Assembly categories
Filters Brake System Axle Steering Cooling / AC Electrics Towbar/Accessories Transmission Exhaust System Body Ignition Engine Windscreen Cleaning Lights Fuel Supply Interior ServiceProduct
Description
In stock
Price
(incl. VAT)
- Pressure [bar]: 1.5
- Manufacturer: ASHIKA
- Colour: blue
- Material: Plastic
- Pressure from [bar]: 1.5
- Weight [kg]: 0.119
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Colour: blue
- Pressure [bar]: 1.4
- Material: Plastic
- Weight [kg]: 0.112
- Manufacturer: VAICO
General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.
- Climate Zones: not for hot climate zones
- Transmission Type: Manual Transmission
-
for PR number: 8Z5,
8Z8 - Material: Aluminium
- Core Length [mm]: 631
- Core Width [mm]: 449
- Core Depth [mm]: 26
- for OE number: 4B0121251L
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
- Manufacturer: NRF
-
Lisainfo: 631*448,
5*26 -
Additional information: 631*448,
5*26
- Construction Year from: 02.1998
- Construction Year to: 05.2001
-
Engine Code: AFB,
AKN -
Transmission Type: 6-
Speed Manual Transmission - Core Depth [mm]: 23
- Core Width [mm]: 396
- Core Length [mm]: 635
- Radiator type: Mechanically jointed cooling fins
- Technical Information: Aluminium core with plastyic tanks
- Name: MM BM1576
- Manufacturer: MAGNETI MARELLI
- Transmission Type: Automatic Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Core Length [mm]: 630
- Core Width [mm]: 450
- Core Depth [mm]: 30
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Brazed cooling fins
- Packaging length [cm]: 80
- Packaging width [cm]: 56
- Packaging height [cm]: 14
- Weight [kg]: 4.3
- Manufacturer: AKSDASIS
-
Climate Zones: not for hot climate zones,
for hot climate zones -
Transmission Type: 5-
Speed Automatic Transmission -
for PR number: 8Z5,
8Z8, 8Z6 - Block Separation:
- Material: Aluminium
-
Heating/Cooling: for vehicles with combined radiator/
oil cooler - Core Length [mm]: 631
- Core Width [mm]: 449
- Core Depth [mm]: 26
- for OE number: 4B0121251AE
- Supplementary Article/Info 2: with seal ring
- Radiator type: Brazed cooling fins
-
Lisainfo: 631*448,
5*26 -
Additional information: 631*448,
5*26
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 632
- Core Width [mm]: 449
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with gaskets/
seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
- Name: NI 60422A
-
Lisainfo: AUDI A 6 /
S 6 (C5) (97- ) 2.5 TDi -
Additional information: AUDI A 6 /
S 6 (C5) (97- ) 2.5 TDi
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
- Transmission Type: Manual Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Construction Year to: 05.2001
- Core Depth [mm]: 26
- Core Length [mm]: 630
- Core Width [mm]: 450
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Technical Information: quick connection inlet/
outlet - Name: Radiator
- Quality class: PJ
Lisainfo: A6 97-01 (kvaliteediklass PJ) Additional information: A6 97-01 (kvaliteediklass PJ)
- Transmission Type: Manual Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 26
- Core Length [mm]: 632
- Core Width [mm]: 448
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
Technical Information: Install in Minutes! Box includes all extras like O-rings, clips, and washers
- Transmission Type: Automatic Transmission
- Cooling fins material: Aluminium
- Water Tank Material (radiator): Plastic
- Radiator type: Mechanically jointed cooling fins
- Core Length [mm]: 630
- Core Width [mm]: 452
- Core Depth [mm]: 34
- Manufacturer: ABAKUS
General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.
- Transmission Type: Manual Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Core Length [mm]: 630
- Core Width [mm]: 450
- Core Depth [mm]: 30
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Brazed cooling fins
- Packaging length [cm]: 86
- Packaging width [cm]: 57.5
- Packaging height [cm]: 15
- Weight [kg]: 3.962
- Manufacturer: AKSDASIS
- Radiator type: Brazed cooling fins
- Core Length [mm]: 630
- Core Width [mm]: 412
- Core Depth [mm]: 34
- Water Tank Material (radiator): Plastic
- Cooling fins material: Aluminium
- Supplementary Article/Info 2: with quick couplers
- Packaging height [cm]: 17
-
Net Weight [g]: 4,
319 - Packaging width [cm]: 54.5
- Packaging length [cm]: 83.5
- Name: MH CR132000S
- Manufacturer: MAHLE
General Information: The core dimensions / product measurements of the different manufacturers /vendors might be different due to various production technologies. These dimensions / product measurements are not an indication for the performance or the correct fitting accuracy of the product itself.
- Transmission Type: Automatic Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 30
- Core Length [mm]: 632
- Core Width [mm]: 454
- Radiator type: Brazed cooling fins
- Supplementary Article/Supplementary Info: with oil cooler
- Water Tank Material (radiator): Plastic
- Transmission Type: Automatic Transmission
- Cooling fins material: Aluminium
- Core Depth [mm]: 32
- Core Length [mm]: 632
- Core Width [mm]: 449
- Inlet Ø [mm]: 32.6
- Outlet Ø [mm]: 32.6
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with oil cooler,
with gaskets/ seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 6 /
S 6 (C5) (97- ) 2.5 TDi -
Additional information: AUDI A 6 /
S 6 (C5) (97- ) 2.5 TDi
Installation Information: FIRST FIT - a time-saving installation! Find all additional parts such as caps, gaskets, nuts, clamps, plugs, bolts, fittings, screws and other parts in the box
- Construction Year from: 02.1998
- Construction Year to: 05.2001
- Transmission Type: Manual Transmission
- for OE number: 8D0121251M
- Material: Aluminium
-
Weight [g]: 4,
120 - Frame Material: Plastic
- Core Length [mm]: 631
- Core Width [mm]: 399
- Core Depth [mm]: 33
-
Gross Weight [g]: 5,
800 -
alternative item: -
- Manufacturer: DENSO
- Transmission Type: Automatic Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Construction Year to: 05.2001
- Core Depth [mm]: 26
- Core Length [mm]: 630
- Core Width [mm]: 450
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Technical Information: quick connection inlet/
outlet - Name: Radiator
- Quality class: PJ
Lisainfo: A6 01-04 (kvaliteediklass PJ) Additional information: A6 01-04 (kvaliteediklass PJ)
- Core Length [mm]: 682
- Core Width [mm]: 440
- Core Depth [mm]: 43
- Inlet Ø [mm]: 32
- Outlet Ø [mm]: 32
- Radiator type: Brazed cooling fins
- Packaging length [cm]: 88.6
- Packaging width [cm]: 54.2
- Packaging height [cm]: 16.8
- Weight [kg]: 5.362
- Manufacturer: AKSDASIS
- Transmission Type: Automatic Transmission
-
Vehicle Equipment: for vehicles with/
without air conditioning - Construction Year to: 06.2001
- Core Depth [mm]: 40
- Core Length [mm]: 682
- Core Width [mm]: 438
- Radiator type: Brazed cooling fins
- Water Tank Material (radiator): Plastic
-
Technical Information: quick connection inlet/
outlet - Name: Radiator
- Quality class: PJ
Lisainfo: A6 97-01 (kvaliteediklass PJ) Additional information: A6 97-01 (kvaliteediklass PJ)
- Cooling fins material: Aluminium
- Core Depth [mm]: 40
- Core Length [mm]: 682
- Core Width [mm]: 438
- Inlet Ø [mm]: 32.5
- Outlet Ø [mm]: 32.5
- Radiator type: Brazed cooling fins
-
Supplementary Article/Info 2: without cap,
without expansion tank -
Supplementary Article/Supplementary Info: with oil cooler,
with gaskets/ seals - Water Tank Material (radiator): Plastic
- Manufacturer: NISSENS
-
Lisainfo: AUDI A 6 /
S 6 (C5) (97- ) 3.7 i -
Additional information: AUDI A 6 /
S 6 (C5) (97- ) 3.7 i
- Construction Year to: 05.2001
- Transmission Type: Manual Transmission
- Weight [kg]: 6
- for OE number: 4B0121251AE
- Material: Aluminium
-
Weight [g]: 4,
094 - Frame Material: Plastic
- Core Length [mm]: 630
- Core Width [mm]: 399
- Core Depth [mm]: 28
-
Gross Weight [g]: 5,
774 -
alternative item: -
- Manufacturer: DENSO
Laki Auto universal products
TecDoc catalogue for cars
TecDoc catalogue for trucks