• Filter type: Spin-on Filter
• Height [mm]: 152
• Outer Diameter 1 [mm]: 81
• Outer Diameter 2 [mm]: 86
• Manufacturer: JP GROUP
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Fitting Position: Rear Axle
• Brake System: Lucas
• Height [mm]: 67.5
• Width [mm]: 88
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, rear, 16.6 mm
• Additional information: Brake pad set, rear, 16.6 mm

• Fitting Position: Front Axle
• Brake System: Lucas
• Height [mm]: 69.5
• Width [mm]: 119
• Thickness [mm]: 19.6
• Wear Warning Contact: with integrated wear warning contact
• Manufacturer: JP GROUP
• Lisainfo: Brake pad set, front, 19.6 mm, with wear indicator
• Additional information: Brake pad set, front, 19.6 mm, with wear indicator

• Fitting Position: Front Axle
• Width [mm]: 119
• Thickness [mm]: 19
• Height [mm]: 70
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas - TRW
• Manufacturer: KAMOKA UK£ADY HAMULCOWE
• Additional information: KAOJQ1011550
• Lisainfo: KAOJQ1011550

• Filtritüüp: Ühendusfilter
• Kütusesüsteemi seadmed: Bensiini sissepritse
• Üldine informatsioon: fuel filter; gasoline
• Manufacturer: VIKA

• Filter type: In-Line Filter
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Height [mm]: 125
• Fuel Type: Petrol
• Outer Diameter [mm]: 48
• Manufacturer: KAMOKA

• Construction Year to: 07.1988
• Engine Code: NE
• Filter type: In-Line Filter
• Height [mm]: 116
• Outer Diameter [mm]: 51
• Outer Diameter 1 [mm]: 44
• Inlet Ø [mm]: 6
• Outlet Ø [mm]: 6
• Manufacturer: VALEO

• Engine Code: NE
• Construction Year to: 07.1988
• Filter type: In-Line Filter
• Diameter [mm]: 48
• Height [mm]: 117.5
• Inlet Ø [mm]: 7.2
• Outlet Ø [mm]: 7.2
• Manufacturer: BOSCH
• Name: BS F026403169

• Engine Code: PM, JN, NE
• Construction Year to: 08.1991
• Number of Teeth: 121
• Length [mm]: 1,153
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: BOS

• Outer Diameter [mm]: 72
• Width [mm]: 20
• Lisainfo: Tension pulley for timing belt
• Additional information: Tension pulley for timing belt

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 0.5
• for OE number: 056 109 119 A
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Height [mm]: 152
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 86
• Entry Thread Size: M 14 X 1.5
• Exit Thread Size: M 12 X 1.5
• Name: Ktusefilter
• Manufacturer: MAX

• Engine Code: JN, PM
• Construction Year from: 02.1987, 08.1990
• Construction Year to: 07.1990, 08.1991
• Vehicle Identification Number (VIN) from: 89..H..300001
• Block Separation:
• Fuel Mixture Formation: Petrol Injection
• Filter type: In-Line Filter
• Diameter [mm]: 88
• Inner Diameter 1 [mm]: 81
• Height [mm]: 152
• Name: KšTUSEFILTER
• Manufacturer: MAX

• Driven Units: Camshaft
• Vehicle configuration line / variant: CR
• Number of Teeth: 121
• Width [mm]: 18
• Name: HAMMASRIHM
• Manufacturer: DAY

• Kõrgus (mm): 152
• Välisläbimõõt [mm]: 81
• Filtritüüp: Ühendusfilter
• Välisläbimõõt 1 [mm]: 86
• keermemõõt, sissepääs: M 14 X 1.5
• keermemõõt, väljapääs: M 12 X 1.5
• Manufacturer: DRIVE

• Kõrgus (mm): 152
• Välisläbimõõt [mm]: 81
• Välisläbimõõt 1 [mm]: 86
• keermemõõt, sissepääs: M 14 X 1.5
• keermemõõt, väljapääs: M 12 X 1.5
• Filtritüüp: Filtrer
• Name: BM FE1904
• Manufacturer: BREMSI

• Width [mm]: 24
• Outer Diameter [mm]: 72
• Supplementary Article/Supplementary Info: without accessories
• Manufacturer: KAMOKA

