Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Fitting Position: Front Axle
- Section: Upper section
- Manufacturer: JP GROUP
-
Lisainfo: Spring disc,
strut, front axle, upper -
Additional information: Spring disc,
strut, front axle, upper
- Fitting Position: Front Axle
- Section: Lower Section
- Manufacturer: JP GROUP
-
Lisainfo: Spring disc and base,
front axle, lower -
Additional information: Spring disc and base,
front axle, lower
- Fitting Position: Front Axle
- for OE number: 8D0 412 066 F
- Manufacturer: GSP
-
Fitting Position: Front Axle Left,
Front Axle Right, Upper - Material: Sheet Steel
- Quantity per axle: 2
- Manufacturer: TOPRAN
General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.
-
Installatsiooni pool: üleval,
esisild mõlemapoolselt - Name: Coil spring underlayer left=right
- Quality class: PJ
Lisainfo: "Tootja: SRL
AUDI A4/A6/VW PASSAT
(kvaliteediklass: PJ)"
Additional information: "Tootja: SRL
AUDI A4/A6/VW PASSAT
(kvaliteediklass: PJ)"
- Installatsiooni pool: Esisild
- Üldine informatsioon: spring disc; lower
- Manufacturer: VIKA
- Construction Year to: 12.2001
-
Fitting Position: Front Axle Left,
Front Axle Right - Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
-
Installatsiooni pool: Esisild,
esisild paremal, esisild vasakul -
Manufacturer: AUTO-
GH
- Installatsiooni pool: Esisild
-
Kaal (kg): 0,
315 - vajaminev tükihulk: 2
- Üldine informatsioon: front spring disc; upper
- Manufacturer: VIKA
-
Fitting Position: Front Axle,
Upper - Weight [kg]: 0.315
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- Fitting Position: Front Axle
- Weight [g]: 331
- Name: IM 37243
- Manufacturer: ORIGINAL IMPERIUM
- Installatsiooni pool: Esisild
- Pikkus (mm): 358
- Tunnussuurus: E
- Vedrukuju: Kruvivedru
- Välisläbimõõt [mm]: 131
- Jämedus/Tugevus 1 (mm): 13
- Name: CFD 804705
- Manufacturer: DACO
-
Installatsiooni pool: Esisild,
esisild paremal, esisild vasakul -
Manufacturer: AUTO-
GH - Name: GH 204706
- Construction Year to: 12.2001
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- replacement in pairs recommended:
- Manufacturer: MEYLE
- Installatsiooni pool: Esisild
- Pikkus (mm): 358
- Välisläbimõõt [mm]: 131
- Jämedus/Tugevus (mm): 13
- Manufacturer: JAPKO
- Fitting Position: Front Axle
- Length [mm]: 358
- Outer Diameter [mm]: 131
- Thickness [mm]: 13
-
Manufacturer: ASHIKA-
SPREZYNY - Quantity per packing unit: 2
- Installatsiooni pool: Esisild
- Jämedus/Tugevus (mm): 348
-
Kaal (kg): 2,
97 - vajaminev tükihulk: 2
- Siseläbimõõt [mm]: 14
- Välisläbimõõt [mm]: 134
- Välisläbimõõt 1 [mm]: 96
- Üldine informatsioon: coil spring; front
- Manufacturer: VIKA
-
Vehicle Identification Number (VIN) to: 4B-
W- 100000 - Engine Code: AEB
- Block Separation:
-
Vehicle Identification Number (VIN) from: 4B-
W- 100001 -
Installatsiooni pool: esisild vasakul,
esisild paremal, all - vajaminev tükihulk: 2
- Manufacturer: METZGER
for article number: 3B0413031Q, 3B0413031P, 4B0412031BQ, 4B0412031BM, 4B0412031BN
- Installatsiooni pool: Esisild
- Manufacturer: DENCKERMANN FILTRY
- Name: Coil spring
- Quality class: PJ
Lisainfo: "Tootja: TEVEMA
VW PASSAT 96-
(kvaliteediklass: PJ)"
- Installatsiooni pool: Tagasild
- Pikkus (mm): 300
- Välisläbimõõt [mm]: 128
-
Jämedus/Tugevus (mm): 14,
25 - Manufacturer: JAPKO
- Fitting Position: Front Axle
- Parameter: E
- Spring Design: Coil Spring
- Weight [kg]: 2.27
- Thickness 1 [mm]: 13
- Outer Diameter [mm]: 131
- Length [mm]: 358
- Manufacturer: KYB
- Name: KY RH1021
- Additional information: KYBRH1021
- Lisainfo: KYBRH1021
- Fitting Position: Front Axle
- Length [mm]: 360
- Weight [kg]: 2.6
- Spring Design: Coil spring with constant wire diameter
- Outer Diameter [mm]: 132
- Guarantee: 5 years guarantee
- Packaging length [cm]: 43
- Packaging width [cm]: 15
- Packaging height [cm]: 15
- Wire Diameter [mm]: 13
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Length [mm]: 360
- Weight [kg]: 2.7
- Outer Diameter [mm]: 133
- Inner Diameter 1 [mm]: 67
- Inner Diameter 2 [mm]: 66
- Guarantee: 5 years guarantee
- Number of coils: 6.6
- Packaging length [cm]: 40.6
- Packaging width [cm]: 16.7
- Packaging height [cm]: 16.8
- Wire Diameter [mm]: 13.3
- Manufacturer: MONROE
- Fitting Position: Front Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Suspension: for vehicles with standard suspension
- Length [mm]: 346
-
Outer Diameter [mm]: 135,
95.5 - Fitting Position: Front Axle
- Weight [kg]: 2.76
- Wire Diameter [mm]: 14
- Replace in pairs only:
- Manufacturer: FEBI BILSTEIN
General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
-
Installatsiooni pool: esisild vasakul,
esisild paremal - Vedrukuju: Kruvivedru
- ainult paarina välja vahetada:
- Manufacturer: AIC
Üldine informatsioon: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.
- Fitting Position: Rear Axle
- Parameter: AC
- Spring Design: Coil Spring
- Weight [kg]: 2.81
- Thickness 1 [mm]: 14.3
- Outer Diameter [mm]: 128
- Length [mm]: 300
- Manufacturer: KYB
- Name: KY RC6432
- Fitting Position: Rear Axle
- Suspension: for vehicles with standard suspension
- Outer Diameter [mm]: 124
- Length [mm]: 305
- Diameter [mm]: 14.25
- Manufacturer: SACHS
- Lisainfo: 996 958
- Additional information: 996 958
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Transmission Type: Automatic Transmission
- Parameter: E
- Outer Diameter [mm]: 135
- Length [mm]: 355
- Diameter [mm]: 13.85
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Fitting Position: Front Axle
- reinforced version:
- Length [mm]: 345
- Weight [kg]: 3.7
- Outer Diameter [mm]: 134
- Inner Diameter 1 [mm]: 68
- Inner Diameter 2 [mm]: 65
- Guarantee: 5 years guarantee
- Number of coils: 7.3
- Packaging length [cm]: 41.5
- Packaging width [cm]: 15.1
- Packaging height [cm]: 15.2
- Wire Diameter [mm]: 15
- Manufacturer: MONROE
- Fitting Position: Rear Axle
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Fitting Position: Front Axle
- Suspension: for vehicles with standard suspension
- Transmission Type: Manual Transmission
- Parameter: E
- Outer Diameter [mm]: 134
- Diameter [mm]: 13.65
- Length [mm]: 355
- Manufacturer: SACHS
SVHC: No information available, please contact the manufacturer!
- Suspension: for vehicles with standard suspension
- reinforced version:
- Fitting Position: Front Axle
-
Name: BI 36-
266432 - Manufacturer: BILSTEIN
- Name: Coil spring
- Quality class: Q
Lisainfo: "Tootja: SUPLEX
PASSAT SDN/KOMBI (B5
(kvaliteediklass: Q)"
- Fitting Position: Rear Axle
- reinforced version:
- Spring Design: Coil Spring
- Manufacturer: LESJOFORS
- Installatsiooni pool: Tagasild
- tugevdatud variant:
- Vedrukuju: Kruvivedru
- Manufacturer: KILEN
-
madaldus ca [mm]: 40 /
20 - Sõidukivarustus: sõidukitele ilma nivooreguleerijata
-
Loatüüp: ilma TÜV®-
ekspertiisita