• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Quantity: 1
• for PR number: 8Q3
• paired article number: 294731
• Net weight [kg]: 0.14

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• for PR number: 8Q3
• Fitting Position: Rear Axle Left
• Sensor Type: Passive sensor
• Length [mm]: 1,000
• Socket colour: black
• Manufacturer: JP GROUP A/S

• Vehicle Identification Number (VIN) to: 4B-X-120 000
• Supplementary Article/Info 2: with lid
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Manufacturer: JP GROUP
• Lisainfo: Brake fluid tank
• Additional information: Brake fluid tank

• for PR number: 8Q0, 8Q1, 8Q3
• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Manufacturer: JP GROUP
• Lisainfo: ABS sensor, rear, left/right
• Additional information: ABS sensor, rear, left/right

• Fitting Position: Rear Axle Left, Rear Axle Right
• Vehicle Identification Number (VIN) from: 4B-2-079501
• Vehicle Equipment: for vehicles with headlight levelling (mechanical)
• for PR number: 8Q0, 8Q1
• Sensor Type: Passive sensor
• Length [mm]: 1,250
• Socket colour: black
• Manufacturer: JP GROUP

• Fitting Position: Front Axle
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Thickness [mm]: 11
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Width [mm]: 11
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Fabrication Number: NZA-AU-001
• Manufacturer: NTY
• Name: NTY NZA-AU-001
• Lisainfo: 45 T 81 MM / 77 MM / 11 MM
• Additional information: 45 T 81 MM / 77 MM / 11 MM

• Fitting Position: Front Axle both sides
• Width [mm]: 11
• Number of Teeth, ABS ring: 45
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 80.7
• Weight [kg]: 0.028
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle
• Width [mm]: 11
• Number of Teeth: 45
• Outer Diameter [mm]: 81
• Inner Diameter [mm]: 77
• Name: ANDUR,ABS
• Manufacturer: MAX

• Fitting Position: Front Axle both sides
• Number of Teeth: 45
• Inner Diameter [mm]: 77
• Outer Diameter [mm]: 81
• Width [mm]: 11
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Front Axle
• Inner Diameter [mm]: 76.8
• Width [mm]: 11
• Outer Diameter [mm]: 80.7
• Number of Teeth, ABS ring: 45
• Name: ANDUR,ABS
• Manufacturer: TRI
• Lisainfo: VAG
• Additional information: VAG

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• for PR number: 8Q3
• Fitting Position: Rear Axle Left, Rear Axle Right
• Length [mm]: 950
• Number of pins: 2
• Sensor Type: Passive sensor
• Supplementary Article/Info 2: with cable
• Fabrication Number: HCA-AU-010
• Manufacturer: NTY

• Fitting Position: Rear Axle Right
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 930
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Front Axle
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 1,035
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 4B0 927 807
• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA

• Number of pins: 3
• Fitting Position: Rear Axle Left
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Sensor Type: Passive sensor
• Number of pins: 2
• Cable Length [mm]: 1,035
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle Left, Rear Axle Right
• Fabrication Number: HCA-AU-012
• Manufacturer: NTY

• Fitting Position: Rear Axle
• Length [mm]: 930
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Rear Axle Left, Rear Axle Right
• Block Separation:
• for PR number: 8Q3, 8Q1
• paired article number: 20-0071
• Number of pins: 2
• Length [mm]: 1,000
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

Vehicle Equipment: for vehicles without headlight levelling, for vehicles with headlight levelling (automatic)

• Fitting Position: Rear Axle
• Length [mm]: 1,170
• Number of pins: 2
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Rear Axle
• Length [mm]: 930
• Number of pins: 2
• Plug Type: Male
• Connector Shape: rectangular
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.15
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV025

• Vehicle Identification Number (VIN) from: 4B-X-120 001
• Supplementary Article/Info 2: with cap, with sensor
• Observe system fill quantity:
• Material: Plastic
• Manufacturer: DELLO AUTOMEGA

• Fitting Position: Rear Axle Right, Rear Axle Left
• for PR number: 8Q3, 8Q0, 8Q1
• Block Separation:
• Supplementary Article/Info 2: with cable
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Length [mm]: 990
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: red/black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: ENERGY

• Fitting Position: Rear Axle, Rear Axle Right, Rear Axle Left
• Manufacturer: AUTO-GH

• Fitting Position: Front Axle, Rear Axle, Rear Axle Right
• Block Separation:
• for PR number: 8Q3
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,000
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

Vehicle Equipment: for vehicles without headlight levelling, for vehicles with headlight levelling (automatic)

• Vehicle Identification Number (VIN) to: 4B-X-120000, 4B-1-200000
• Block Separation:
• Supplementary Article/Info 2: with lid, with sensor
• Material: Plastic
• Observe system fill quantity:
• Manufacturer: TOPRAN

Left-/right-hand drive vehicles: for left-hand drive vehicles, for right-hand drive vehicles General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) from: 4B-3-000001
• Sensor Type: Passive sensor
• Required quantity: 2
• Cable Length [mm]: 985
• Wear Warning Contact: prepared for wear warning indicator
• Number of pins: 3, 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MAX

• Fitting Position: Rear Axle Left
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Cable Length [mm]: 945
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Fitting Position: Rear Axle, Rear Axle Right
• Required quantity: 2, 1
• Vehicle Identification Number (VIN) to: 4B-2-079500
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,220
• Number of pins: 2
• Name: Andur, rattap””rete arv
• Manufacturer: MAX

• for OE number: 4B0927803E
• Sensor Type: Passive sensor
• Fitting Position: Front Axle
• Manufacturer: KAMOKA

• Vehicle Identification Number (VIN) to: 4B-X-060000
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,142
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Rear Axle Left, Rear Axle Right
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• paired article number: 23812
• Number of connectors: 2
• Weight [kg]: 0.11
• Manufacturer: FEBI BILSTEIN

Vehicle Equipment: for vehicles without headlight levelling, for vehicles with headlight levelling (automatic) General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Length [mm]: 990
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: red/black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 06SKV015

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Fitting Position: Rear Axle Left, Rear Axle Right
• Number of pins: 2
• Connector Shape: rectangular
• Overall Length [mm]: 1,000
• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 44
• for OE number: 4B0927807
• Manufacturer: MEAT&DORIA

• Fabrication Number: CZW-VW-027
• Supplementary Article/Info 2: with lid, with sensor
• Number of connectors: 2
• Material: Plastic
• Observe system fill quantity:
• Manufacturer: NTY

• Vehicle Identification Number (VIN) to: 4B-2-031 500, 4B-2-200 000
• Rim Size [inch]: 17.0, 18.0
• Block Separation:
• Vehicle Identification Number (VIN) from: 4B-2-031 501
• Fitting Position: Front Axle
• Height [mm]: 1,050, 28
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Length [mm]: 1,060
• Number of connectors: 2
• Multiple: 3
• Supplementary Article/Info 2: with cable
• Required quantity: 2
• Resistor [Ohm]: 1,630
• Cable Length [mm]: 975
• Mounting Type: Bolted
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 2
• Weight [kg]: 0.126
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Weight [kg]: 0.11
• Number of connectors: 2
• Required quantity: 2
• Fitting Position: Rear Axle
• General Information: ABS speed sensor; rear right
• Manufacturer: VIKA

• Fitting Position: Rear Axle
• Length [mm]: 1,170
• Number of pins: 2
• Guarantee: 3 years guarantee
• Voltage [V]: 12
• Weight [kg]: 0.14
• Colour: black
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Name: CE 06SKV022
• Manufacturer: ESEN SKV

• Vehicle Identification Number (VIN) to: 4B-2-031500, 4B-2-200000
• Rim Size [inch]: 17, 18
• Block Separation:
• Vehicle Identification Number (VIN) from: 4B-2-031501
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,060
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Identification Number (VIN) to: 4B-2-200 000
• Sensor Type: Passive sensor
• Cable Length [mm]: 975
• Wear Warning Contact: prepared for wear warning indicator
• Number of pins: 2
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Supplementary Article/Info 2: with lid, without sensor
• Name: Paisupaak,pidurivedelik
• Manufacturer: MAX

• Vehicle Identification Number (VIN) from: 4B-3-000001
• Fitting Position: Front Axle Left, Front Axle Right
• Supplementary Article/Info 2: with cable
• Length [mm]: 1,067
• Braking/Drive Dynamics: for vehicles with ABS
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle Left, Front Axle Right
• Cable Length [mm]: 1,010
• Sensor Type: Inductive Sensor
• Number of pins: 6
• Fitting Depth [mm]: 28
• Resistor [Ohm]: 1,630
• Manufacturer: ERA

• Vehicle Identification Number (VIN) from: 4B-3-000 001
• Sensor Type: Passive sensor
• Cable Length [mm]: 985
• Wear Warning Contact: prepared for wear warning indicator
• Number of pins: 2, 3
• Fitting Position: Front Axle
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Vehicle Identification Number (VIN) from: 4B-X-120001
• Vehicle Identification Number (VIN) to: 4B-1-200000
• Material: Plastic
• Supplementary Article/Info 2: with lid, with sensor
• Observe system fill quantity:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Required quantity: 1
• Fitting Position: Rear Axle Right
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• for OE number: 8E0 611 301
• Width [mm]: 116.6
• Height [mm]: 61
• Length [mm]: 165
• Weight [g]: 109
• Guarantee: 3 years guarantee
• Manufacturer: AT AUTOTEILE GERMANY

General Information: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

• Fitting Position: Rear Axle, Rear Axle Right
• Required quantity: 2, 1
• Vehicle Identification Number (VIN) to: 4B-2-079 500
• Block Separation:
• Braking/Drive Dynamics: for vehicles with ESP
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Sensor Type: Passive sensor
• Cable Length [mm]: 1,220
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: MEY

• Fitting Position: Rear Axle, Rear Axle Right
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Overall Length [mm]: 1,000
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 900
• paired article number: 30011
• Weight [kg]: 0.11
• Manufacturer: A.B.S.

