Assembly categories
Filter Brakes Suspension Steering Cooling/Air Conditioning Electrics Accessories Drive Train Exhaust System Body Spark/Glow Ignition Engine Windows/Window Cleaning Lights Fuel Mixture Formation Interior Equipment ServiceProduct
Description
In stock
Price
(incl. VAT)
- Material: Plastic
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Engine Code: JN,
NE - Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Construction Year from: 01.1990
- Quantity Unit: Kit
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Quantity per packing unit: 100
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Material: Plastic
- for OE number: 032121142
- Manufacturer: DELLO AUTOMEGA
-
Vehicle Identification Number (VIN) to: 8A-
N- 200 000 - Engine Code: PM
-
Vehicle Identification Number (VIN) from: 8A-
N- 000 001, 89- H- 300 001 - Diameter [mm]: 20
- Manufacturer: DELLO AUTOMEGA
-
Engine Code: NE,
JN - Thickness [mm]: 3.5
- Inner Diameter [mm]: 19.5
-
Material: NBR
(nitrile butadiene rubber) - Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Weight [kg]: 0.015
-
Name: KINNITUSVEDRU,
JAHUTUSVEDELIKUFLANTS- SULGURKORK - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Name: STOPPER
- Manufacturer: MAX
-
Engine Code: NE,
JN -
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: MAX
- Material: Plastic
-
Supplementary Article/Supplementary Info: with spring,
with gasket/ seal - Full Set:
- for OE number: 357198140S
- Manufacturer: DELLO AUTOMEGA
- Supplementary Article/Supplementary Info: with accessories
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: MAX
- Fitting Position: Cylinder Head
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Housing material: Plastic
- Colour: black
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 026121144E
- Manufacturer: DELLO AUTOMEGA
-
Engine Code: NE,
JN - Weight [kg]: 0.02
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Quantity: 1
-
Kaal (kg): 0,
1 - Materjal: Plastik
- vajaminev tükihulk: 1
- Üldine informatsioon: pipe union
- Manufacturer: VIKA
- for manufacturer number: 7920017
- Manufacturer: KAMOKA
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Quantity per packing unit: 4
- Installatsiooni pool: küljepoolne sisseehitus
-
Kaal (kg): 0,
041 - Materjal: Plastik
- Piirangutega toode/piirangu info: koos tihendiga
- Kaal (g): 41
- Manufacturer: METALCAUCHO
- for manufacturer number: 7920048
- Manufacturer: KAMOKA
- Thickness [mm]: 3.15
- Inner Diameter [mm]: 36
- Material: Rubber
- Weight [kg]: 0.003
-
Name: TIHEND,
JAHUTUSVEDEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Täiskomplekt:
- Manufacturer: METZGER
- Construction Year from: 01.1990
- Number of circuits: 5
- Manufacturer: JP GROUP
- Lisainfo: PAKENDIS 10 tk
- Additional information: PAKENDIS 10 tk
-
Engine Code: NE,
JN - Weight [kg]: 0.038
- Supplementary Article/Info 2: with seal ring
- Supplementary Article/Supplementary Info: with retaining spring
-
Name: SULGURKORK,
JAHUTUSVEDELIKUFLANTS - Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Engine Code: PM
- Material: Plastic
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MAX
- Engine Code: PM
- Housing material: Plastic
- Supplementary Article/Info 2: with seal ring
- for OE number: 037121132B
- Manufacturer: DELLO AUTOMEGA
-
Fitting Position: Cylinder Head,
transmission sided - Manufacturer: NRF
- for OE number: 037121145
- Material: Plastic
-
Supplementary Article/Supplementary Info: with gasket/
seal - Weight [g]: 45
- Supplementary Article/Info 2: without thermostat
- Name: IM 90186
- Manufacturer: ORIGINAL IMPERIUM
- for OE number: 055121121F
- Manufacturer: NRF
-
Fitting Position: Cylinder Head,
Rear - Weight [kg]: 0.038
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Vehicle Equipment: for vehicles with automatic transmission
-
Fitting Position: Cylinder Head,
Flywheel side - Manufacturer: VERNET
- Number of flange connections: 1
- Fitting Position: Cylinder Head
- Manufacturer: NRF
- Installatsiooni pool: stirnseitig
-
Kaal (kg): 0,
11 - Materjal: Plastik
- Piirangutega toode/piirangu info: koos tihendiga
- Kaal (g): 110
- Manufacturer: METALCAUCHO
- Engine Code: PM
- Material: Plastic
- Fitting Position: Cylinder Head
- Weight [kg]: 0.161
- for OE number: 037 121 132 B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Vehicle Equipment: for vehicles with manual transmission
-
Fitting Position: Cylinder Head,
Flywheel side - Manufacturer: VERNET
-
Fitting Position: Cylinder Head,
Front - Cooling Hose: from engine to engine cooler
- for OE number: 037121132B
- Manufacturer: NRF
- Material: Plastic
- Fitting Position: Cylinder Head
- Weight [kg]: 0.1
-
Supplementary Article/Supplementary Info: with gasket/
seal - for OE number: 026 121 144 E
- Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: FEB
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 01.1990
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: JAHUTUSVEDELIKU FLANTS
- Manufacturer: MEY
- Fitting Position: Thermostat
- Manufacturer: VERNET
- Engine Code: PM
- Material: Plastic
- Fitting Position: Cylinder Head
- Weight [kg]: 0.161
- for OE number: 037 121 132 B
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: SW 30 12 0026
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Material: Plastic
- Fitting Position: Cylinder Head
- Weight [kg]: 0.1
- for OE number: 026 121 144 E
-
Supplementary Article/Supplementary Info: with gasket/
seal - Name: SW 99 91 2410
- Manufacturer: SWAG
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Construction Year from: 01.1990
-
Fitting Position: Cylinder Head,
Lateral Mounting - Cooling Hose: from engine to engine cooler
- Manufacturer: VERNET
-
Küte/Jahutus: koos termolüliti-
ühendus - Edasi-/tagasikäik: für Vorlauf
- Jahutustorustik: mootorist kütteradiaatorisse
- Manufacturer: METALCAUCHO
-
Engine Code: NE,
JN - Materjal: Plastik
- Spetsifikatsioon: Con cierre de pipas
- Manufacturer: 3RG
-
Fitting Position: Cylinder Head,
Front - Height [mm]: 94.5
- Length [mm]: 71.1
- Width [mm]: 103.7
- Weight [kg]: 0.098
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Materjal: Metall
- Manufacturer: 3RG
- Engine Code: PM
- Diameter 1 [mm]: 32
- Diameter 2 [mm]: 32
- Diameter 3 [mm]: 25
- for OE number: 037121132A
- Manufacturer: MEAT&DORIA
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks