• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk, kuvatakse 1tk hind
• Additional information: PAKENDIS 10 tk, kuvatakse 1tk hind

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle Left, Rear Axle Right
• Material: Thermoplast
• Manufacturer: JP GROUP
• Lisainfo: PAKENDIS 10 tk
• Additional information: PAKENDIS 10 tk

• Construction Year to: 12.2004
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Fitting Position: Front Axle
• Material: Thermoplast
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Fitting Position: Front Axle
• Weight [kg]: 0.04
• Thickness [mm]: 80
• Required quantity: 2
• General Information: protective pipe; front
• Manufacturer: VIKA

• Suspension: for vehicles without bad road version
• Fitting Position: Rear Axle
• Material: Thermoplast
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• for OE number: 4D0412137B
• Fitting Position: Front Axle
• Height [mm]: 80
• Material: Plastic
• Weight [g]: 38
• Inner Diameter 1 [mm]: 39
• Inner Diameter 2 [mm]: 63
• Name: IM 37423
• Manufacturer: ORIGINAL IMPERIUM

• Thickness [mm]: 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.04
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fabrication Number: ZTP-VW-008B
• Manufacturer: NTY

• Thickness [mm]: 80
• Material: Thermoplast
• Fitting Position: Front Axle
• Weight [kg]: 0.04
• Name: SW 30 93 6728
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• for OE number: 893512137
• Fitting Position: Rear Axle
• Height [mm]: 134
• Material: Thermoplast
• Weight [g]: 51
• Diameter 1 [mm]: 36
• Diameter 2 [mm]: 57
• Name: IM 37422
• Manufacturer: ORIGINAL IMPERIUM

• Suspension: for vehicles with electronic suspension control
• Thickness [mm]: 157
• Material: PE (Polyethylene)
• Fitting Position: Rear Axle
• Weight [kg]: 0.05
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: without spring seat
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Vehicle Identification Number (VIN) to: 4B#Y#200000
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Design: Spring-bearing Damper
• Name: CFD 454701
• Manufacturer: DACO

Suspension: for vehicles without sports suspension, for vehicles without bad road version

• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA

• Fitting Position: Front Axle
• Supplementary Article/Supplementary Info: with spring seat
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Top pin
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAMOKA AMORTYZATORY

• Fitting Position: Front Axle
• Suspension: for vehicles with sports suspension
• Vehicle Identification Number (VIN) from: 4B-Y-160 001
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Suspension: for vehicles with sports suspension
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• for OE number: 3B0 413 031 AB
• Manufacturer: ABAKUS LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis. The product is intended for use within the performance limits specified by the manufacturer and should only be used by qualified personnel who have been trained to operate this product. Before each use, the product should be checked for damage or fixing of its parts and not used if any defects or loose parts are found. Failure to follow the manufacturer's guidelines could result in potential product damage or even injury. Wear appropriate protective clothing if necessary when working with the product.

• Suspension: for vehicles with standard suspension
• Construction Year to: 12.2000
• Vehicle Identification Number (VIN) to: 4B-Y-200 000
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom Fork, Top pin
• Shock Absorber System: Twin-Tube
• Name: shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
AUDI A4/A6/PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
AUDI A4/A6/PASSAT
(kvaliteediklass: PJ)"

• Fitting Position: Front Axle, Front Axle Right, Front Axle Left
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Article number of recommended accessories: GH-694707
• Shock Absorber Design: Spring-bearing Damper, Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Manufacturer: AUTO-GH

• Suspension: for vehicles with standard suspension
• Construction Year from: 01.2001
• Vehicle Identification Number (VIN) from: 4B-1- 000 001
• Shock Absorber Type: Gas Pressure
• Fitting Position: Front Axle
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom Fork, Top pin
• Shock Absorber System: Twin-Tube
• Name: Gas shock absorber
• Quality class: PJ

Lisainfo: "Tootja: SRL
A6/SUPERB/PASSAT
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A6/SUPERB/PASSAT
(kvaliteediklass: PJ)"

• Construction Year to: 12.2004
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Article number of recommended accessories: SMA0156
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Vehicle Identification Number (VIN) from: 4B-X-070 001
• Vehicle Identification Number (VIN) to: 4B-Y-160 000
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber System: Twin-Tube
• Manufacturer: DENCKERMANN AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Lisainfo: Shock absorber, front, gas
• Additional information: Shock absorber, front, gas

• Fitting Position: Front Axle
• Length [mm]: 598
• Length 2 [mm]: 459
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 45
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 6301G

• Construction Year to: 12.2004
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: SMJ0156
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Construction Year to: 12.2004
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Article number of recommended accessories: SMJ0156
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: JAPKO

• Vehicle Identification Number (VIN) to: 4B-X-070 000
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Suspension Strut Insert
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber System: Twin-Tube
• Manufacturer: JP GROUP
• Lisainfo: Shock Absorber
• Additional information: Shock Absorber