• Driven Units: Camshaft
• Number of Teeth: 121
• Packaging length [cm]: 25.5
• Packaging width [cm]: 16
• Packaging height [cm]: 3
• Weight [kg]: 0.139
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Name: HAMMASRIHM
• Manufacturer: CON

• Quantity: 1
• Filtritüüp: Ühendusfilter
• Läbimõõt [mm]: 88
• Kõrgus (mm): 152
• Kütusesüsteemi seadmed: Bensiini sissepritse
• Läbimõõt 1 (mm): 81
• Üldine informatsioon: fuel filter; gasoline
• Manufacturer: VIKA

• Construction Year to: 08.1991
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Tensile Cord Material: Fiberglass
• Belt Material: Polychloroprene (Neoprene)
• Colour: black
• Number of Teeth: 121
• Width [mm]: 18
• Tooth Pitch [mm]: 9.525
• Length [mm]: 1,153
• Name: Hammasrihm
• Manufacturer: GAT

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Mechanical
• Name: SEADE-/JUHTRULL,HAMMASRIHM
• Manufacturer: MAX

• Filter type: In-Line Filter
• Height [mm]: 170
• Outer Diameter [mm]: 84
• Entry Thread Size: M14 x 1,5
• Exit Thread Size: M12 x 1,5
• Name: KšTUSEFILTER
• Manufacturer: ALC

• Filter type: In-Line Filter
• Outer Diameter [mm]: 88
• Height [mm]: 172
• Lisainfo: Fuel filter
• Additional information: Fuel filter

• Width [mm]: 20
• Inner Diameter [mm]: 10
• Outer Diameter [mm]: 72
• Material: Metal
• Weight [kg]: 0.3
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 72
• Supplementary Article/Supplementary Info: without fastening/mounting material
• Height [mm]: 20
• Inner Diameter [mm]: 10
• Quantity Unit: Piece
• reinforced version:
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: MEY

• Driven Units: Camshaft
• Vehicle configuration line / variant: HSN
• Number of Teeth: 121
• Width [mm]: 18
• Name: HAMMASRIHM
• Manufacturer: DAY

• Engine Code: PM
• Filter type: In-Line Filter
• Outer Diameter 1 [mm]: 80
• Thread Size 1: M12 x 1,5
• Thread Size: M14 x 1,5
• Height [mm]: 155
• Manufacturer: KOLBENSCHMIDT

• Fitting Position: Rear Axle
• Laius 1 (mm): 87,6
• Kõrgus (mm): 66,8
• Jämedus/Tugevus (mm): 15,8
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas / TRW
• Kontrolltähistus: ECE R90
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Kulumishoiatus kontakt: ilma integreeritud kulumisandurita
• Kõrgus 1 (mm): 66,9
• Pidurisüsteem: LUCAS/TRW
• Laius 1 (mm): 87
• Jämedus/Tugevus 1 (mm): 16,5
• Manufacturer: JPN

• Filter type: Spin-on Filter
• Height [mm]: 152
• Outer Diameter [mm]: 82
• Entry Thread Size: M14x1.5
• Exit Thread Size: M12x1.5
• SVHC: No SVHC present!
• Manufacturer: FILTRON

• Fitting Position: Rear Axle
• Height [mm]: 67.9
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Width [mm]: 88
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Tootja piirang: TRW
• Laius (mm): 87
• Kõrgus (mm): 67,2
• Jämedus/Tugevus (mm): 16,5
• Kulumishoiatus kontakt: mitte kulumishoiatusnäidiku jaoks ettevalmistatud
• Piirangutega toode/piirangu info 2: koos pidurisadula kruvidega
• Piirangutega toode/piirangu info: koos lisadega
• Manufacturer: AUTO-GH

Piduriseade: mitte süsinik-keraamilistele piduriketastele, ainult koos teras piduriketastega

• Installatsiooni pool: Tagasild
• Laius (mm): 87,6
• Jämedus/Tugevus (mm): 15,8
• Kõrgus (mm): 66,8
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Supplementary Article/Info 2: with bolts/screws
• Brake System: TRW
• Thickness [mm]: 16.5
• Width [mm]: 87
• Height [mm]: 66.8
• Manufacturer: LPR

