Articles

Filter results
Brand
Fitting Position

Product

Description

In stock

Price

(incl. VAT)

51335
Shaft Seal, intermediate shaft
AIC
  • Required quantity: 1
  • Quantity per packing unit: 10
  • Fitting Position: frontal sided
  • Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

Orderable
22
2.39
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
12012709B
Shaft Seal, countershaft
CORTECO
  • Engine Code: ALG, APR, AQD
  • Block Separation:
  • Vehicle Identification Number (VIN) to: -> 4D2004500
  • Fitting Position: Front
  • Height 1 [mm]: 10
  • Outer Diameter 1 [mm]: 47
  • Inner Diameter 1 [mm]: 32
  • Material: FPM (fluoride rubber)
  • for OE number: 026103085D
  • Swirl Type: Alternating Twist
  • Dust Cover: with dust lip
  • Name: VOLLI RONGASTIHEND, NUKKVOLL
  • Manufacturer: COT
  • Additional information: 12012709
  • Lisainfo: 12012709
Tellitav 1 tp
10
2.45
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Tellitav
26
3.20
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
10
3.60
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
NUP-VW-011
Shaft Seal, camshaft
NTY
  • Fitting Position: frontal sided
  • Observe service information:
  • Swirl Type: Right-hand Twist
  • Material: PTFE (polytetrafluoroethylene)
  • Dust Cover: with dust lip
  • Fabrication Number: NUP-VW-011
  • Manufacturer: NTY
Ord. 2-3 b-days
5
2.56
0 laoseisuga toote tarneaega kindlasti enne tellimist täpsustada 6 599 702, malva@lakiauto.ee.
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
Orderable
12
3.24
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
413 0093 10
Shaft Seal, crankshaft
Schaeffler INA
  • Fitting Position: frontal sided
  • Required quantity: 4
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Width [mm]: 10
  • SVHC: No SVHC present!
  • Manufacturer: INA
  • Name: LU 413009310
Tellitav 1p
279
2.59
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1 tp
8
2.59
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Ord. 1 b-day
10
2.74
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
81-19299-10
Shaft Seal, crankshaft
VICTOR REINZ
  • Required quantity: 4
  • Fitting Position: frontal sided
  • Engine Code: AMX, APR, AQD, ALG, ACK
  • Block Separation:
  • Material: FPM (fluoride rubber)
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Height [mm]: 10
  • Radial Shaft Seal Design: A SL
  • Swirl Type: Alternating Twist
  • Name: VOLLI RONGASTIHEND, NUKKVOLL
  • Manufacturer: REI
  • Lisainfo: 81-19299-10
  • Additional information: 81-19299-10
Tellitav 1p
617
2.61
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1 tp
10
2.68
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Ord. 1 b-day
10
2.70
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Tellitav
26
2.74
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
10
3.16
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
325.155
Shaft Seal, intermediate shaft
ELRING
  • Required quantity: 4
  • Fitting Position: frontal sided, transmission sided
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Height [mm]: 10
  • Radial Shaft Seal Design: ASW
  • Swirl Type: Alternating Twist
  • Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
  • Dust Cover: with dust lip
  • Alternative Repair Kit: 325.156
  • Manufacturer: ELRING
  • Lisainfo: 325.155 ELR
  • Additional information: 325.155 ELR
Tellitav 1p
6720
2.63
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Orderable
50
2.77
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
26
3.22
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
10
3.28
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
15010800
Shaft Seal, intermediate shaft
AJUSA
  • Required quantity: 4
  • Block Separation:
  • Engine Code: ACK, ALG, AMX, AQD, APR
  • Construction Year to: 07.1998, 06.2000
  • Construction Year from: 02.2002, 11.1998
  • Fitting Position: frontal sided
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Height [mm]: 10
  • Swirl Type: Alternating Twist
  • Name: VOLLI RONGASTIHEND, NUKKVOLL
  • Manufacturer: AJU
Tellitav
26
2.82
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
6
9.90
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
V10-3256
Shaft Seal, countershaft
VAICO
  • Required quantity: 4
  • Thickness [mm]: 10
  • for OE number: 068 103 085 E
  • Fitting Position: frontal sided
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Weight [kg]: 0.023
  • Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Orderable
1
2.86
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
109 889
Shaft Seal, intermediate shaft
TOPRAN
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Height [mm]: 10
  • Dust Cover: with dust lip
  • Swirl Type: Alternating Twist
  • Fitting Position: frontal sided
  • Material: FPM (fluoride rubber)/ACM (polyacrylate rubber)
  • Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

