Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Engine Code: ADR
-
Spark Plug: 2 -
Earthed Electrode, with resistor - Electrode Gap [mm]: 0.9
- Thread Size: M14 x 1.25
- Thread Length [mm]: 19
- Spanner Size: 16
-
Technical Information: Nichel-
Chromium with internal in branch - Manufacturer: MAGNETI MARELLI
- Engine Code: ADR
-
Spark Plug: 3 -
Earthed Electrode, with resistor - Electrode Gap [mm]: 1
- Thread Size: M14 x 1.25
- Thread Length [mm]: 19
- Spanner Size: 16
-
Technical Information: Nichel-
Chromium with internal in branch - Manufacturer: MAGNETI MARELLI
-
Name: MM SNB7009-
10
-
Fuel Type: CNG/
LPG - Supplementary Article/Info 2: Electrode gap must be set for operation on gas
-
Replace after km: 15,
000 - Required quantity: 4
- Electrode Gap [mm]: 0.8
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 3
- Number of pins: 1
- Manufacturer: BOSCH
- Name: BS 0242240593
- Lisainfo: 0242240593 BOSCH
- Additional information: 0242240593 BOSCH
-
Spark Plug: Nickel Middle Electrode,
3 - Earthed Electrode - Thread Length [mm]: 19
- Spanner Size: 16 mm
- Electrode Gap [mm]: 1
- for OE number: 101 000 051AC
- Manufacturer: KAMOKA
-
Spark Plug: 3 -
Earthed Electrode - Supplementary Article/Info 2: Do not fit parts from different manufacturers!
- Manufacturer: TOPRAN HANS PRIES
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Engine Code: ADR
- Required quantity: 4
- Quantity per packing unit: 4
- for OE number: 1WT318110
- Connector type: Solid SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 43
-
Spark Plug: 1 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 19
- Gross Weight [g]: 46
- alternative item: IK20
- Manufacturer: DENSO
- Name: DN K20TT
- Lisainfo: K20TT DENSO
- Additional information: K20TT DENSO
- Quantity per packing unit: 10
- contains article number: 13528
-
External Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Electrode Gap [mm]: 1
-
Spark Plug: with gasket seat,
3 - Earthed Electrode - Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.9
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
-
Quality/ Grade: Ti Poly-
V - Packing Type: Box
-
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
- Technical Information Number: CET2
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Projection [mm]: 1.5
- Manufacturer: CHAMPION
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 10
- Electrode Gap [mm]: 0.9
- Connector type: SAE
-
Thread Size: M14x1,
25 - Spanner Size: 16 mm
-
Quality/ Grade: Poly-
V Tit -
Spark Plug: 1 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Resistor from [kOhm]: 3
- Resistor to [kOhm]: 10
- Manufacturer: BERU
- Required quantity: 4
- Electrode Gap [mm]: 0.9
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 6
- Number of pins: 2
- Manufacturer: BOSCH
- Name: BS 0242235668
- Engine Code: ADR
- Required quantity: 4
- Quantity per packing unit: 10
-
for OE number: 101-
000- 033AA - Connector type: Removable SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 43
-
Spark Plug: 3 -
Earthed Electrode, Nickel Middle Electrode - Thread Length [mm]: 19
- Gross Weight [g]: 46
- alternative item: K20TT
- Manufacturer: DENSO
- Required quantity: 4
- Quantity per packing unit: 10
- Electrode Gap [mm]: 1
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Nickel GE
- Packing Type: Box
- Thread Length [mm]: 19
- Technical Information Number: RC8VTYC4
- Spark Position [mm]: 5
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 8.85
- Packaging width [cm]: 2.6
- Packaging height [cm]: 2.35
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1.5
-
Name: CH OE032/
T10 - Manufacturer: CHAMPION
Spark Plug: 3 - Earthed Electrode, with gasket seat, Copper Centre Electrode
- Electrode Gap [mm]: 0.8
-
External Thread [mm]: M14 x 1,
25 - Spanner Size: 16
-
Spark Plug: 3 -
Earthed Electrode - Thread Length [mm]: 19
- Weight [kg]: 0.044
- Manufacturer: VEMO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Engine Code: ADR
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 5.2
- Manufacturer: NGK
-
Name: NG BKUR6ET-
10 -
Additional information: BKUR6ET-
10 -
Lisainfo: BKUR6ET-
10
Spark Plug: Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat, Fixed SAE connector
- Engine Code: ADR
- Quantity per packing unit: 4
- Spanner Size: 16 mm
-
Thread Size: M14 x 1,
25 - Thread Length [mm]: 19
- Spark Position [mm]: 5.2
- Manufacturer: NGK
-
Name: NG V-
LINE 24 -
Additional information: V-
LINE 24 -
Lisainfo: V-
LINE 24
Spark Plug: Nickel Middle Electrode, 3 - Earthed Electrode, Interference Suppression 1 kOhm, with gasket seat, Fixed SAE connector
- Required quantity: 4
- Quantity per packing unit: 10
- Electrode Gap [mm]: 1
- Connector type: SAE
-
Thread Size: M14x1,
25 - Spanner Size: 16 mm
-
Spark Plug: 3 -
Earthed Electrode, with gasket seat - Thread Length [mm]: 19
-
Technical Information Number: 14 FGH-
7 DTURX - Self-service suited packaging see parts list:
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Manufacturer: BERU
- Required quantity: 4
- Alternatively:
- Quantity per packing unit: 4
- Electrode Gap [mm]: 1
- Connector type: SAE
- Thread Size: M14x1.25
- Spanner Size: 16 mm
- Quality/ Grade: Pt GE
- Packing Type: Box
- Thread Length [mm]: 19
- Technical Information Number: KC8WYPB4
- Spark Position [mm]: 3
- Tightening torque from [Nm]: 25
- Tightening torque to [Nm]: 30
- Packaging length [cm]: 10
- Packaging width [cm]: 2.5
- Packaging height [cm]: 2.5
- Resistor from [kOhm]: 1
- Resistor to [kOhm]: 2
- Projection [mm]: 1.5
- Name: CH CCH9805
- Manufacturer: CHAMPION
Spark Plug: 1 - Earthed Electrode, with gasket seat, Iridium Middle Electrode
- Tightening Torque [Nm]: 25
- Electrode Gap [mm]: 1
- Thread Size: M14 x 1.25
- Spanner Size: 16
-
Spark Plug: 1 -
Earthed Electrode - Thread Length [mm]: 19
- Assy./disassy. by qualified personnel required!:
- Name: HE 8EH188706071
- Manufacturer: HELLA
- Required quantity: 4
- Quantity Unit: Kit
- Electrode Gap [mm]: 0.9
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 6
- Number of pins: 2
- Manufacturer: BOSCH
- Name: BS 0242235914
-
Fuel Type: CNG/
LPG -
Replace after km: 30,
000 - Required quantity: 4
- Electrode Gap [mm]: 0.7
- Tightening Torque [Nm]: 28
-
Thread Size: M 14 x 1,
25 - Thread Length [mm]: 19
- Spanner Size: 16
- Spark Position [mm]: 4
- Number of pins: 1
- Manufacturer: BOSCH
- Name: BS 0242240653
- Engine Code: ADR
- Required quantity: 4
-
Fuel Type: CNG/
LPG - Quantity per packing unit: 4
- Connector type: Solid SAE
- Diameter [mm]: 14
- Spanner Size: 16
- Tightening Torque [Nm]: 22
- Weight [g]: 43
-
Spark Plug: 1 -
Earthed Electrode, Platinum mass electrode - Thread Length [mm]: 19
- Gross Weight [g]: 46
- alternative item: IK20TT
- Manufacturer: DENSO
- Name: DN IK20TT
- Lisainfo: IK20TT DENSO
- Additional information: IK20TT DENSO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks