• Brake Type: Disc Brake
• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.75
• Height 2 [mm]: 17
• Lisainfo: Wheel bearing kit, rear, for one wheel
• Additional information: Wheel bearing kit, rear, for one wheel

• Construction Year to: 12.1986
• Vehicle Identification Number (VIN) to: 44-G-033 840
• Fitting Position: Rear Axle
• Outer Diameter [mm]: 75
• Inner Diameter [mm]: 42
• Width [mm]: 37
• Braking System: for vehicles with disc brakes on the rear axle
• Lisainfo: Wheel bearing, rear, 1 wheel
• Additional information: Wheel bearing, rear, 1 wheel

• Outer Diameter 1 [mm]: 58
• Outer Diameter 2 [mm]: 52
• Height [mm]: 7.5
• Fitting Position: Rear Axle both sides
• Inner Diameter [mm]: 40
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Thickness [mm]: 6.2, 7.5
• Inner Diameter [mm]: 40
• Outer Diameter [mm]: 52
• Material: NBR (nitrile butadiene rubber)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.012
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Bearing Type: Tapered Roller Bearing
• Name: Rattalaager
• Manufacturer: MAX

• Fitting Position: Front Axle both sides, inner
• Manufacturer: JP GROUP
• Lisainfo: Wheel bearing, front, inner
• Additional information: Wheel bearing, front, inner

• Height [mm]: 14.7
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50.3
• Fitting Position: Front Axle
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Rear Axle
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Quality class: PJ
• Name: Wheel bearing kit

• Supplementary Article/Info 2: without wheel hub
• Fitting Position: Rear Axle, Rear Axle Left, Rear Axle Right
• Fabrication Number: KLT-AU-001
• Manufacturer: NTY
• Name: NTY KLT-AU-001

• Braking System: for vehicles with drum brakes on the rear axle
• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 16
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Bearing Type: Roller Bearing
• Manufacturer: DELLO AUTOMEGA

• Alternative Repair Kit: 100 598 0101, 100 598 0101/SK
• Fitting Position: Rear Axle, inner
• Inner Diameter [mm]: 29
• Outer Diameter [mm]: 50
• Height [mm]: 14.73
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Braking System: for vehicles with drum brakes on the rear axle
• Fitting Position: Rear Axle both sides
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Manufacturer: JPN

• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with shaft seal
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL

• Fitting Position: Rear Axle Left, Rear Axle Right
• Width 1 [mm]: 16
• Width 2 [mm]: 14
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Inner Diameter 1 [mm]: 19
• Inner Diameter 2 [mm]: 29
• Manufacturer: GSP

• Fitting Position: Rear Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Fitting Position: Rear Axle
• Inner Diameter [mm]: 19
• Outer Diameter [mm]: 45
• Height [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

Alternative Repair Kit: 100 598 0002, 100 498 0023, 014 033 0048, 714 502 0006, 614 750 0009

• Fitting Position: Rear Axle
• Width 1 [mm]: 15
• Width 2 [mm]: 16
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Rear Axle
• Width [mm]: 14.7
• Inner Diameter [mm]: 19.1
• Outer Diameter [mm]: 45.2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Outer Diameter 1 [mm]: 50.3
• Inner Diameter 1 [mm]: 29
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: OPT

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Weight [kg]: 0.234
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Inner Diameter 1 [mm]: 19
• Outer Diameter 1 [mm]: 45
• Width 1 [mm]: 15
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50
• Width 2 [mm]: 16
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Width 2 [mm]: 15
• Outer Diameter 2 [mm]: 45
• Weight [kg]: 0.34
• Manufacturer: ABS

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle configuration line / variant: REAR LR+RE LR+RE
• Inner Diameter [mm]: 29
• Inner Diameter 2 [mm]: 19
• Width 1 [mm]: 14
• Width 2 [mm]: 45
• Number of mounting bores: 1
• Name: DA KWD1150
• Manufacturer: DAYCO

• Outer Diameter 1 [mm]: 50
• Width 1 [mm]: 14
• Fitting Position: Rear Axle Right
• Manufacturer: SNR
• Name: SN R157.12