• Vehicle Identification Number (VIN) from: 89-K-200001
• Vehicle Identification Number (VIN) to: 8A-M-080000
• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Quantity per packing unit: 4
• Width [mm]: 40
• Brake System: VAG
• Inner brake drum diameter [mm]: 200
• Manufacturer: LPR
• Additional information: LPR06830
• Lisainfo: LPR06830

• Vehicle Identification Number (VIN) from: 89-K-200001
• Vehicle Identification Number (VIN) to: 8A-M-080000
• Fitting Position: Rear Axle
• Braking/Drive Dynamics: for vehicles without ABS
• Quantity per packing unit: 4
• Width [mm]: 40
• Brake System: VAG
• Inner brake drum diameter [mm]: 200
• Manufacturer: LPR

• Width 1 [mm]: 24
• Outer Diameter 1 [mm]: 72
• Manufacturer: SNR
• Name: SN GT357.01

• Fitting Position: Rear Axle
• Brake System: Girling-Lucas
• Quantity per packing unit: 4
• Kontrolltähistus: ECE-R90
• Kõrgus 1 (mm): 67
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Võnkumine: ilma võnkevähendajata
• Laius 1 (mm): 87
• Jämedus/Tugevus 1 (mm): 16,5
• Manufacturer: CIFAM

• Fitting Position: Front Axle
• Laius (mm): 119
• Kõrgus (mm): 69,5
• Jämedus/Tugevus (mm): 19
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas / TRW
• Kontrolltähistus: ECE R90
• Manufacturer: ABAKUS LORO

Üldine informatsioon: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Brake System: Girling-Lucas
• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Test Mark: ECE-R90
• Height 1 [mm]: 67
• Wear Warning Contact: excl. wear warning contact
• Vibration: without vibration damper
• Width 1 [mm]: 87
• Thickness 1 [mm]: 16.5
• Manufacturer: METELLI UKL.HAMULCOWY

• Diameter [mm]: 72
• Width [mm]: 20
• Tensioner Pulley Actuation: Manual
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: SKF

• Quantity per packing unit: 4
• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 16,5
• Laius (mm): 87
• Kõrgus (mm): 66,8
• Pidurisüsteem: LUCAS / TRW
• Kaal (kg): 0,85
• Manufacturer: TOMEX BRAKES

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 67
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Engine Code: PM
• Kõrgus (mm): 175
• Välisläbimõõt [mm]: 80
• Konteineri tüüp: Sahtel
• Filtritüüp: Ühendusfilter
• Keermemõõt 1: M14x1.5
• Keermemõõt 2: M12x1.5
• pakendi pikkus [cm]: 8,5
• pakendi laius [cm]: 8,5
• pakendi kõrgus [cm]: 18,5
• Name: CH CFF100217
• Manufacturer: CHAMPION

• Construction Year to: 08.1988
• Fitting Position: Front Axle
• Quantity per packing unit: 4
• Supplementary Article/Info 2: with bolts/screws
• Thickness [mm]: 19.4
• Width [mm]: 119.3
• Height [mm]: 69.6
• Brake System: TRW
• Manufacturer: LPR

• Filtritüüp: Ühendusfilter
• Üldine informatsioon: fuel filter
• Manufacturer: BORSEHUNG

• Vehicle configuration line / variant: TENS
• Belt Pulley Ø [mm]: 72
• Height 1 [mm]: 20.5
• Height 2 [mm]: 27.5
• Weight [kg]: 0.4
• Manufacturer: DAYCO PASKI

• Outer Diameter [mm]: 72
• Width [mm]: 24
• SVHC: No SVHC present!
• Name: PINGUTUSRULL,HAMMASRIHM
• Manufacturer: INA

• Engine Code: NE, JN
• Length [mm]: 87
• Width [mm]: 66.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Weight [kg]: 0.786
• Supplementary Article/Info 2: with bolts/screws
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Width [mm]: 87
• Height [mm]: 67
• Thickness [mm]: 16.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate, with brake caliper screws
• Quality: PREMIUM
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

General Information: Different chamfers on the leading and trailing edges of the brake pads support the silent performance of MEYLE-PD. To ensure this silent performance, slotting and chamfer are individually designed for each brake pad.

