• Number of pins: 4
• Colour Coding: green
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 4 pins
• Additional information: Sender for water temperature gauge 4 pins

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Material: Rubber
• for OE number: 7198663
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Weight [kg]: 0.001
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 1100619
• Manufacturer: KAMOKA

• Fabrication Number: ECT-AU-008
• Number of pins: 4
• Manufacturer: NTY

• Quantity: 1
• Weight [kg]: 0.02
• Number of connectors: 4
• Outer Diameter [mm]: 20
• Plug Type ID: 4
• Colour: green
• Required quantity: 1
• General Information: temperature sensor; green; 4 pins
• Manufacturer: VIKA

• Operating voltage [V]: 12
• Switch point from [°C]: 84, 91
• Switch point to [°C]: 95, 102
• Spanner Size: 20
• Diameter [mm]: 20
• Supplementary Article/Info 2: without seal ring
• Colour: grey
• Number of pins: 4
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 95-84/102-91 C
• Additional information: Thermo switch for fan 95-84/102-91 C

• Fabrication Number: ECT-AU-004
• Number of pins: 4
• Colour Coding: green
• Connector Shape: oval
• Manufacturer: NTY

• Engine Code: AVF
• Number of connectors: 4
• Manufacturer: 3RG

• Vehicle Identification Number (VIN) from: 4B-Y-000001
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 059919501
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 4
• Plug Type: Female
• Sensor Type: NTC Sensor
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Fitted Diameter [mm]: 20
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MAX

• Housing Colour: black
• Number of pins: 4
• Spanner Size: 0
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: DLP

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Vehicle Identification Number (VIN) to: 4B-5-050 000
• Number of pins: 4
• Colour: green
• Manufacturer: DELLO AUTOMEGA

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• for OE number: 059919501A
• Supplementary Article/Info 2: with mounting parts
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: NRF

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without seal ring
• Colour: green
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: MEY

• Number of pins: 4
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Number of switch stages: 2
• Connector Shape: D Shape
• Housing Colour: blue
• Fitted Diameter [mm]: 20
• Article number of recommended accessories: 104 529, 107 319
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Quantity: 1
• Switch Point [°C]: 90, 102
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Housing Colour: blue
• General Information: thermal switch
• Manufacturer: VIKA

• Number of connectors: 4
• Connector Shape: round
• Thread Size: 20 mm
• Number of pins: 4
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: VER

• Vehicle Identification Number (VIN) from: ******4B*Y*000001
• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB
• Additional information: FE32510
• Lisainfo: FE32510

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: AVF
• Housing Colour: green
• Corresponds to the original part in colour: black
• Manufacturer: FACET

• Engine Code: AVF
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: EPS

• for OE number: 078 919 501 C
• Manufacturer: TRUCKTEC

• Required quantity: 1
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Colour: green
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Vehicle Identification Number (VIN) from: ******4B*Y*000001
• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 93 2510
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: blue
• Shut-off Point [°C]: 95, 97
• Switch Point [°C]: 90, 102
• for OE number: 8D0959481B
• Manufacturer: MEAT&DORIA

• Voltage [V]: 12
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV345

• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 90, 97
• Thread Size: 20 mm
• Sensor Type: Open-style sensor
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: VER

• Number of pins: 4
• Colour: green
• Supplementary Article/Supplementary Info: with gasket/seal
• Version: IAM
• Article number of recommended accessories: 0905458
• Power [W]: 0.06
• Manufacturer: METZGER

• Number of pins: 4
• Switch point from [°C]: 102, 95
• Switch point to [°C]: 90, 97
• Manufacturer: ERA

• Number of pins: 2
• Colour Coding: grey
• Supplementary Article/Info 2: with seal ring
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: black
• Required quantity: 1
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Name: ANDUR,JAHUTUSVEDELIKU TEMP.
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of connectors: 4
• Connector Shape: round
• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: green, black
• Assy./disassy. by qualified personnel required!:
• Name: Andur,Jahutusvedeliku temp.
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Operating voltage [V]: 12
• Switch point from [°C]: 95, 102
• Switch point to [°C]: 82, 89
• Spanner Size: 20
• Diameter [mm]: 20
• Supplementary Article/Info 2: without seal ring
• Colour: blue
• Number of pins: 4
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: MEY

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Quantity: 1
• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: green
• Required quantity: 1
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Number of connectors: 4
• Colour: blue
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 29
• Height [mm]: 45
• Weight [kg]: 0.073
• Thread Size: M22x1,5
• Switch Point [°C]: 102, 85
• Colour: black
• Switch: with double thermal switch
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch Point [°C]: 102, 90
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Housing Colour: blue
• Switch point from [°C]: 102
• Switch point to [°C]: 90
• Weight [kg]: 0.031
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Colour: blue
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 84, 91
• Temperature range to [°C]: 95, 102
• Power [W]: 0.06
• Manufacturer: METZGER

• Housing Colour: blue
• Switch point from [°C]: 95
• Switch point to [°C]: 90
• Manufacturer: FAE

• Mounting Type: Plugged
• Supplementary Article/Supplementary Info: with gasket/seal
• Switch point from [°C]: 90
• Switch point to [°C]: 102
• Voltage [V]: 12
• Number of pins: 4
• Switch: for double thermal switch
• Combi Switch Function: Dual Output, Normally Open Contact
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6ZT181611081
• Manufacturer: HELLA

• Diameter [mm]: 25
• Length [mm]: 50
• Weight [kg]: 0.02, 0.2
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501
• Spring Design: Retaining Spring
• Number of pins: 4
• Connector Shape: angular
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AVF
• Name: TEMPERATUURILšLITUS,RADIAATORIVENT.
• Manufacturer: EPS

• Number of connectors: 4
• Fitting Depth [mm]: 20
• Manufacturer: BERU BY DRIV

• Manufacturer Restriction: VAG
• Number of pins: 4
• Cable Length [mm]: 200
• Cable Cross Section [mm²]: 0.75
• Contact surface: Gold-plated
• Socket Width [mm]: 1.6
• Supplementary Article/Supplementary Info: with socket housing, with gasket/seal
• Supplementary Article/Info 2: with pipe
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt, rattap””rete andur
• Manufacturer: HBE