• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Manufacturer: MAX

Name: Laager - K„„ndmik. AUDI T. 80, 100, 200, A3, A4, A6, CABRIOLET, COUPE, SUPER 90 1.8-4.2 09.66-01.05 LE/PR

• Vehicle Equipment: for vehicles without level control
• Inner Diameter [mm]: 10
• Material: Rubber/Metal
• Fitting Position: Rear Axle both sides
• Outer Diameter [mm]: 80
• Supplementary Article/Info 2: without bearing
• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI 100/200/A6
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI 100/200/A6
(kvaliteediklass: PJ)"

• Vehicle Equipment: for vehicles without level control
• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Rubber/Metal
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Fitting Position: Rear Axle
• Height [mm]: 186
• Required quantity: 2
• Name: PUHVER, VEDRUSTUS
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Manufacturer: MEY

Name: Laager - K„„ndmik. AUDI T. 80, 100, 200, A3, A4, A6, CABRIOLET, COUPE, SUPER 90 1.8-4.2 09.66-01.05 LE/PR

• Vehicle Equipment: for vehicles without level control
• Height [mm]: 40
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 80
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.175
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions. Name: Laager - K„„ndmik. AUDI T. 80, 100, 200, A3, A4, A6, CABRIOLET, COUPE, SUPER 90 1.8-4.2 09.66-01.05 LE/PR

• Vehicle Equipment: for vehicles without level control
• Inner Diameter [mm]: 10
• Height [mm]: 40
• Outer Diameter [mm]: 80
• Material: Rubber/Metal
• Fitting Position: Rear Axle
• Weight [kg]: 0.175
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 54 0020
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Inner Diameter [mm]: 91
• Outer Diameter [mm]: 112
• Height [mm]: 15
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle
• Technical Information: Suspension mounting only (no bearing)
• Manufacturer: KYB

Name: Laager - K„„ndmik. AUDI T. 80, 100, 200, A3, A4, A6, CABRIOLET, COUPE, SUPER 90 1.8-4.2 09.66-01.05 LE/PR

• Fitting Position: Rear Axle
• Suspension: for vehicles without stabiliser bar
• Vehicle Equipment: for vehicles without level control
• SVHC: No SVHC present!
• Name: LU 814010010
• Manufacturer: FAG

• Fitting Position: Right, Left, Rear Axle
• Number of Parts [parts]: 1
• Width 1 [mm]: 36
• Outer Diameter 1 [mm]: 79
• Manufacturer: SNR

• Fitting Position: Front Axle Left, Front Axle Right
• Bearing Type: Angular Ball Bearing
• Lisainfo: Ball bearing for strut bearing
• Additional information: Ball bearing for strut bearing

• Specification: Type: universal
• Diameter [mm]: 16
• Fitting Position: Front Axle
• Manufacturer: ASHIKA

• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 112
• Inner Diameter [mm]: 91
• for OE number: 4A0 412 249
• Name: Top mount left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI 100/A6
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI 100/A6
(kvaliteediklass: PJ)"

• Vehicle Equipment: for vehicles without level control
• Fitting Position: Rear Axle
• Inner Diameter [mm]: 10
• Manufacturer: BILSTEIN
• Name: Suspension strut support bearing left=right
• Quality class: Q

• for OE number: 4D0412377F
• Fitting Position: Front Axle
• Required quantity: 2
• Material: Rubber/Metal
• Weight [g]: 172
• Name: IM 35005
• Manufacturer: ORIGINAL IMPERIUM

• for OE number: 431412249D
• Fitting Position: Front Axle
• Required quantity: 2
• Weight [g]: 100
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 15
• Inner Diameter [mm]: 81
• Outer Diameter [mm]: 102
• Name: IM 30790
• Manufacturer: ORIGINAL IMPERIUM

• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Outer Diameter [mm]: 112
• Inner Diameter [mm]: 91
• Name: Laager - K„„ndmik VW
• Manufacturer: MAX

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: MAX

• for model year: 1996
• Fitting Position: Front Axle
• Weight [kg]: 0.13
• Packaging length [cm]: 11.3
• Packaging width [cm]: 11.3
• Packaging height [cm]: 1.6
• Manufacturer: FEBEST

• Fitting Position: Front Axle Left, Front Axle Right, Upper
• Mounting Type: Rubber-Metal Mount
• Quantity per axle: 2
• Consult accessories list for recommended additional repairs:
• Supplementary Article/Info 2: without rolling bearing
• Replace in pairs only:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without level control
• Supplementary Article/Info 2: without bearing
• Guarantee: 5 years guarantee
• Weight [kg]: 0.2
• Packaging length [cm]: 9.6
• Packaging width [cm]: 8.3
• Packaging height [cm]: 8.2
• Manufacturer: MONROE

• Fitting Position: Front Axle Left, Front Axle Right
• Mounting Type: Rubber-Metal Mount
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 73
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Bearing for strut without bearing, front
• Additional information: Bearing for strut without bearing, front

• Fitting Position: Rear Axle, Rear Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI
(kvaliteediklass: PJ)"

• Inner Diameter [mm]: 17
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.43
• Supplementary Article/Info 2: without ball bearing
• Observe service information:
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 4A0412249
• Fitting Position: Front Axle
• Weight [g]: 143
• Bearing manufacturer: IMPERGOM
• Thickness [mm]: 15
• Inner Diameter [mm]: 91
• Outer Diameter [mm]: 112
• Name: IM 30792
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Rear Axle
• Manufacturer: JAPKO

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Front Axle Left, Front Axle Right
• Required quantity: 2
• Supplementary Article/Info 2: without bearing
• Alternative Repair Kit: 80001652
• Weight [kg]: 0.7
• Name: COC 80000242
• Manufacturer: CORTECO

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: MAX

• Inner Diameter [mm]: 17
• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.43
• Supplementary Article/Info 2: without ball bearing
• Name: SW 30 54 0009
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• for OE number: 4A0 412 377 A, 4A0 412 377 B, 4A0 412 377 C
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: LMI

SVHC: No information available, please contact the manufacturer!