• Construction Year to: 12.2004
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Article number of recommended accessories: SMA0156
• Shock Absorber Design: Telescopic Shock Absorber
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Front Axle
• Length [mm]: 592
• Length 2 [mm]: 463
• Shock Absorber Design: Suspension Strut
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Diameter 1 [mm]: 45
• Diameter 2 [mm]: 30
• Spring Type: for vehicles with coil spring suspension
• Manufacturer: MAGNETI MARELLI
• Name: MM 6302G

• Vehicle Identification Number (VIN) to: 4B-W-100 000
• Fitting Position: Front Axle
• Amorditüüp: Gaasirõhk
• Amort-Ehitusliik: Teleskoop-amort
• Amort-kinnitusliik: ülemine tihvt, Hargi all
• Manufacturer: OYODO

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Article number of recommended accessories: SMA0156
• Shock Absorber Design: Suspension Strut
• Manufacturer: ASHIKA-AMORTYZATORY

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Article number of recommended accessories: SMJ0156
• Shock Absorber Design: Suspension Strut
• Manufacturer: JAPKO

• Construction Year to: 01.1999
• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Diameter [mm]: 49
• Length 1 [mm]: 599
• Length 2 [mm]: 458
• Piston Rod Diameter [mm]: 14
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Construction Year to: 12.2000
• Vehicle Identification Number (VIN) to: 4B-Y-200 000
• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• not for PR number: 1BV
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-045771
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
AUDI A6, 97-
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) to: 4B#Y#200000
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Design: Spring-bearing Damper
• Manufacturer: KAYABA AMORTYZATORY
• Name: KY 9410012

Suspension: for vehicles without bad road version, for vehicles without sports suspension

• Construction Year to: 01.1999
• Shock Absorber Type: Gas Pressure
• Shock Absorber Mounting Type: Bottom Fork, Top pin
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Fitting Position: Front Axle
• Weight [kg]: 2.89
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 12.2004
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Design: Spring-bearing Damper
• Manufacturer: KAYABA AMORTYZATORY

• Vehicle Identification Number (VIN) from: 4B#X#070001
• Vehicle Identification Number (VIN) to: 4B#Y#200000
• Block Separation:
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAYABA AMORTYZATORY

Suspension: for vehicles without bad road version, for vehicles with sports suspension

• Construction Year from: 01.2001
• Vehicle Identification Number (VIN) from: 4B-1- 000 001
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-119939
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
VW PASSAT/AUDI A6
(kvaliteediklass: Q)"

• Fitting Position: Rear Axle
• Spring Type: for vehicles with air suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Bottom eye, Top pin
• Weight [kg]: 3.1
• Length 1 [mm]: 351
• Length 2 [mm]: 475
• Article number of recommended accessories: MK187
• Packaging length [cm]: 62
• Packaging width [cm]: 13
• Packaging height [cm]: 13.8
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension Guarantee: 5 years guarantee with accessories when replaced in pairs

• Vehicle Identification Number (VIN) to: 4B#Y#200000
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Design: Spring-bearing Damper
• Manufacturer: KYB
• Name: KY 341842

Suspension: for vehicles without bad road version, for vehicles without sports suspension

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Weight [kg]: 3
• Bore Diameter [mm]: 35
• Length 1 [mm]: 461
• Length 2 [mm]: 597
• Piston Rod Diameter [mm]: 15.8
• Article number of recommended accessories: MK190, PK088
• Packaging length [cm]: 57.1
• Packaging width [cm]: 17
• Packaging height [cm]: 17
• Manufacturer: MONROE

Suspension: for vehicles with standard suspension, for vehicles with sports suspension Guarantee: 5 years guarantee with accessories when replaced in pairs

• Construction Year to: 12.2000
• Vehicle Identification Number (VIN) to: 4B-Y-200 000
• Suspension: for vehicles with standard suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
AUDI A4/A6/PASSAT
(kvaliteediklass: Q)"

• Construction Year from: 05.2000
• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 4B#1#000001
• Suspension: for vehicles with heavy duty suspension
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Weight [kg]: 3
• Bore Diameter [mm]: 35
• Length 1 [mm]: 457
• Length 2 [mm]: 559
• Piston Rod Diameter [mm]: 15.8
• Article number of recommended accessories: MK190, PK088
• Packaging length [cm]: 62
• Packaging width [cm]: 13.8
• Packaging height [cm]: 13.8
• Manufacturer: MONROE

Guarantee: 5 years guarantee with accessories when replaced in pairs

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Yoke
• Diameter [mm]: 49
• Length 1 [mm]: 599
• Length 2 [mm]: 458
• Piston Rod Diameter [mm]: 14
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Vehicle Identification Number (VIN): [4B-1-000001;]
• Suspension: for vehicles with sports suspension
• Fitting Position: Right, Left, Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin
• max. length [mm]: 602
• min. length [mm]: 443
• Standpipe Diameter [mm]: 45
• Piston Rod Diameter [mm]: 15
• Piston Rod Thread: M12X125
• Manufacturer: SNR AMORTYZATORY

• Construction Year to: 12.2004
• Suspension: for vehicles without bad road version
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Design: Telescopic Shock Absorber
• Suspension Strut Outer Diameter [mm]: 47
• Manufacturer: KYB
• Additional information: KYB341844
• Lisainfo: KYB341844

General Information: Please refer to the technical drawing in "Documents"

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Length 1 [mm]: 590
• Length 2 [mm]: 458
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Vehicle Identification Number (VIN) from: 4B-Y-160 001
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SEXOV32/15X83A
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Manufacturer: SACHS
• Name: SHS 557837

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Quantity per packing unit: 2
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Length 1 [mm]: 596
• Length 2 [mm]: 453
• Quantity per axle: 1
• Observe technical data:
• Manufacturer: TRW AMORTYZATORY

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Suspension: for vehicles with standard suspension
• Vehicle Identification Number (VIN) from: 4B-X-070 001
• Vehicle Identification Number (VIN) to: 4B-Y-160 000
• Shock Absorber Design: Telescopic Shock Absorber
• Parameter: SEXOV32X83A
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Name: shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
VW PASSAT 96-
(kvaliteediklass: Q)"

• Vehicle Identification Number (VIN) from: 4B#X#070001
• Vehicle Identification Number (VIN) to: 4B#Y#200000
• Block Separation:
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber Design: Suspension Strut
• Manufacturer: KAYABA AMORTYZATORY

Suspension: for vehicles without bad road version, for vehicles with sports suspension

• Fitting Position: Rear Axle
• Suspension: for vehicles with standard suspension
• Vehicle Identification Number (VIN) to: 4B-X-070 000
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Parameter: SEXOV32X117A
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Rear Axle
• Suspension: for vehicles with sports suspension
• Vehicle Identification Number (VIN) from: 4B-W-030 001
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom eye
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Parameter: SEXOV32X117A
• Manufacturer: SACHS

SVHC: No information available, please contact the manufacturer!

• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Telescopic Shock Absorber
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• General Information: gas-filled shock absorber; front
• Manufacturer: BORSEHUNG

• Construction Year to: 12.2004
• Vehicle Identification Number (VIN) from: 4B#1#000001
• Suspension: for vehicles with bad road version
• Spring Type: for vehicles without air suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber System: Twin-Tube
• Shock Absorber Mounting Type: Top pin
• Shock Absorber Design: Telescopic Shock Absorber
• Suspension Strut Outer Diameter [mm]: 55
• Manufacturer: KAYABA AMORTYZATORY

General Information: Please refer to the technical drawing in "Documents"

• Construction Year to: 12.2000
• Vehicle Identification Number (VIN) to: 4B-Y-200 000
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• not for PR number: 1BV
• Shock Absorber System: Twin-Tube
• Manufacturer: BILSTEIN
• Name: BI 19-184067
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles with sports suspension Additional information: "Tootja: BILSTEIN
AUDI A6 QUATTRO
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A6 QUATTRO
(kvaliteediklass: Q)"

• Construction Year from: 01.2001
• Vehicle Identification Number (VIN) from: 4B-1-000001
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• Shock Absorber System: Monotube
• Name: BI 24-065085
• Manufacturer: BILSTEIN
• Quality class: Q

Suspension: for vehicles with standard suspension, for vehicles without sports suspension Additional information: "Tootja: BILSTEIN
AUDI A6 KOMBI 97-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A6 KOMBI 97-
(kvaliteediklass: Q)"

• Construction Year from: 12.1998
• Vehicle Identification Number (VIN) from: 4B-1-000001, 4B-W-070 001
• Vehicle Identification Number (VIN) to: 4B-Y-200 000
• Suspension: for vehicles with sports suspension
• Fitting Position: Rear Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Bottom eye, Top pin
• not for PR number: 1BV
• Shock Absorber System: Monotube
• Manufacturer: BILSTEIN
• Name: BI 24-065115
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI/ VW
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI/ VW
(kvaliteediklass: Q)"

• Construction Year from: 01.2001
• Vehicle Identification Number (VIN) from: 4B-1-000001
• Suspension: for vehicles with sports suspension
• Fitting Position: Front Axle
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design: Spring-bearing Damper
• Shock Absorber Mounting Type: Top pin, Bottom Fork
• not for PR number: 1BV
• Shock Absorber System: Monotube
• Name: BI 24-065108
• Manufacturer: BILSTEIN
• Quality class: Q

Additional information: "Tootja: BILSTEIN
AUDI A6 ' 97-
(kvaliteediklass: Q)" Lisainfo: "Tootja: BILSTEIN
AUDI A6 ' 97-
(kvaliteediklass: Q)"

• Name: shock absorber
• Quality class: Q

Lisainfo: "Tootja: BILSTEIN
AUDI/ VW
(kvaliteediklass: Q)"