Ord. 1 b-day
10
2.94
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
OS8325
Shaft Seal, camshaft
BGA
  • Engine Code: AMX
  • Vehicle Identification Number (VIN) from: 4D-2-004 501
  • Fitting Position: frontal sided
  • Height [mm]: 10
  • Inner Diameter [mm]: 47
  • Outer Diameter [mm]: 32
  • Manufacturer: BGA
  • Lisainfo: OS8325 BGA
  • Additional information: OS8325 BGA

Material: NBR (nitrile butadiene rubber), PTFE (polytetrafluoroethylene)

Orderable
50
3.16
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1p
17
3.36
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
11031792701
Seal Cap, camshaft
vika
  • Thickness [mm]: 14.8
  • Weight [kg]: 0.02
  • General Information: end cap
  • Manufacturer: VIKA
Orderable
7
3.10
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
DRM0697
Seal Cap, camshaft
Dr.Motor Automotive
  • Name: Sulgurkate,nukkvoll
  • Manufacturer: DRM

Brief Information: Always compare old and new part (in particular OE No.)

Tellitav 1 tp
10
3.28
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Tellitav
15
3.28
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Orderable
2
3.73
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1p
2
3.79
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Ord. 1 b-day
10
5.52
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
325.156
Shaft Seal, intermediate shaft
ELRING
  • Required quantity: 4
  • Fitting Position: frontal sided, transmission sided
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Height [mm]: 10
  • Radial Shaft Seal Design: ASW
  • Swirl Type: Alternating Twist
  • Material: FPM (fluoride rubber)
  • Dust Cover: with dust lip
  • Alternative Repair Kit: 325.155
  • Manufacturer: ELRING
Tellitav 1p
568
3.57
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Orderable
40
3.73
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Ord. 1 b-day
10
4.06
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
V10-3263
Shaft Seal, oil pump, drive shaft (oil pump)
VAICO
  • Engine Code: ACK
  • Inner Diameter [mm]: 35
  • Thickness [mm]: 10
  • Outer Diameter [mm]: 48
  • Fitting Position: frontal sided
  • for OE number: 054 115 147 B
  • Weight [kg]: 0.02
  • Material: FPM (fluoride rubber)
  • Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Orderable
2
4.90
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
215.870
Seal Cap, camshaft
ELRING
  • Required quantity: 2
  • Quantity per packing unit: 10
  • Manufacturer: ELRING
Tellitav 1p
124
5.24
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Orderable
39
5.37
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Ord. 1 b-day
10
5.95
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Tellitav
12
6.28
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Additional information OE codes Linked vehicles
OS1320
Shaft Seal, crankshaft
FAI AutoParts
  • Engine Code: AMX
  • Fitting Position: frontal sided
  • for OE number: MN980030
  • Height [mm]: 10
  • Material: PTFE (polytetrafluoroethylene)
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Rotation Direction: Clockwise rotation
  • Manufacturer: FAI
Tellitav 1p
27
6.36
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
32255
Seal Cap, camshaft
FEBI BILSTEIN
  • Thickness [mm]: 14.8
  • Weight [kg]: 0.02
  • Name: SULGURKATE,NUKKVOLL
  • Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Orderable
13
7.45
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1p
103
7.58
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
1
7.89
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Ord. 1 b-day
10
8.07
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Ord. 1 b-day
10
8.98
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
B18729
Shaft Seal, camshaft
Borsehung
  • Fitting Position: Axle beam
  • General Information: shaft oil seal
  • Manufacturer: BORSEHUNG
Orderable
1
7.88
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
22
8.13
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Tellitav 1p
13
8.39
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
38238
Shaft Seal, crankshaft
FEBI BILSTEIN
  • Engine Code: AMX, AQD, APR
  • Vehicle Identification Number (VIN) from: ******4B*2*004501
  • Thickness [mm]: 10
  • Inner Diameter [mm]: 32
  • Outer Diameter [mm]: 47
  • Rotation Direction: Clockwise rotation
  • Material: ACM (Polyacrylate), PTFE (polytetrafluoroethylene)
  • Supplementary Article/Info 2: with mounting sleeve
  • Fitting Position: frontal sided
  • Weight [kg]: 0.01
  • Observe service information:
  • Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

Tellitav 1p
23
8.31
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Ord. 1 b-day
10
8.87
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
19037038B
Shaft Seal, intermediate shaft
CORTECO
  • Engine Code: APR, AQD
  • Fitting Position: Rear, Engine
  • Supplementary Article/Info 2: with mounting sleeves
  • Height 1 [mm]: 10
  • Outer Diameter 1 [mm]: 47
  • Inner Diameter 1 [mm]: 32
  • Swirl Type: Left-hand Twist
  • Dust Cover: with dust lip
  • Name: CO 19037038
  • Manufacturer: CORTECO

