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 2
• Colour: white
• External Thread [mm]: M14x1.5
• Lisainfo: Temperature sensor for cooling system, 10/20/80 C
• Additional information: Temperature sensor for cooling system, 10/20/80 C

• Number of pins: 3
• Switch Point [°C]: 118
• Colour: brown
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for cooling system 118 C, M14x1.5
• Additional information: Thermo switch for cooling system 118 C, M14x1.5

• for OE number: 049919563B
• Thread Size: M10x1 mm
• Spanner Size: 13 mm
• Number of pins: 1
• Manufacturer: KAMOKA
• Additional information: 4080049 KAMOKA
• Lisainfo: 4080049 KAMOKA

• Length [mm]: 52
• Spanner Size: 19
• Housing Colour: white
• Manufacturer: KAMOKA

• Vehicle Equipment: for vehicles with automatic climate control
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: blue
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 100 191 HP
• Additional information: 100 191 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 025906041A
• Housing Colour: blue
• Manufacturer: KAMOKA

• Manufacturer: AIC
• Lisainfo: 51913 AIC
• Additional information: 51913 AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Thread Size: M10 x 1
• Spanner Size: 14
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 1
• Colour Coding: blue
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Connector Shape: angular
• Number of pins: 3
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 85, 92
• Number of switch stages: 2
• Thread Size: M22 x 1,5
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: MAX

• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Bolted
• Connector Shape: rectangular
• Number of pins: 2
• Socket colour: white
• Spanner Size: 19
• Thread Size: M14x1.5
• for OE number: 035919369M
• Supplementary Article/Info 2: with seal ring
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Connecting thread: M10 x 1
• Manufacturer: ERA

• Number of pins: 3
• Spanner Size: 29
• Thread Size: M 22 x 1,5
• Connector Shape: angular
• Housing Colour: black
• Supplementary Article/Info 2: with seal ring
• Switch-on point [°C]: 85, 93
• Shut-off Point [°C]: 80, 88
• Number of switch stages: 2
• Manufacturer: DELLO AUTOMEGA

• Supplementary Article/Info 2: with seal ring
• Number of pins: 2
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Equipment: for vehicles with automatic climate control
• Sensor Type: NTC Sensor
• Colour: blue
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Thread Size: M 14
• Number of pins: 2
• Colour Coding: white
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Engine Code: AEL
• Number of pins: 1
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: blue
• Name: ANDUR,OLITEMPERATUUR
• Manufacturer: EPS

• for OE number: A0015403045
• Colour: grey
• Spanner Size: 29
• Manufacturer: KAMOKA

• Engine Code: AEL
• Thread Size: M14x1.5
• Manufacturer: VERNET

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Connector Shape: angular
• Thread Size: M 22 x 1,5
• Number of pins: 3
• Number of switch stages: 2
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 85, 92
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Name: W¤CZNIK WENTYLATORA VAG
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 3
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Lisainfo: Thermo switch for fan 95-84 C/102-91 C, 3 pins
• Additional information: Thermo switch for fan 95-84 C/102-91 C, 3 pins

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 93 4762
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M14x1,5
• Colour: white
• Spanner Size: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 2
• Weight [kg]: 0.034
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Spanner Size: 29
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• for OE number: 191 959 481 C
• Number of pins: 3
• Thread Size: M22x1,5
• Switch Point [°C]: 95, 102
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: MAX
• Lisainfo: 21-0155
• Additional information: 21-0155

• Connector Shape: angular
• Thread Size: M 22 x 1,5
• Number of pins: 3
• Spanner Size: 29
• Switch-on point [°C]: 85, 93
• Shut-off Point [°C]: 80, 88
• Number of switch stages: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Name: W¤CZNIK WENTYLATORA VAG
• Manufacturer: HAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Sensor Type: NTC Sensor
• Thread Size: M14x1,5
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Colour: white
• Number of pins: 2
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thread Size: M 22 x 1,5
• Number of pins: 3
• Connector Shape: angular
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Spanner Size: 29
• Number of switch stages: 2
• Supplementary Article/Info 2: with seal ring
• Housing Colour: black
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M20
• Number of pins: 2
• Connector Shape: rectangular
• Manufacturer: ERA

• for OE number: 191 959 481 C
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Manufacturer: TRUCKTEC

• Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of pins: 2
• Supplementary Article/Info 2: with seal ring
• Socket colour: white
• Manufacturer: ERA

• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 93 3825
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 3
• Temperature range to [°C]: 125
• Manufacturer: ERA

• Number of pins: 3
• Connector Shape: oval
• Socket colour: black
• Shut-off Point [°C]: 95, 92
• Switch Point [°C]: 85, 102
• Thread Size: M22x1,5 mm
• Spanner Size: 29 mm
• for OE number: 6U0959481A
• Manufacturer: MEAT&DORIA

• Quantity: 1
• Weight [kg]: 0.03
• Number of connectors: 2
• External Thread [mm]: M14 x 1,5
• Screw length below head [mm]: 28
• Length [mm]: 52
• Colour: white
• Spanner Size: 19
• Supplementary Article/Info 2: with seal ring
• Required quantity: 1
• Material: Brass, Plastic
• General Information: temperature sensor
• Manufacturer: VIKA

• Length [mm]: 52
• External Thread Size: M14 x 1,5
• Spanner Size: 19
• Number of connectors: 2
• Colour: white
• Material: Brass, Plastic
• Screw length below head [mm]: 28
• Weight [kg]: 0.03
• Supplementary Article/Info 2: with seal ring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M22 x 1,5
• Colour: white
• Switch: for double thermal switch
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Weight [kg]: 0.077
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 03.1997
• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 84, 91
• Thread Size: M22x1.5
• Sensor Type: Open-style sensor
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: VER

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: round
• Number of pins: 3
• Temperature range [°C]: 120
• for OE number: 053919501A
• Supplementary Article/Info 2: with seal ring
• Manufacturer: NRF

• Switch Point [°C]: 84
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Operating voltage [V]: 12
• Switch point from [°C]: 91, 84
• Switch point to [°C]: 102, 95
• Spanner Size: 29
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Thread Size: M22 x 1,5
• Number of pins: 3
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: MEY

• External Thread Size: M22 x 1,5
• Spanner Size: 29
• Number of connectors: 3
• Colour Coding: grey
• Temperature range from [°C]: 95, 102
• Temperature range to [°C]: 84, 92
• Weight [kg]: 0.061
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: 22x1,5
• Number of pins: 3
• Manufacturer: FAE

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Thread Size: M22x1,5
• Switch: for double thermal switch
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Climate Zones: for hot climate zones
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Weight [kg]: 0.076
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AEL
• Number of pins: 2
• Thread Size: M14x1,5
• Spanner Size: 19
• Corresponds to the original part in colour: black
• Name: EP 1.830.126
• Manufacturer: EPS

• Number of pins: 3
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Engine Code: AEL
• Thread Size: M22x1,5
• Spanner Size: 29
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: EPS

• Housing Colour: white
• Number of pins: 2
• Thread Size: M14X1.5-6g
• Spanner Size: 19
• Name: DE TS10255
• Manufacturer: DELPHI

• Thread Size: M22x1.5
• Number of pins: 3
• Tightening Torque [Nm]: 50
• Supplementary Article/Supplementary Info: with gasket/seal
• Switch-on point [°C]: 102, 95
• Shut-off Point [°C]: 84, 91
• Packaging width [cm]: 3.5
• Packaging length [cm]: 3.7
• Net Weight [g]: 62
• Packaging height [cm]: 7.2
• Manufacturer: MAHLE
• Name: MH TSW31

• Construction Year to: 04.1997
• Mounting Type: Bolted
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Thread Size: M14x1,5
• Sensor Type: NTC Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107351
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Opening Temperature [°C]: 120
• Number of pins: 3
• Weight [kg]: 0.03
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 04.1997
• Mounting Type: Bolted
• Switch point from [°C]: 85
• Switch point to [°C]: 102
• Voltage [V]: 12
• Number of pins: 3
• Thread Size: M 22 x 1,5
• Switch: with double thermal switch
• Combi Switch Function: Normally Open Contact
• Spanner Size: 29
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA

• Construction Year to: 04.1997
• Mounting Type: Bolted
• Switch point from [°C]: 87
• Switch point to [°C]: 102
• Voltage [V]: 12
• Number of pins: 3
• Thread Size: M 22 x 1,5
• Switch: with double thermal switch
• Combi Switch Function: Normally Open Contact
• Spanner Size: 29
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• Name: HE 6ZT007802001
• Manufacturer: HELLA

• Construction Year to: 03.1997
• Switch point to [°C]: 84
• Shut-off Point [°C]: 91
• Switch point from [°C]: 95
• Switch Point [°C]: 102
• Spanner Size: 29
• Manufacturer: VALEO
• Name: VA 819769

• Colour: brown
• Number of pins: 3
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Observe technical data:
• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: Alfa Romeo, Fiat, VAG
• Number of pins: 2
• Cable Length [mm]: 250
• Cable Cross Section [mm²]: 1
• Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Manufacturer: HBE

Name: Kaabli remondikomplekt, jahutusvedeliku temperatuuri andur

• Height [mm]: 65.4
• Weight [kg]: 0.096
• Switch Point [°C]: 118
• Colour: brown
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Switch point from [°C]: 118
• Switch point to [°C]: 113
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.