• Outer Diameter [mm]: 72
• Width [mm]: 20
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: BOS

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.5
• for OE number: 056 109 119 A
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Driven Units: Camshaft
• Vehicle configuration line / variant: CR
• Number of Teeth: 121
• Width [mm]: 18
• Name: HAMMASRIHM
• Manufacturer: DAY

• Filter type: In-Line Filter
• Outer Diameter [mm]: 85
• Height [mm]: 169
• Thread Size Entry: M 14 x 1,5 mm
• Thread Size Exit: M 14 x 1,5 mm
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Width [mm]: 24
• Outer Diameter [mm]: 72
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: KAMOKA

• Driven Units: Camshaft
• Number of Teeth: 121
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.139
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Mechanical
• Name: SEADE-/JUHTRULL,HAMMASRIHM
• Manufacturer: MAX

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 121
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,153
• Name: Hammasrihm
• Manufacturer: GAT

• Filter type: In-Line Filter
• Outer Diameter [mm]: 88
• Height [mm]: 172
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Filter type: Filter Insert
• Diameter [mm]: 84
• Thread Size: M 12 X 1,50
• Height [mm]: 150
• for OE number: 893133511
• Manufacturer: MEAT & DORIA

• Driven Units: Camshaft
• Vehicle configuration line / variant: HSN
• Number of Teeth: 121
• Width [mm]: 18
• Name: HAMMASRIHM
• Manufacturer: DAY

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 31
• Brake System: ATE
• Inner brake drum diameter [mm]: 180
• Manufacturer: LPR
• Name: LPR 00140

• Width [mm]: 20
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 72
• Material: Metal
• Weight [kg]: 0.3
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Braking System: for vehicles without brake force regulator
• Width [mm]: 31
• Outer Diameter [mm]: 180
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Weight [kg]: 1.14
• Manufacturer: FEBI HAMULCE

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Diameter [mm]: 200
• Width [mm]: 40
• Net weight [kg]: 1.54
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Diameter [mm]: 200
• Width [mm]: 40
• Net weight [kg]: 1.59
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: NK

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Supplementary Article/Info 2: with bolts/screws
• Width [mm]: 104.3
• Brake System: TRW
• Thickness [mm]: 15
• Height [mm]: 66.5
• Manufacturer: LPR

• Transmission Type: Automatic Transmission
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 40
• Brake System: VAG
• Inner brake drum diameter [mm]: 200
• Manufacturer: LPR

• Width 1 [mm]: 24
• Outer Diameter 1 [mm]: 72
• Manufacturer: SNR
• Name: SN GT357.01

• Fitting Position: Front Axle
• for model code: 4000/GLE, GTE, Sport, 80/GLE
• Block Separation:
• Construction Year to: 07.1986
• Quantity per packing unit: 4
• FMSI Code: D147-7079
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20574
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 104.2
• Width 2 [mm]: 104.2
• Height 1 [mm]: 67.1
• Height 2 [mm]: 67.1
• Thickness 1 [mm]: 19.1
• Thickness 2 [mm]: 19.1
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP179

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Manual
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• Fitting Position: Front Axle
• Width [mm]: 120
• Thickness [mm]: 17
• Height [mm]: 70
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE

• Quantity per packing unit: 4
• Fitting Position: Front Axle
• Thickness [mm]: 19.5
• Width [mm]: 104.4
• Height [mm]: 66.5
• Brake System: TRW
• Weight [kg]: 1.14
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Thickness [mm]: 7.5
• Friction Surface Width [mm]: 29
• Supplementary Article/Supplementary Info: with accessories
• Brake System: ATE
• Supplementary Article/Info 2: with handbrake lever
• Packaging length [cm]: 19.8
• Packaging width [cm]: 12.5
• Packaging height [cm]: 8.2
• Weight [kg]: 1.1
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: TEX

• Vehicle configuration line / variant: TENS
• Belt Pulley Ø [mm]: 72
• Height 1 [mm]: 20.5
• Height 2 [mm]: 27.5
• Weight [kg]: 0.4
• Manufacturer: DAYCO PASKI

• Outer Diameter [mm]: 72
• Width [mm]: 24
• SVHC: No SVHC present!
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: INA

• Braking System: for vehicles without brake force regulator
• Fitting Position: Rear Axle
• Diameter [mm]: 180
• Width [mm]: 30
• Brake Pad: with lining
• Manufacturer: JP GROUP
• Lisainfo: Brake shoe set, without E-mark, 180x30 mm
• Additional information: Brake shoe set, without E-mark, 180x30 mm