Material: PTFE (polytetrafluoroethylene)/ACM (polyacrylate rubber)

Tellitav 1 tp
5
11.90
Kaup on euroopa kesklaos. Tarne 2 tööpäeva LakiAuto lattu. Tellimus läheb 17.00 Saabub meie lattu alates 15.00
Additional information OE codes Linked vehicles
V10-3275
Shaft Seal, oil pump
VAICO
  • Engine Code: AMX, AQD, APR
  • Vehicle Identification Number (VIN) from: 4D-Y-001 501
  • for OE number: 03G 105 021 C
  • Thickness [mm]: 10
  • Inner Diameter [mm]: 35
  • Fitting Position: frontal sided
  • Outer Diameter [mm]: 48
  • Weight [kg]: 0.031
  • Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Orderable
3
20.29
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
26
22.67
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Additional information OE codes Linked vehicles
V10-3274
Shaft Seal, countershaft
VAICO
  • Outer Diameter [mm]: 47
  • Thickness [mm]: 10
  • Inner Diameter [mm]: 32
  • Fitting Position: transmission sided
  • Weight [kg]: 0.195
  • Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

Orderable
2
22.48
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav
5
25.77
Kaup on euroopa kesklaos. Tellimuse saadame 17.00
Additional information OE codes Linked vehicles
54-0679
Control Valve, camshaft adjustment
MAXGEAR
  • Fitting Position: Left
  • Name: PINGUTI, MOOTORIKETT
  • Manufacturer: MAX
Ord. 1 b-day
3
129.53
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
54-0678
Control Valve, camshaft adjustment
MAXGEAR
  • Fitting Position: Right
  • Number of pins: 2
  • Name: PINGUTI, MOOTORIKETT
  • Manufacturer: MAX
Ord. 1 b-day
2
142.06
Kaup on euroopa kesklaos. Tellimus tööpäeviti enne 17.00
Additional information OE codes Linked vehicles
1111251000
Control Valve, camshaft adjustment
JP GROUP
  • Fitting Position: Right, to cylinder 1, to cylinder 2, to cylinder 3
  • Manufacturer: JP GROUP
  • Lisainfo: Camshaft Adjuster
  • Additional information: Camshaft Adjuster
In Tallinn
0
152.69
Tellimus kolmapäeval 12.00 , saabub järgmisel kolmapäeval.
Orderable
25+
152.69
Tellimus kolmapäeval 12.00 , saabub esmaspäeval.
Orderable
1
194.46
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1p
3
195.92
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
1111250900
Control Valve, camshaft adjustment
JP GROUP
  • Fitting Position: Left, to cylinder 4, to cylinder 5, to cylinder 6
  • Lisainfo: Camshaft Adjuster
  • Additional information: Camshaft Adjuster
In Tallinn
0
154.53
Tellimus kolmapäeval 12.00 , saabub järgmisel kolmapäeval.
Orderable
25+
154.53
Tellimus kolmapäeval 12.00 , saabub esmaspäeval.
Additional information OE codes Linked vehicles
VVS236
Control Valve, camshaft adjustment
GATES
  • Fitting Position: Cylinder Head, Inlet
  • Number of pins: 2
  • Pin Shape: Flat
  • Plug Type: Male
  • Material: Metal
  • Length [mm]: 165
  • Width [mm]: 125
  • Height [mm]: 102
  • Manufacturer: GATES
Orderable
3
213.98
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1p
13
215.64
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Ord. 1 b-day
5
240.50
Kaup on euroopa kesklaos. Tarne 1 tööpäev LakiAuto lattu. Tellimused hiljemalt 17.00
Additional information OE codes Linked vehicles
554025A
Control Valve, camshaft adjustment
ERA
  • Supplementary Article/Supplementary Info: with gaskets/seals
  • Number of connectors: 2
  • Connector Shape: rectangular
  • Manufacturer: ERA
Orderable
1
261.53
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles
VVS235
Control Valve, camshaft adjustment
GATES
  • Fitting Position: Cylinder Head, Outlet
  • Number of pins: 2
  • Pin Shape: Flat
  • Plug Type: Male
  • Material: Metal
  • Length [mm]: 165
  • Width [mm]: 112
  • Height [mm]: 102
  • Manufacturer: GATES
Orderable
4
277.53
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Tellitav 1p
13
279.67
Kaup on euroopa kesklaos. Tellimus tööpäeviti kell 17.00
Additional information OE codes Linked vehicles