• Quantity per axle: 2
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: without ball bearing
• for OE number: 4A0 412 377 A, 4A0 412 377 B, 4A0 412 377 C
• Name: Laager - K„„ndmik. VW P. A100 91-7/94/ A6 94-97
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Width [mm]: 15
• Inner Diameter [mm]: 91
• Outer Diameter [mm]: 112
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.13
• Name: Laager - K„„ndmik VW
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Inner Diameter [mm]: 91
• Outer Diameter [mm]: 112
• Height [mm]: 15
• Bearing Type: Ball Bearing
• Name: Laager - K„„ndmik VW
• Manufacturer: MEY

• Width [mm]: 15
• Inner Diameter [mm]: 91
• Outer Diameter [mm]: 112
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.13
• Name: SW 30 54 0019
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [g]: 516
• Supplementary Article/Info 2: without bearing
• Name: IM 35029
• Manufacturer: ORIGINAL IMPERIUM

• Fitting Position: Front Axle
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 814009810

• Fitting Position: Front Axle
• Supplementary Article/Info 2: without bearing
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: MEY

• Fitting Position: Rear Axle
• Name: Tolmukaitse komplekt,Amordid
• Manufacturer: JPA

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Rear Axle
• Manufacturer: MAGNETI MARELLI

• Width 1 [mm]: 15
• Outer Diameter 1 [mm]: 112
• Fitting Position: Front Axle Right
• Manufacturer: SNR /NTN-SNR/

• Specification: Type: universal
• Diameter [mm]: 16
• Fitting Position: Front Axle
• Manufacturer: JPA

Name: Kaitsekaan/kaitsekumm - Vedrustus/amordid NISSAN P.

• Fitting Position: Front Axle, Front Axle both sides
• Name: Shock absorber protection kit left+right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle Left, Front Axle Right
• Lisainfo: Bearing for strut with bearing, front
• Additional information: Bearing for strut with bearing, front

• Fitting Position: Front Axle
• Manufacturer: JP GROUP
• Lisainfo: Dust Cover Kit, shock absorber
• Additional information: Dust Cover Kit, shock absorber

• Fitting Position: Front Axle
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Weight [kg]: 0.1
• Packaging length [cm]: 14.3
• Packaging width [cm]: 4.1
• Packaging height [cm]: 14.3
• Manufacturer: MONROE

• Name: Shock absorber protection kit left+right
• Quality class: Q

Lisainfo: "Tootja: POLCAR
AUDI 100
(kvaliteediklass: Q)"

• Vehicle Equipment: for vehicles without level control
• Fitting Position: Front Axle
• Inner Diameter [mm]: 17
• Outer Diameter [mm]: 73
• Height [mm]: 41
• Manufacturer: 3RG

• Name: Suspension strut support bearing left=right
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI 100/A6
(kvaliteediklass: PJ)"

• Fitting Position: Rear Axle
• Vehicle Equipment: for vehicles without level control
• Quantity per packing unit: 2
• Guarantee: 5 years guarantee
• Weight [kg]: 0.4
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.9
• Supplementary Article/Info 2: with ball bearing
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Supplementary Article/Info 2: with bearing
• Quantity Unit: Set
• Required quantity: 2
• replacement in pairs recommended:
• Name: Laager - K„„ndmik. VW P. A100 91-
• Manufacturer: MEY

• Material: Rubber/Metal
• Fitting Position: Front Axle
• Weight [kg]: 0.9
• Supplementary Article/Info 2: with ball bearing
• Name: SW 30 55 0005
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Weight [kg]: 0.98
• Supplementary Article/Info 2: with ball bearing, with fastening material
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Manufacturer: AUTOFREN SEINSA
• Name: SE D5-140

• Fitting Position: Rear Axle
• Name: TOLMUKAITSE KOMPLEKT,AMORDID
• Manufacturer: SAA

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Quantity per packing unit: 2
• Guarantee: 5 years guarantee
• Weight [kg]: 0.7
• Packaging length [cm]: 22
• Packaging width [cm]: 11
• Packaging height [cm]: 18
• Manufacturer: MONROE

• Fitting Position: Right, Left, Front Axle
• Number of Parts [parts]: 2
• Article number of the recommended special tool: Clas : OM1112, Clas : OP3231
• Manufacturer: SNR /NTN-SNR/
• Name: SN KB657.09

• Fitting Position: Front Axle
• Technical Information: Suspension mounting + separated suspension bearing
• Manufacturer: KYB

• Vehicle Equipment: for vehicles without level control
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with ball bearing
• Manufacturer: BILSTEIN
• Quality class: Q
• Name: Suspension strut support bearing left=right

Additional information: "Tootja: BILSTEIN
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
(kvaliteediklass: Q)"