• for OE number: 4B0 927 807
• Fitting Position: Rear Axle both sides
• Name: Andur, rattap””rete arv
• Manufacturer: TRU

• Supplementary Article/Info 2: with cap
• Manufacturer: ABAKUS

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus and the manufacturer of this spare part. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• for OE number: 4B0927807Q
• Fitting Position: Rear Axle Right
• Manufacturer: KAMOKA

• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 8Q0, 8Q1
• Cable Length [mm]: 930
• Sensor Type: Inductive Sensor
• Number of pins: 2
• Assy./disassy. by qualified personnel required!:
• Name: Andur, rattap””rete arv
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Required quantity: 2
• Fitting Position: Front Axle
• Supplementary Article/Info 2: with cable
• Name: CZUJNIK ABS VW P. A4 02- LE/PR 1050MM
• Manufacturer: BRM

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• for PR number: 8Q3
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 955
• Manufacturer: DELPHI LOCKHEED HAMULCE

• General Information: brake oil tank
• Manufacturer: VIKA

• Guarantee: 3 years guarantee
• Weight [kg]: 0.34
• Always compare old and new part (in particular OE No.):
• Name: CE 96SKV136
• Manufacturer: ESEN SKV

• Fitting Position: Rear Axle, Rear Axle Right
• for PR number: 8Q0, 8Q1, 8Q3
• Block Separation:
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Sensor Type: Passive sensor
• Number of occupied pins: 2
• Cable Length [mm]: 950
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: DLP

• Fitting Position: Rear Axle
• Required quantity: 2
• for PR number: 8Q0, 8Q1
• Cable Length [mm]: 950
• Fitting Depth [mm]: 41
• Number of pins: 2
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Vehicle Identification Number (VIN) to: 4B-X-120 000
• Supplementary Article/Info 2: with sensor, with lid
• Weight [kg]: 0.241
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Required quantity: 1
• for PR number: 8Q3
• Cable Length [mm]: 925
• Sensor Type: Inductive Sensor
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Number of pins: 2, 3
• Fitting Position: Rear Axle Left
• Assy./disassy. by qualified personnel required!:
• Name: Andur, rattap””rete arv
• Manufacturer: HEL

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Fitting Position: Front Axle
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Fitting Position: Front Axle
• Overall Length [mm]: 1,050
• Length [mm]: 28
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 980
• Wear Warning Contact: incl. wear warning contact
• Mounting Type: Bolted
• paired article number: 30023
• Weight [kg]: 0.14
• Manufacturer: A.B.S.

• Fitting Position: Front Axle
• Required quantity: 2
• Cable Length [mm]: 975
• Fitting Depth [mm]: 28.1
• Number of pins: 4
• Resistance [Ohm]: 1,600
• Name: ANDUR, RATTAP™™RETE ARV
• Manufacturer: TRI

• Fitting Position: Front Axle Left, Front Axle Right
• Length [mm]: 1,035
• Braking/Drive Dynamics: for vehicles with ABS
• Rated Voltage [V]: 12
• Supplementary Article/Info 2: with cable
• Housing Colour: black
• Height [mm]: 28
• Required quantity: 2
• Resistor [Ohm]: 1,750
• Cable Length [mm]: 1,000
• Sensor Type: Inductive Sensor, Passive sensor
• Number of pins: 4
• Number of connectors: 2
• Weight [kg]: 0.126
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Required quantity: 1
• Fitting Position: Rear Axle Left
• Supplementary Article/Info 2: with cable
• Manufacturer: BREMI

• Fitting Position: Rear Axle Left
• Guarantee: 5 years guarantee
• Manufacturer: HUCO

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• for PR number: 8Q3
• Overall Length [mm]: 995
• Sensor Type: Passive sensor
• Socket colour: black
• Cable Length [mm]: 915
• paired article number: 30011
• Weight [kg]: 0.14
• Manufacturer: A.B.S.

• Sensor Type: Inductive Sensor
• Fitting Depth [mm]: 28
• Braking/Drive Dynamics: for vehicles with ABS
• Fitting Position: Front Axle Right, Front Axle Left
• for OE number: 4B0927803E
• Manufacturer: MEAT&DORIA

• Vehicle Identification Number (VIN) to: 4B-X-120 000
• Supplementary Article/Info 2: with lid, with sensor
• Left-/right-hand drive vehicles: for left-hand drive vehicles
• Manufacturer: METZGER

• Fitting Position: Rear Axle Right, Rear Axle
• Supplementary Article/Info 2: with control unit for aut. LDR, with cable
• Block Separation:
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH UK£ADY HAMULCOWE

Vehicle Equipment: for vehicles with headlight levelling (automatic), for vehicles with headlight levelling (mechanical)

• Fitting Position: Rear Axle Left
• Vehicle Equipment: for vehicles with headlight levelling (automatic)
• Supplementary Article/Info 2: with control unit for aut. LDR, with cable
• Temperature range from [°C]: -40
• Temperature range to [°C]: 150
• Manufacturer: BOSCH HAMULCE