• Fitting Position: Rear Axle
• Width [mm]: 15.49
• Inner Diameter [mm]: 19.05
• Outer Diameter 1 [mm]: 50.29
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Bearing Type: Tapered Roller Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Outer Diameter 1 [mm]: 45
• Outer Diameter 2 [mm]: 50
• Width 1 [mm]: 15.5
• Width 2 [mm]: 14
• Inner Diameter 1 [mm]: 19
• Weight [kg]: 0.234
• Inner Diameter 2 [mm]: 29
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 30 85 0008
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter 1 [mm]: 19.1
• Outer Diameter 1 [mm]: 45.2
• Width 1 [mm]: 16.6
• Inner Diameter 2 [mm]: 29
• Outer Diameter 2 [mm]: 50.3
• Width 2 [mm]: 14.7
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG
• Lisainfo: 713 6102 40 FAG
• Additional information: 713 6102 40 FAG

• Brake Type: Disc Brake
• Fitting Position: Rear Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Outer Diameter 1 [mm]: 50
• Outer Diameter 2 [mm]: 45
• Height 1 [mm]: 14.73
• Height 2 [mm]: 17
• Bearing Type: Tapered Roller Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Rear Axle
• Required quantity: 2
• Width 1 [mm]: 14.2
• Width 2 [mm]: 15.5
• Supplementary Article/Info 2: with shaft seal
• Outer Diameter 1 [mm]: 50.3
• Outer Diameter 2 [mm]: 45.2
• Inner Diameter 1 [mm]: 29
• Inner Diameter 2 [mm]: 19
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Quantity: 2
• Fitting Position: Rear
• General Information: Wheel bearing; rear; with repair kit
• Manufacturer: VIKA

• Construction Year to: 09.1985
• Vehicle Identification Number (VIN) to: 44G033840
• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Vehicle Equipment: for vehicles without power steering
• Width [mm]: 37
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75.1
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 44-J-200 100
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Manufacturer: DELLO AUTOMEGA

• Transmission Type: Manual Transmission
• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) from: 44-J-200 100
• Vehicle Identification Number (VIN) to: 44-M-050 000
• Fitting Position: Front Axle both sides
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 45
• Inner Diameter 2 [mm]: 42.8
• Width [mm]: 37
• Bearing Type: Angular Ball Bearing
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 12.1986
• Vehicle Identification Number (VIN) to: 44-G-033 840
• Fitting Position: Front Axle, Rear Axle
• Alternative Repair Kit: 300 334 1102/S
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Width [mm]: 14.7, 17
• Inner Diameter [mm]: 29, 19
• Outer Diameter [mm]: 50.3, 45
• Fitting Position: Rear Axle Left, Rear Axle Right
• Manufacturer: METZGER

• Vehicle Identification Number (VIN) to: ******44*G*033840
• Width [mm]: 37
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.57
• Name: RATTALAAGER
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) from: 44J200100
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle, Rear Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Name: Rattalaagrikomplekt
• Manufacturer: MAX

• Fitting Position: Front Axle
• Transmission Type: Manual Transmission
• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) from: 44J200100
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: DENCKERMANN PIASTY LOZYSKA KOL

• Fitting Position: Front Axle Left, Front Axle Right
• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 82
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Manufacturer: GSP

• Fitting Position: Front Axle
• Vehicle Equipment: for vehicles without power steering
• Construction Year to: 09.1985
• Vehicle Identification Number (VIN) to: 44G033840
• Width [mm]: 37
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75.1
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Construction Year from: 01.1988
• Fitting Position: Front Axle
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) from: 44J200100
• Transmission Type: Manual Transmission
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Quality class: PJ
• Name: Wheel bearing kit

• Transmission Type: Manual Transmission
• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) from: 44J200100
• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 82
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Fitting Position: Front Axle
• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) from: 44J200100
• Transmission Type: Manual Transmission
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter 1 [mm]: 82
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Construction Year to: 12.1986
• Vehicle Identification Number (VIN) to: F 44-G-033 840
• Fitting Position: Rear Axle, Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) from: 44J200100
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Required quantity: 2
• Manufacturer: DRIVE

• Vehicle Identification Number (VIN) to: ******44*G*033840
• Width [mm]: 37
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.73
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Name: SW 30 90 3622
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 44-J-200 100
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle both sides
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: JPN

• Vehicle Identification Number (VIN) to: ******44*G*033840
• Width [mm]: 37
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 0.73
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Manufacturer: FEBI BILSTEIN JR.

