Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
Manufacturer: DELLO AUTOMEGA
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Colour: blue
- Mounting Type: Screw Connection
- Thread Type: Internal Thread
- Manufacturer: TOPRAN
- Lisainfo: 103 643 HP
- Additional information: 103 643 HP
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
- Material: Plastic
- Colour: blue
- Lisainfo: Cap for expansion tank
- Additional information: Cap for expansion tank
- Colour: blue
- Material: Plastic
-
Name: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Manufacturer: MAX
- Quantity per packing unit: 4
- Height [mm]: 24
- Weight [kg]: 0.047
- Pressure [bar]: 1.2
- Colour: blue
- Material: Plastic
- Inner Diameter [mm]: 33
- Outer Diameter [mm]: 58
- Weight [g]: 47
- Thread Size 1: M3
- Manufacturer: METALCAUCHO
- Quantity: 1
- Weight [kg]: 0.036
- Required quantity: 1
- Colour: blue
- Material: Plastic
- Opening Pressure [bar]: 1.2
- General Information: cap for expansion tank; blue
- Manufacturer: VIKA
- Quantity: 1
- Weight [kg]: 0.036
- Required quantity: 1
- Colour: black
- Material: Plastic
- Opening Pressure [bar]: 1.2
- General Information: cap for expansion tank; black
- Manufacturer: VIKA
- Colour: blue
- Weight [kg]: 0.089
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: blue
- Pressure [bar]: 1.2
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Quantity: 1
- Weight [kg]: 0.036
- Required quantity: 1
- Colour: yellow
- Material: Plastic
- Opening Pressure [bar]: 1.2
- General Information: radiator cap; yellow
- Manufacturer: VIKA
- Pressure [bar]: 1.3
- Material: Plastic
- Guarantee: 3 years guarantee
- Weight [kg]: 0.04
- Always compare old and new part (in particular OE No.):
- Name: CE 61SKV014
- Manufacturer: ESEN SKV
-
Fabrication Number: CCK-
VW- 008 - Pressure [bar]: 1.2
- Colour: blue
- Manufacturer: NTY
- Material: Plastic
- Opening Pressure [bar]: 1.1
- Weight [kg]: 0.036
- for OE number: 443 121 321
-
Name: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Opening Pressure [bar]: 1.1
- Weight [kg]: 0.036
- for OE number: 443 121 321
- Name: SW 99 90 2269
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Manufacturer: NRF
- Colour: black
- Mounting Type: Screw Connection
- Pressure [bar]: 1.1
- Weight [g]: 34.2
- Packaging length [cm]: 75
- Packaging width [cm]: 75
- Packaging height [cm]: 83
- Manufacturer: MOTORAD
- Thread Type: with internal thread
- Material: Plastic
- Opening Pressure [bar]: 1.4
- Manufacturer: METZGER
- Pressure [bar]: 1.5
-
Name: SULGURKATE,
JAHUTUSVEDELIKU MAHUTI - Manufacturer: VER
- Supplementary Article/Supplementary Info: with coolant level sensor
- Supplementary Article/Info 2: without lid
- for OE number: 4F0121403C
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Supplementary Article/Info 2: without lid
- Article number of recommended accessories: 100 121 0042
-
Name: PAISUPAAK,
JAHUTUSVEDELIK - Manufacturer: MEY
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks