Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 82
- Height [mm]: 81
- for OE number: 431407283B
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8094
- Additional information: D8094 AUT
- Lisainfo: D8094 AUT
-
Fitting Position: Front Axle,
Wheel Side - Outer Diameter [mm]: 22
- for shaft diameter [mm]: 82
- Supplementary Article/Info 2: with clamps
-
Fabrication Number: NOP-
070 - Manufacturer: NTY
for article number: NPZ-AR-005, NPZ-AU-046, NPZ-KA-349, NPZ-PL-024, NPZ-VW-001, NPZ-VW-012, NPZ-VW-015, NPZ-VW-008
-
Fitting Position: Wheel Side,
Front Axle - Inner Diameter [mm]: 22
- for shaft diameter [mm]: 82
- Supplementary Article/Info 2: with clamps
-
Fabrication Number: NOP-
006 - Manufacturer: NTY
for article number: NPZ-AU-021, NPZ-CT-019, NPZ-VW-005, NPZ-VW-012, NPZ-VW-034
Tavatellimus saadetakse E, K ja R kell 14:00. Kaup saabub kuni 3'e tööpäevaga. Tavatellimusse lähevad ainult positiivse laojäägiga tooted. Lisaks tavatellimusele on võimalik tellida ka Express kulleriga (24h). Kulleri hinda täpsusta 6 599 702, malva@lakiauto.ee.
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 82
- Height [mm]: 81
- Version: ELASTIC
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8094E
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 81
- Height [mm]: 130
- Version: UNIVERSAL BOOT KIT
- Manufacturer: AUTOFREN SEINSA
- Name: SE D8000E
- Additional information: D8000E
- Lisainfo: D8000E
- for OE number: A9913370085
- Fitting Position: transmission sided
- Material: Rubber
- Weight [g]: 170
- Length [mm]: 120
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Name: IM 30663
- Manufacturer: ORIGINAL IMPERIUM
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right -
Transmission Type: Manual Transmission,
Automatic Transmission - Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 84
- Height [mm]: 83
-
Bellows Material: NBR
(nitrile butadiene rubber) - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Vehicle Identification Number (VIN) to: ******44*J*200099
- Length [mm]: 83
- Material: Rubber
-
Fitting Position: Front Axle,
Wheel Side - Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 84
- Weight [kg]: 0.43
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: Manual Transmission,
Automatic Transmission - Length [mm]: 106
-
Material: Polychloroprene
(Neoprene) - for OE number: 431498201D
- Inner Diameter 1 [mm]: 56.5
- Inner Diameter 2 [mm]: 25
- Manufacturer: GSP
Fitting Position: transmission sided, Front Axle Left, Front Axle Right
-
Fitting Position: transmission sided,
Front Axle - Length [mm]: 129
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Manufacturer: JPN
- Length [mm]: 130
- Inner Diameter [mm]: 62
-
Outer Diameter [mm]: 94,
86, 78, 66, 38, 32, 28, 24 - Material: Rubber
-
Fitting Position: Front Axle,
Rear Axle - Weight [kg]: 0.27
- Inner Diameter 3 [mm]: 74
- Supplementary Article/Info 2: with clamps
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Identification Number (VIN) from: 44J200100
- Vehicle Identification Number (VIN) to: 44K300000
-
Transmission Type: 3-
Speed Automatic Transmission, Fully Automatic -
Fitting Position: Front Axle,
Wheel Side - Braking/Driving Dynamics: for vehicles with ABS
- Height [mm]: 146
- Joint Type: Universal Joint
- Supplementary Article/Info 2: with clamps
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 86
- Manufacturer: SKF
- Name: SK VKJP01001
Lisainfo: VKJP 01001 SKF Kõrgus [mm]: 132 Siseläbimõõt 1 [mm]: 20 Siseläbimõõt 2 [mm]: 81 Additional information: VKJP 01001 SKF Kõrgus [mm]: 132 Siseläbimõõt 1 [mm]: 20 Siseläbimõõt 2 [mm]: 81
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 from [mm]: 19
- Inner Diameter 1 to [mm]: 23
- Inner Diameter 2 from [mm]: 69
- Inner Diameter 2 to [mm]: 79
- Height [mm]: 100
- New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: GKN
General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
-
Fitting Position: Front Axle,
Wheel Side - Height [mm]: 79
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 83
- Manufacturer: SKF
- Name: SK VKJP1017
-
Fitting Position: Wheel Side,
Front Axle Left, Front Axle Right - Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 72
- Height [mm]: 97
- Name: SN OBK10.005
- Manufacturer: SNR
- Length [mm]: 126
-
Outer Diameter [mm]: 21,
60, 72, 82, 83 - Material: Rubber
-
Fitting Position: Front Axle,
Rear Axle - Height [mm]: 126
- Weight [kg]: 0.26
- Supplementary Article/Info 2: with clamps
- Observe service information:
- Manufacturer: FEBI BILSTEIN
- Lisainfo: 27730 FEBI
- Additional information: 27730 FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Model Year from: 1983
- Fitting Position: transmission sided
- Length [mm]: 122
- Weight [kg]: 0.4
-
Material: NBR
(nitrile butadiene rubber) - Joint Type: CV Joint
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Packaging length [cm]: 12
- Packaging width [cm]: 11
- Packaging height [cm]: 11
- Manufacturer: FEBEST
-
Fitting Position: Wheel Side,
Front Axle - Inner Diameter 1 from [mm]: 22
- Inner Diameter 1 to [mm]: 29
- Inner Diameter 2 from [mm]: 72
- Inner Diameter 2 to [mm]: 84
- Height [mm]: 97
- Material: Rubber
- Joint Type: Universal Joint
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 72
- Manufacturer: SKF
- Name: SK VKJP01013
- Lisainfo: VKJP 01013 SKF
- Additional information: VKJP 01013 SKF
- Material: Rubber
-
Fitting Position: transmission sided,
Rear Axle, Front Axle - Full Set:
- for OE number: 8D0 498 201
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Identification Number (VIN) from: 44J200100
- Vehicle Identification Number (VIN) to: 44K300000
-
Transmission Type: 3-
Speed Automatic Transmission, Fully Automatic -
Fitting Position: Front Axle,
Wheel Side - Braking/Driving Dynamics: for vehicles with ABS
- Inner Diameter 1 from [mm]: 23
- Inner Diameter 1 to [mm]: 30
- Inner Diameter 2 from [mm]: 77
- Inner Diameter 2 to [mm]: 89
- Height [mm]: 105
- Material: Rubber
- Joint Type: Universal Joint
- Inner Diameter 1 [mm]: 23
- Inner Diameter 2 [mm]: 77
- Manufacturer: SKF
- Name: SK VKJP01015
-
Transmission Type: Manual Transmission,
Automatic Transmission - Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Height [mm]: 124
- Supplementary Article/Info 2: with cap
- Joint Type: Flexible Joint Disc
- Bore Diameter [mm]: 10.4
- Number of bores: 6
- Bolt Hole Circle Ø [mm]: 94
- Thread Size: M10x1.5x48
-
Bellows Material: Rubber/
Metal - New Part:
- Supplementary Article/Supplementary Info: with grease
- Manufacturer: LOBRO
Fitting Position: transmission sided, Front Axle Left, Front Axle Right General Information: Product information The products supplied by us are to be used exclusively for their intended purpose. Installation may only be carried out by trained specialists; installation instructions are generally not supplied. When installing our products, only new fastening material (screws and their components) of the quality specified by the vehicle manufacturer may be used. The procedures required for fastening our products during repairs must always be carried out in accordance with the vehicle manufacturer's specifications and the corresponding tightening torques and tightening procedures must be used.
- Fitting Position: Wheel Side
- Inner Diameter 1 [mm]: 22
- Inner Diameter 2 [mm]: 80
- Height [mm]: 82
- Manufacturer: 3RG
-
Fitting Position: transmission sided,
Front Axle - Length [mm]: 129
- Material: Rubber
- Inner Diameter 1 [mm]: 24
- Weight [kg]: 0.44
- Inner Diameter 2 [mm]: 108
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Fitting Position: Front Axle,
transmission sided - Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Length [mm]: 120
- Material: Rubber
- SVHC: No SVHC present!
- Manufacturer: FAG
-
Fitting Position: transmission sided,
Front Axle - Height [mm]: 120
- Inner Diameter 1 [mm]: 24
- Inner Diameter 2 [mm]: 108
- Manufacturer: SKF
- Name: SK VKJP6505
-
Outer Diameter [mm]: 27,
75, 92, 100, 108, 116 - Material: Rubber
-
Fitting Position: Front Axle,
Rear Axle - Height [mm]: 151
- Weight [kg]: 0.23
- Supplementary Article/Info 2: with clamps
- Observe service information:
- Manufacturer: FEBI
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Transmission Type: Manual Transmission,
Automatic Transmission - Material: Rubber
- for OE number: 443 498 201 B
-
Fitting Position: transmission sided,
Rear Axle, Front Axle - Full Set:
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks