• Construction Year from: 07.1999
• Number of pins: 4
• Colour Coding: green
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 4 pins
• Additional information: Sender for water temperature gauge 4 pins

• Operating voltage [V]: 12
• Sensor Type: NTC Sensor
• Switch Point [°C]: 150
• Diameter [mm]: 20
• Number of pins: 4
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 4 pins
• Additional information: Temperature sensor for cooling system, 4 pins

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Material: Rubber
• for OE number: 7198663
• Manufacturer: DELLO AUTOMEGA

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Inner Diameter [mm]: 19.5
• Thickness [mm]: 3.5
• Weight [kg]: 0.001
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• for OE number: 049919563B
• Thread Size: M10x1 mm
• Spanner Size: 13 mm
• Number of pins: 1
• Manufacturer: KAMOKA
• Additional information: 4080049 KAMOKA
• Lisainfo: 4080049 KAMOKA

• Construction Year to: 12.1998
• Engine Code: AGA, ALF
• Manufacturer: AIC
• Lisainfo: 51913 AIC
• Additional information: 51913 AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 1100619
• Manufacturer: KAMOKA

• for OE number: 59919501
• Temperature range to [°C]: 150
• Manufacturer: KAMOKA

• Weight [kg]: 0.2
• Number of connectors: 4
• Outer Diameter [mm]: 20
• Plug Type ID: 4
• Colour: blue
• Supplementary Article/Info 2: with seal ring
• Required quantity: 1
• General Information: temperature sensor; blue; 4 pins
• Manufacturer: VIKA

• Engine Code: AGA; ALF, APS; ARJ
• Block Separation:
• Vehicle Identification Number (VIN) to: 4B-X-200 000
• Thread Size: M10 x 1
• Spanner Size: 14
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 1
• Colour Coding: blue
• Weight [kg]: 0.019
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fabrication Number: ECT-AU-008
• Number of pins: 4
• Manufacturer: NTY

• Weight [kg]: 0.02
• Number of connectors: 4
• Outer Diameter [mm]: 20
• Plug Type ID: 4
• Colour: green
• Required quantity: 1
• General Information: temperature sensor; green; 4 pins
• Manufacturer: VIKA

• Operating voltage [V]: 12
• Switch point from [°C]: 84, 91
• Switch point to [°C]: 95, 102
• Spanner Size: 20
• Diameter [mm]: 20
• Supplementary Article/Info 2: without seal ring
• Colour: grey
• Number of pins: 4
• Manufacturer: JP GROUP
• Lisainfo: Thermo switch for fan 95-84/102-91 C
• Additional information: Thermo switch for fan 95-84/102-91 C

• Fabrication Number: ECT-AU-004
• Number of pins: 4
• Colour Coding: green
• Connector Shape: oval
• Manufacturer: NTY

• Engine Code: AGA
• Construction Year from: 07.1999
• Vehicle Identification Number (VIN) from: 4BY000001
• Number of connectors: 4
• Manufacturer: 3RG

• Construction Year to: 06.1999
• Colour Coding: green
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 4
• for OE number: 059 919 501
• Supplementary Article/Info 2: with clip, with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 4B_X_200000
• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 4
• Socket colour: black
• for OE number: 059919501
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Construction Year from: 07.1999
• Vehicle Identification Number (VIN) from: 4BY000001
• Connector Shape: D Shape
• Material: Plastic
• Number of pins: 4
• Plug Type: Female
• Sensor Type: NTC Sensor
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Housing Colour: black
• Number of pins: 4
• Spanner Size: 0
• Manufacturer: DELPHI
• Name: DE TS10236-12B1

• Vehicle Identification Number (VIN) to: 4B-5-050 000
• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Number of pins: 4
• Colour: green
• Manufacturer: DELLO AUTOMEGA

• Connecting thread: M10 x 1
• Manufacturer: ERA

• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 4BX200000
• Thread Size: 20 mm
• Manufacturer: VERNET
• Additional information: WS2605 VERNET
• Lisainfo: WS2605 VERNET

• Construction Year from: 07.1999
• Vehicle Identification Number (VIN) from: 4B_Y_000001
• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: D Shape
• Number of pins: 4
• for OE number: 059919501A
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Number of pins: 4
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with clamp holder
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 059 919 501
• Manufacturer: TRUCKTEC