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle both sides, Front Axle, Rear Axle
• Transmission Type: Manual Transmission
• Guarantee: 4 years guarantee
• Weight [kg]: 1.87
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV438

• Construction Year from: 09.1985
• Construction Year to: 12.1987
• Vehicle Identification Number (VIN) from: 44G033841
• Vehicle Identification Number (VIN) to: 44J200099
• Vehicle Equipment: for vehicles without power steering
• Fitting Position: Front Axle
• Width [mm]: 37
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 82
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MAX

• Fitting Position: Front Axle
• Width [mm]: 37
• Weight [kg]: 0.84
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: METALCAUCHO

• Fitting Position: Front Axle
• Construction Year from: 09.1985, 01.1988
• Construction Year to: 12.1987
• Vehicle Identification Number (VIN) from: 44-G-033841
• Vehicle Identification Number (VIN) to: 44-J-200099
• Block Separation:
• Transmission Type: 3-Speed Automatic Transmission
• Width [mm]: 37
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 82
• Manufacturer: OPTIMAL

Vehicle Equipment: for vehicles without power steering, for vehicles with power steering

• Fitting Position: Front Axle Left, Front Axle Right
• Vehicle configuration line / variant: FRRE LR+FR LR+FR
• Inner Diameter [mm]: 43
• Width 1 [mm]: 37
• Number of mounting bores: 1
• Name: DA KWD1060
• Manufacturer: DAYCO

• Vehicle Identification Number (VIN) from: ******44*J*200100
• Transmission Type: Manual Transmission
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.036
• Supplementary Article/Supplementary Info: with drive shaft bolt
• Supplementary Article/Info 2: with bolts/screws, with nut
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) from: 44-J-200100
• Transmission Type: Manual Transmission
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Inner Diameter 2 [mm]: 45
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Construction Year to: 09.1985
• Vehicle Identification Number (VIN) to: 44G033840
• Vehicle Equipment: for vehicles without power steering
• Width [mm]: 37
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Construction Year from: 01.1988
• Alternative Repair Kit: 100 498 0037
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGER
• Manufacturer: MEY

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: F 44-G-033 841
• Supplementary Article/Supplementary Info: with fastening/mounting material
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Right, Front Axle
• Manufacturer: SNR /NTN-SNR/
• Name: SN R157.11

• Fitting Position: Right, Front Axle
• Manufacturer: SNR /NTN-SNR/

• Construction Year from: 01.1988
• Vehicle Identification Number (VIN) from: 44J200100
• Transmission Type: Manual Transmission
• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: SKF

• Fitting Position: Front Axle Left, Front Axle Right
• Transmission Type: Manual Transmission
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Weight [kg]: 0.84
• Outer Diameter 1 [mm]: 82
• Width 1 [mm]: 37
• Manufacturer: ABS

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) to: 44-G-033840
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75.1
• Width [mm]: 37
• SVHC: No SVHC present!
• Manufacturer: FAG

• Vehicle Identification Number (VIN) from: 44-J-200100
• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with fastening/mounting material, with accessories
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Thread Size: M16x1,5x77
• Bearing Type: Ball Bearing
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: MEY

General Information: With mounting materials, to fit most models. Please check fit accuracy before installation.

• Fitting Position: Right, Front Axle
• Manufacturer: SNR
• Name: SN R157.18

• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 37
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 09.1985
• Vehicle Identification Number (VIN) to: 44G033840
• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Equipment: for vehicles without power steering
• Width [mm]: 37
• Inner Diameter [mm]: 42
• Outer Diameter [mm]: 75.1
• Manufacturer: SKF

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 44-J-200100
• Transmission Type: Manual Transmission
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 37
• SVHC: No SVHC present!
• Name: RATTALAAGRIKOMPLEKT
• Manufacturer: FAG

• Construction Year from: 01.1988
• Fitting Position: Front Axle
• Required quantity: 2
• Transmission Type: Manual Transmission
• Vehicle Identification Number (VIN) from: 44J200100
• Weight [kg]: 1.056
• Packaging length [cm]: 10.9
• Packaging width [cm]: 8.4
• Packaging height [cm]: 10.9
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Width [mm]: 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