• Fitting Position: Rear Axle
• Width [mm]: 40
• Brake System: Ate/Teves
• Inner brake drum diameter [mm]: 200
• Weight [kg]: 1.45
• Manufacturer: TOMEX BRAKES

• Filter type: In-Line Filter
• Diameter [mm]: 80.5
• Height [mm]: 152
• Thread Size Entry: M12x1,5
• Thread Size Exit: M14x1,5
• Packaging height [cm]: 16
• Net Weight [g]: 331
• Packaging length [cm]: 9
• Packaging width [cm]: 9
• Name: KN KL28
• Manufacturer: KNECHT

• Filter type: In-Line Filter
• Diameter [mm]: 80.5
• Height [mm]: 152
• Thread Size Entry: M12x1,5
• Thread Size Exit: M14x1,5
• Packaging height [cm]: 16
• Net Weight [g]: 331
• Packaging length [cm]: 9
• Packaging width [cm]: 9
• Manufacturer: MAHLE KNECHT

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.2
• Units/Pulleys: incl. tensioner pulley
• for OE number: 051 198 119
• Observe service information:
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Width [mm]: 40
• Brake System: VAG
• Supplementary Article/Info 2: with handbrake lever
• Inner brake drum diameter [mm]: 200
• Manufacturer: BREMBO
• Name: BR S 85 508

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Weight [kg]: 1.58
• Brake System: VAG
• Installation Information: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• for model code: GLE, GTE, Sport
• Quantity per packing unit: 4
• Brake System: V.A.G.
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LS1625

• Number of belts: 1
• Pulleys contained: 1
• Number of Teeth: 121
• Width [mm]: 18
• Tension pulley diameter [mm]: 82.5
• for components see parts list:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.2
• Units/Pulleys: incl. tensioner pulley
• for OE number: 051 198 119
• Observe service information:
• Name: SW 30 02 0040
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 180
• Width [mm]: 31
• Brake Pad: with lining
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: BOS

• Filter type: Spin-on Filter
• Height [mm]: 172
• Outer Diameter [mm]: 81
• Thread Size Entry: M14x1.5
• Thread Size Exit: M14x1.5
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 104.4
• Height [mm]: 66.5
• Thickness [mm]: 19.5
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Brake Pad: with lining
• Brake Size: 200x400
• Manufacturer: BOSCH

• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Filter type: In-Line Filter
• Height [mm]: 176
• Outer Diameter [mm]: 80
• Thread Size 1: M14x1,5
• Thread Size 2: M14x1,5
• Manufacturer: PURFLUX

• Construction Year to: 12.1984
• Block Separation:
• Construction Year from: 01.1985
• Vehicle Identification Number (VIN) to: ******81*H*299000
• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Material: Sheet Steel
• Brake Pad: with lining
• Fitting Position: Rear Axle
• Weight [kg]: 1.55
• Manufacturer: FEBI BILSTEIN

Braking System: for vehicles with reinforced brakes, for vehicles with brake force regulator General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: VAG
• Test Mark: E9 90R-01702/004
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 104.4
• Height [mm]: 66.6
• Thickness [mm]: 15
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Supplementary Article/Info 2: with brake caliper screws
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 18
• Number of Teeth: 121
• Manufacturer: SNR
• Name: SN KD457.01

• Fitting Position: Rear Axle
• Width [mm]: 40
• Supplementary Article/Supplementary Info: with wheel brake cylinder
• Mounting Type: not pre-mounted
• Inner brake drum diameter [mm]: 200
• Name: PIDURIKLOTSIDE KOMPLEKT
• Manufacturer: MAX

• Driven Units: Camshaft
• Vehicle configuration line / variant: KTB
• Number of Teeth: 121
• Width [mm]: 18
• Length [mm]: 1,153
• Number of belts: 1
• Pulleys contained: 1
• Weight [kg]: 0.6
• Manufacturer: DAYCO
• Name: DA KTB265

• Number of Teeth 1: 121
• Width 1 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: INA

• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Number of track rollers: 1
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: BOS

• Number of track rollers: 1
• Number of belts: 1
• Width 1 [mm]: 18
• Number of Teeth: 121
• Manufacturer: SNR
• Name: SN KD457.05

• Driven Units: Camshaft
• Packaging length [cm]: 26.5
• Packaging width [cm]: 16.5
• Packaging height [cm]: 7
• Weight [kg]: 0.64
• Number of Teeth: 121
• Width [mm]: 18
• contains more articles than the OE kit (art. no.): 056 198 119
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: CON

• Belt Width [mm]: 18
• Colour: black
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle
• Brake Disc Type: solid
• Manufacturer Restriction: KELSEY HAYES
• Wear Warning Contact: not prepared for wear warning indicator
• WVA Number: 20887, 20888
• Test Mark: E1 90R-01813/030
• Width [mm]: 137.7
• Thickness [mm]: 19.7
• Height [mm]: 48.6, 53.4
• Manufacturer: BRECK KLOCKI HAMULCOWE

• Fitting Position: Front Axle
• Wear Warning Contact: without integrated wear sensor
• Height 1 [mm]: 69.5
• Brake System: LUCAS/TRW
• Width 1 [mm]: 118.9
• Thickness 1 [mm]: 16.3
• Manufacturer: PROFIPOWER

• Engine Code: DZ
• Width [mm]: 18
• Number of Teeth: 121
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.99
• for OE number: 051 198 119 S2
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Thickness [mm]: 16
• Test Mark: R90 Homologated
• Width [mm]: 119
• Height [mm]: 70
• Weight [kg]: 1.4
• Height 1 [mm]: 70
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Supplementary Info: with accessories
• Brake System: TRW
• Packing Type: Box
• WVA Number: 20168
• Packaging length [cm]: 16.8
• Packaging width [cm]: 12.7
• Packaging height [cm]: 4.7
• Manufacturer: JURID

• for model code: 80
• Number of Teeth: 121
• Width [mm]: 18
• Number of belts: 1
• Weight [kg]: 0.56
• for article number: KD122
• Manufacturer: DOLZ

• Piston Diameter [mm]: 17.5
• Width [mm]: 31
• Outer Diameter [mm]: 180
• Test Mark: ECE R90 Approved
• Mounting Type: Pre-assembled
• Fitting Position: Rear Axle
• Weight [kg]: 1.65
• Manufacturer: FEBI HAMULCE

Supplementary Article/Supplementary Info: with wheel brake cylinder, with accessories, with fastening/mounting material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Width [mm]: 18
• Number of Teeth: 121
• Surface: PTFE (Polytetrafluorethylene) coated
• Belts: with trapezoidal tooth profile
• Weight [kg]: 2.77
• for OE number: 051 198 119 S3
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Piston Diameter [mm]: 17.5
• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Mounting Type: Pre-assembled
• Fitting Position: Rear Axle
• Weight [kg]: 1.65
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Supplementary Info: with wheel brake cylinder, with accessories, with fastening/mounting material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: DZ
• Braking System: for vehicles with reinforced brakes
• Piston Diameter [mm]: 19.1
• Width [mm]: 40
• Outer Diameter [mm]: 200
• Test Mark: ECE R90 Approved
• Mounting Type: Pre-assembled
• Fitting Position: Rear Axle
• Weight [kg]: 2.195
• Manufacturer: FEBI BILSTEIN

Supplementary Article/Supplementary Info: with wheel brake cylinder, with accessories, with fastening/mounting material General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Width [mm]: 18
• Number of Teeth: 121
• Pulleys contained: 1
• Alternatively:
• Manufacturer: HEPU ZESTAWY ROZRZĄDU

• Number of Teeth 1: 121
• Width 2 [mm]: 18
• Observe service information:
• SVHC: No SVHC present!
• Name: Veepump hammasrihmakomplekt
• Manufacturer: INA

• Fitting Position: Rear Axle
• Mounting Type: Pre-assembled
• Adjustment: with automatic adjustment
• Supplementary Article/Supplementary Info: with accessories, with wheel brake cylinder
• Brake Pad: with lining
• Inner brake drum diameter [mm]: 180
• Width [mm]: 30
• Piston Diameter [mm]: 14.3
• Manufacturer: BOSCH HAMULCE

• Fitting Position: Rear Axle
• Quantity per packing unit: 2
• Inner brake drum diameter [mm]: 200
• Width [mm]: 40
• Manufacturer Restriction: VAG
• Mounting Type: Pre-assembled
• Supplementary Article/Supplementary Info: with wheel brake cylinder
• Material: Aluminium
• Test Mark: E1 90R 01195/047
• Piston Diameter [mm]: 15.9
• Manufacturer: TRW

SVHC: No information available, please contact the manufacturer!