• Engine Code: AGA
• Housing Colour: blue
• Temperature range to [°C]: 180
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: blue
• Name: EP 1.830.093
• Manufacturer: EPS

• Number of pins: 4
• Switch-on point [°C]: 95, 102
• Shut-off Point [°C]: 84, 91
• Number of switch stages: 2
• Connector Shape: D Shape
• Housing Colour: blue
• Fitted Diameter [mm]: 20
• Article number of recommended accessories: 104 529, 107 319
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Switch Point [°C]: 90, 102
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Housing Colour: blue
• General Information: thermal switch
• Manufacturer: VIKA

• Construction Year from: 07.1999
• Vehicle Identification Number (VIN) from: 4BY000001
• Thread Size: 20 mm
• Number of pins: 4
• Manufacturer: VERNET

• Engine Code: ALF, AGA, ARJ, APS
• Vehicle Identification Number (VIN) to: ******4B*X*200000
• Temperature range to [°C]: 150
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Weight [kg]: 0.2
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: ******4B*Y*000001
• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Manufacturer: FEBI
• Additional information: FE32510
• Lisainfo: FE32510

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 4BX200000
• Housing Colour: dark green
• Number of pins: 4
• Spanner Size: 0
• Manufacturer: DELPHI

• Engine Code: AGA
• Construction Year from: 07.1999
• Vehicle Identification Number (VIN) from: 4B_Y_000001
• Housing Colour: green
• Corresponds to the original part in colour: black
• Manufacturer: FACET

• Engine Code: AGA
• Construction Year from: 07.1999
• Vehicle Identification Number (VIN) from: 4B_Y_000001
• Housing Colour: green
• Corresponds to the original part in colour: black
• Name: EP 1.830.258
• Manufacturer: EPS

• Construction Year to: 12.2001
• Vehicle Identification Number (VIN) to: F 4B-X-200 000
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Colour: black
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• for OE number: 078 919 501 C
• Manufacturer: TRUCKTEC

• Engine Code: ALF, AGA, ARJ, APS
• Vehicle Identification Number (VIN) to: ******4B*X*200000
• Temperature range to [°C]: 150
• Outer Diameter [mm]: 20
• Number of connectors: 4
• Colour: green
• Weight [kg]: 0.2
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 93 1539
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: ******4B*Y*000001
• Number of connectors: 4
• Weight [kg]: 0.038
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 93 2510
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Voltage [V]: 12
• Number of pins: 4
• Guarantee: 3 years guarantee
• Weight [kg]: 0.02
• Operating Mode: Electric
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 17SKV345

• Number of pins: 4
• Connector Shape: D Shape
• Socket colour: blue
• Shut-off Point [°C]: 95, 97
• Switch Point [°C]: 90, 102
• for OE number: 8D0959481B
• Manufacturer: MEAT&DORIA

• Engine Code: AGA, ALF, ARJ, APS
• Block Separation:
• Vehicle Identification Number (VIN) to: ******4B*X*200000
• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 4BX200000
• Connector Shape: rectangular
• Material: Brass
• Number of pins: 4
• Plug Type: Male
• Sensor Type: NTC Sensor
• Spanner Size: 20 mm
• Name: NI 207090
• Manufacturer: NISSENS

Technical Information: FIRST FIT - a time-saving installation! Find all additional parts such as O-rings, clip, washer in the box.

• Operating temperature from [°C]: 95, 102
• Operating temperature to [°C]: 90, 97
• Thread Size: 20 mm
• Sensor Type: Open-style sensor
• Manufacturer: VERNET

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Number of pins: 4
• Colour: green
• Supplementary Article/Supplementary Info: with gasket/seal
• Version: IAM
• Article number of recommended accessories: 0905458
• Power [W]: 0.06
• Manufacturer: METZGER

• Engine Code: AGA, ALF, ARJ, APS
• Block Separation:
• Vehicle Identification Number (VIN) to: ******4B*X*200000
• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 93 3825
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of pins: 4
• Switch point from [°C]: 102, 95
• Switch point to [°C]: 90, 97
• Manufacturer: ERA