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 88
• Height [mm]: 66.8
• Thickness [mm]: 15.8
• WVA Number: 21144
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Name: VA 302340
• Manufacturer: VALEO

• Fitting Position: Rear Axle
• Brake System: TRW
• Width [mm]: 87
• Height [mm]: 52.9
• Thickness [mm]: 17
• WVA Number: 20960
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: with anti-squeak plate
• Test Mark: ECE-R90
• Manufacturer: VALEO
• Name: VA 301463

• Installatsiooni pool: Tagasild
• Laius (mm): 40
• Pidurisüsteem: Ate/Teves
• Piduritrumli läbimõõt seespool [mm]: 200
• Kaal (kg): 1,45
• Manufacturer: TOMEX BRAKES

• Filtritüüp: Ühendusfilter
• Välisläbimõõt [mm]: 87,5
• Kõrgus (mm): 175
• Manufacturer: HENGST FILTER

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• FMSI Code: D228-7309 D228-7498
• Test Mark: E1 90R-01878/541
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 21144
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 87.5
• Width 2 [mm]: 87
• Height 1 [mm]: 66.8
• Height 2 [mm]: 66.8
• Thickness 1 [mm]: 16
• Thickness 2 [mm]: 16
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP451

• Installatsiooni pool: Esisild
• Laius (mm): 119
• Jämedus/Tugevus (mm): 19
• Kõrgus (mm): 69,5
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas / TRW
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Filter type: In-Line Filter
• Diameter [mm]: 80.5
• Height [mm]: 152
• Entry Thread Size: M12x1,5
• Exit Thread Size: M14x1,5
• Packaging height [cm]: 16
• Net Weight [g]: 331
• Packaging length [cm]: 9
• Packaging width [cm]: 9
• Manufacturer: MAHLE KNECHT

• Filter type: In-Line Filter
• Diameter [mm]: 80.5
• Height [mm]: 152
• Entry Thread Size: M12x1,5
• Exit Thread Size: M14x1,5
• Packaging height [cm]: 16
• Net Weight [g]: 331
• Packaging length [cm]: 9
• Packaging width [cm]: 9
• Manufacturer: FILTRY KNECHT / MAHLE
• Name: KN KL28

• Fitting Position: Rear Axle
• Laius (mm): 88
• Kõrgus (mm): 67,9
• Jämedus/Tugevus (mm): 16,6
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: QUARO

• Width [mm]: 18
• Number of Teeth: 121
• Belts: with trapezoidal tooth profile
• Weight [kg]: 1.2
• Units/Pulleys: incl. tensioner pulley
• for OE number: 051 198 119
• Observe service information:
• Name: HAMMASRIHMA KOMPLEKT
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Width [mm]: 119
• Height [mm]: 69.5
• Thickness [mm]: 19.4
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: MAX

• Fitting Position: Front Axle
• Width [mm]: 118.8
• Height [mm]: 69.5
• Thickness [mm]: 19.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Height [mm]: 69.5
• Thickness [mm]: 19.6
• Wear Warning Contact: excl. wear warning contact
• Brake System: Lucas
• Fitting Position: Front Axle
• Width [mm]: 120
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MAX
• Lisainfo: 19-0501
• Additional information: 19-0501

• Construction Year to: 08.1991
• Fitting Position: Rear Axle
• Supplementary Article/Info 2: with anti-squeak plate, with mounting manual
• Article number of recommended accessories: 1987474106, 1987474939, 1987474253
• Observe technical data:
• Material: Low-Metallic
• Test Mark: ECE-R90
• WVA Number: 21144
• Thickness [mm]: 15.1
• Width [mm]: 87
• Height [mm]: 66.8
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: BOS

• Engine Code: NE, JN
• Length [mm]: 87
• Width [mm]: 66.8
• Test Mark: ECE R90 Approved
• Fitting Position: Rear Axle
• Thickness 1 [mm]: 16.5
• Weight [kg]: 0.786
• Supplementary Article/Info 2: with bolts/screws
• Name: SW 30 91 6144
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Filter type: In-Line Filter
• Height [mm]: 152
• Outer Diameter [mm]: 81
• Outer Diameter 1 [mm]: 86
• Entry Thread Size: M14x1.5
• Exit Thread Size: M12x1.5
• SVHC: No SVHC present!
• Name: KšTUSEFILTER
• Manufacturer: MAN

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D227-7143 D684-7571
• Test Mark: E1 90R-01881/648
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20669
• Friction Lining Material: Semi-Metallic
• Width 1 [mm]: 119.3
• Width 2 [mm]: 119
• Height 1 [mm]: 69.5
• Height 2 [mm]: 69.5
• Thickness 1 [mm]: 19.6
• Thickness 2 [mm]: 19.6
• Manufacturer: DELPHI LOCKHEED HAMULCE
• Name: DE LP429

Wear Warning Contact: excl. wear warning contact, not prepared for wear warning indicator

• Fitting Position: Front Axle
• Quantity per packing unit: 4
• FMSI Code: D684-7571
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Supplementary Article/Supplementary Info: with accessories
• WVA Number: 20669
• Friction Lining Material: Semi-Metallic
• Wear Warning Contact: not prepared for wear warning indicator
• Width 1 [mm]: 119.3
• Width 2 [mm]: 119
• Height 1 [mm]: 69.5
• Height 2 [mm]: 69.5
• Thickness 1 [mm]: 15.8
• Thickness 2 [mm]: 15.8
• Manufacturer: DELPHI LOCKHEED HAMULCE

• Fitting Position: Front Axle
• Width [mm]: 119
• Height [mm]: 69.5
• Thickness [mm]: 19.4
• Number of wear indicators [per axle]: 2
• Wear Warning Contact: incl. wear warning contact
• Brake System: TRW
• Supplementary Article/Info 2: with anti-squeak plate
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: MEY

• Installatsiooni pool: Tagasild
• Jämedus/Tugevus (mm): 14
• Kõrgus (mm): 44
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Manufacturer: FAST

Üldine informatsioon: 5-year warranty FAST offers up to 5 years warranty on this product, throughout the entire EU. The guarantee covers manufacturing and material defects. In the event of problems, we will refund you for the part or replace it with a new one. Details and warranty restrictions can be found at fastoriginal.eu

• Fitting Position: Front Axle
• Braking/Drive Dynamics: for vehicles with ABS
• Laius 1 (mm): 118,9
• Kõrgus 1 (mm): 69,5
• Jämedus/Tugevus 1 (mm): 19,6
• Pidurisüsteem: LUCAS/TRW
• Hoiatuskontakti pikkus (mm): 235
• Kulumishoiatus kontakt: koos integreeritud kulumianduriga
• Kaal (kg): 1,55
• Kulumisnäidikute arv [ühe telje kohta]: 2
• Montaažiinfo: Important: Observe Fitting Instructions
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Laius (mm): 88
• Kõrgus (mm): 67,9
• Jämedus/Tugevus (mm): 16,6
• Kulumishoiatus kontakt: ilma kulumihoiatuseta
• Pidurisüsteem: Lucas
• Hõõrdkatte materjal: Keraamika
• Name: Piduriklotsi komplekt,ketaspidur
• Manufacturer: QUARO

• Fitting Position: Front Axle
• Brake System: TRW
• Width [mm]: 119
• Height [mm]: 69.5
• Thickness [mm]: 19.6
• WVA Number: 20901
• Wear Warning Contact: excl. wear warning contact
• Supplementary Article/Info 2: without anti-squeak plate
• Test Mark: ECE-R90
• Weight [kg]: 1.3
• Manufacturer: VALEO
• Name: VA 301003

• Fitting Position: Rear Axle
• Quantity per packing unit: 4
• Manufacturer Restriction: TRW
• Width [mm]: 87
• Height [mm]: 67.2
• Thickness [mm]: 16.5
• Wear Warning Contact: not prepared for wear warning indicator
• Supplementary Article/Info 2: with brake caliper screws
• Supplementary Article/Supplementary Info: with accessories
• Test Mark: E1 90R 01025/181
• Name: PIDURIKLOTSI KOMPLEKT,KETASPIDUR
• Manufacturer: TRW
• Quality class: Q

Braking System: not for carbon-ceramic brake discs, only in conjunction with steel brake discs SVHC: No information available, please contact the manufacturer!

• Construction Year to: 08.1991
• Driven Units: Camshaft
• Article number of the recommended special tool: GAT4740, STT-1
• Name: Hammasrihma komplekt
• Manufacturer: GAT

• Filtritüüp: Ühendusfilter
• Kõrgus (mm): 176
• Välisläbimõõt [mm]: 80
• Keermemõõt 1: M14x1,5
• Keermemõõt 2: M14x1,5
• Manufacturer: PURFLUX