• Number of pins: 4
• Supplementary Article/Supplementary Info: with gasket/seal
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Sensor Type: NTC Sensor
• Supplementary Article/Info 2: without seal ring
• Colour: green
• Number of pins: 4
• Manufacturer: MEYLE

• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: black
• Required quantity: 1
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Engine Code: AGA
• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 4B_X_200000
• Colour: blue
• Corresponds to the original part in colour: blue
• Manufacturer: FACET

• Engine Code: AGA
• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 4B_X_200000
• Colour: blue
• Corresponds to the original part in colour: blue
• Name: EP 1.830.260
• Manufacturer: EPS

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with gasket/seal, with retaining spring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 07.1999
• Vehicle Identification Number (VIN) from: 4BY000001
• Weight [kg]: 0.017, 0.027
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501 A
• Colour Coding: green
• Spring Design: Retaining Spring
• Number of pins: 4
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Vehicle Identification Number (VIN) to: 4B-X-200 000
• Number of pins: 4
• Housing Colour: blue
• Corresponds to the original part in colour: green, blue
• Supplementary Article/Supplementary Info: with gasket/seal
• Power [W]: 0.06
• Manufacturer: METZGER

• Construction Year from: 07.1999
• Construction Year to: 05.2001
• Vehicle Identification Number (VIN) from: 4B_Y_000001
• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: green, black
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107141

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 4B_X_200000
• Mounting Type: Plugged
• Voltage [V]: 12
• Supplementary Article/Supplementary Info: with gasket/seal
• Colour: green
• Sensor Type: NTC Sensor
• Number of pins: 4
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: green, blue
• Assy./disassy. by qualified personnel required!:
• Manufacturer: HELLA
• Name: HE 6PT009107541

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with retaining spring, with gasket/seal
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Outer Diameter [mm]: 20
• Weight [kg]: 0.02
• Number of connectors: 4
• Colour: green
• Required quantity: 1
• General Information: coolant temperature sensor
• Manufacturer: BORSEHUNG

• Number of connectors: 4
• Colour: blue
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Length [mm]: 29
• Height [mm]: 45
• Weight [kg]: 0.073
• Thread Size: M22x1,5
• Switch Point [°C]: 102, 85
• Colour: black
• Switch: with double thermal switch
• Supplementary Article/Supplementary Info: with gasket/seal
• Number of pins: 3
• Switch point from [°C]: 102
• Switch point to [°C]: 85
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch Point [°C]: 102, 90
• Number of pins: 4
• Supplementary Article/Info 2: with seal ring
• Housing Colour: blue
• Switch point from [°C]: 102
• Switch point to [°C]: 90
• Weight [kg]: 0.031
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 05.2001
• Colour: blue
• Supplementary Article/Supplementary Info: with gasket/seal
• Temperature range from [°C]: 84, 91
• Temperature range to [°C]: 95, 102
• Power [W]: 0.06
• Manufacturer: METZGER

• Housing Colour: blue
• Switch point from [°C]: 95
• Switch point to [°C]: 90
• Manufacturer: FAE

• Construction Year to: 05.2001
• Mounting Type: Plugged
• Supplementary Article/Supplementary Info: with gasket/seal
• Switch point from [°C]: 90
• Switch point to [°C]: 102
• Voltage [V]: 12
• Number of pins: 4
• Switch: for double thermal switch
• Combi Switch Function: Dual Output, Normally Open Contact
• Plug Type: Blade Terminal
• Assy./disassy. by qualified personnel required!:
• SVHC: 7439-92-1; Lead
• Name: HE 6ZT181611081
• Manufacturer: HELLA

• Construction Year to: 06.1999
• Vehicle Identification Number (VIN) to: 4BX200000
• Diameter [mm]: 25
• Length [mm]: 50
• Weight [kg]: 0.02, 0.2
• Supplementary Article/Supplementary Info: with gasket/seal
• for OE number: 059 919 501
• Spring Design: Retaining Spring
• Number of pins: 4
• Connector Shape: angular
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Engine Code: AGA
• Name: EP 1.850.692
• Manufacturer: EPS

• Vehicle Identification Number (VIN) from: 4B-Y-000 001
• Number of connectors: 4
• Fitting Depth [mm]: 20
• Manufacturer: BERU BY DRIV