• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Fabrication Number: KLP-AU-004
• Rim Size [inch]: 16.0
• Name: NTY KLP-AU-004
• Manufacturer: NTY

Fitting Position: Rear Axle, Front Axle Left, Front Axle Right, Front Axle Transmission Type: 5-Speed Manual Transmission, 5-Speed Automatic Transmission, Manual Transmission

• Construction Year to: 12.2001
• Vehicle Identification Number (VIN) from: F 4B-Y-000 001
• Vehicle Identification Number (VIN) to: F 4B-X-200 000
• Fitting Position: Rear Axle
• for OE number: 4B0 598 625 B
• Weight [kg]: 0.845
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 39
• Inner Diameter 2 [mm]: 41
• Weight [kg]: 0.7
• Outer Diameter 1 [mm]: 75
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Fitting Position: Rear Axle
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Width 1 [mm]: 37
• Outer Diameter 1 [mm]: 82
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Manufacturer: GSP

Fitting Position: Rear Axle Left, Rear Axle Right, Front Axle Left, Front Axle Right

• Fitting Position: Front Axle
• Width [mm]: 37
• Outer Diameter [mm]: 82
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Construction Year to: 05.2001
• Fitting Position: Front Axle
• Outer Diameter [mm]: 82
• Height [mm]: 37
• Inner Diameter [mm]: 43
• Weight [kg]: 0.768
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Width [mm]: 37
• Outer Diameter [mm]: 82
• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 43
• Supplementary Article/Info 2: with screw
• Inner Diameter 2 [mm]: 45
• Lisainfo: Wheel bearing kit, for one front wheel
• Additional information: Wheel bearing kit, for one front wheel

• Fitting Position: Tandem-axle Assembly
• Construction Year to: 09.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Tyre Size: 16
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter 1 [mm]: 82
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Front Axle both sides, Front Axle, Rear Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.87
• Bolt Hole Circle Ø 1 [mm]: 112
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV438

• Fitting Position: Front Axle
• Construction Year from: 05.2001
• Construction Year to: 09.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Rim Size [inch]: 16
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Quality class: PJ
• Name: Wheel bearing kit

• Fitting Position: Rear Axle, Front Axle
• Block Separation:
• Construction Year from: 05.2001
• Construction Year to: 09.2001, 05.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Rim Size [inch]: 16.0
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Inner Diameter 1 [mm]: 45
• Manufacturer: OPTIMAL

• Fitting Position: Front Axle
• Width [mm]: 37
• Weight [kg]: 0.84
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: METALCAUCHO

• Fitting Position: Rear Axle, Front Axle
• Outer Diameter [mm]: 82
• Quantity Unit: Set
• Inner Diameter [mm]: 43
• Weight [kg]: 0.694
• Manufacturer: VAICO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Fitting Position: Front Axle Left, Front Axle Right
• Trim Level: FRRE LR+FR
• for OE number: 4D0407625E
• Inner Diameter [mm]: 43
• Width 1 [mm]: 37
• Number of mounting bores: 1
• Name: DA KWD1060
• Manufacturer: DAYCO

• Outer Diameter [mm]: 82
• Fitting Position: Front Axle, Front Axle Left, Front Axle Right
• Fabrication Number: KLP-AU-006
• Rim Size [inch]: 17.0, 18.0
• Manufacturer: NTY
• Name: NTY KLP-AU-006

• Model Year from: 1998
• Model Year to: 2001
• Fitting Position: Rear Axle
• Weight [kg]: 0.965
• Supplementary Article/Info 2: without wheel hub
• Packaging length [cm]: 11.2
• Packaging width [cm]: 8.6
• Packaging height [cm]: 3.8
• Manufacturer: FEBEST

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Supplementary Article/Info 2: without flange
• Width [mm]: 40.3
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: DENCKERMANN ZAWIESZENIE
• Lisainfo: W413307 DKM
• Additional information: W413307 DKM

• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.76
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV436

• Engine Code: AKN
• Vehicle Identification Number (VIN) from: ******4B*2*000001
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Sealing lip material: NBR (nitrile butadiene rubber)
• Bearing Type: Angular Ball Bearing
• Fitting Position: Rear Axle Left, Rear Axle Right
• Weight [kg]: 0.806
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 06.2001
• Construction Year to: 09.2001
• Fitting Position: Front Axle
• Guarantee: 4 years guarantee
• Weight [kg]: 1.7
• Number of Holes: 4
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 29SKV029

• Fitting Position: Front Axle Left, Front Axle Right
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Weight [kg]: 0.84
• Outer Diameter 1 [mm]: 82
• Width 1 [mm]: 37
• Manufacturer: A.B.S.

• Tyre Size: 17/18
• Construction Year from: 06.2001
• Fitting Position: Front Axle
• Width [mm]: 40.25
• Inner Diameter [mm]: 43
• Outer Diameter 1 [mm]: 84
• Outer Diameter 2 [mm]: 127
• Number of mounting bores: 4
• Manufacturer: METELLI LOZYSKA KOLA PIASTY

• Fitting Position: Right, Left, Rear Axle
• Manufacturer: SNR
• Name: SN R157.14

• Fitting Position: Front Axle Left, Front Axle Right
• Version: One
• Thread Size: M12X1,5
• Inner Diameter [mm]: 45
• Rim Hole Number: 4
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Manufacturer: GSP

• Width [mm]: 37
• Inner Diameter [mm]: 43, 45
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.202
• Supplementary Article/Supplementary Info: with nuts, with motor shaft screw
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Rear Axle
• Required quantity: 2
• Width [mm]: 37
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Manufacturer: SKF
• Name: SK VKBA1356

• Fitting Position: Front Axle
• Inner Diameter 1 [mm]: 43
• Manufacturer: KAMOKA PRZEGUBY PÓ£OSIE PIASTY

• Width [mm]: 37
• Inner Diameter [mm]: 43, 45
• Outer Diameter [mm]: 82
• Bearing Type: Angular Ball Bearing
• Fitting Position: Front Axle Left, Front Axle Right
• Weight [kg]: 1.202
• Supplementary Article/Supplementary Info: with motor shaft screw, with nuts
• Name: SW 30 10 0725
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Fitting Position: Front Axle Left, Front Axle Right
• Thread Size: M12X1,5
• Inner Diameter [mm]: 45
• Rim Hole Number: 4
• Inner Diameter 1 [mm]: 43
• Inner Diameter 2 [mm]: 45
• Manufacturer: GSP

• Fitting Position: Front Axle
• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Width [mm]: 40.3
• Inner Diameter [mm]: 43
• Quality class: PJ
• Name: Wheel hub

• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 37
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Fitting Position: Right, Left, Front Axle
• Manufacturer: SNR /NTN-SNR/
• Name: SN R157.24

• Fitting Position: Front Axle
• Construction Year to: 07.2001
• Block Separation:
• Construction Year from: 09.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Rim Size [inch]: 15.0, 16.0
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Width [mm]: 37
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610350

• Fitting Position: Rear Axle
• Manufacturer: DELLO AUTOMEGA

• Construction Year from: 06.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Rim Size [inch]: 17, 18
• Block Separation:
• Vehicle Identification Number (VIN) from: 4B-2-031501
• Fitting Position: Front Axle Left, Front Axle Right
• Quantity per axle: 2
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Supplementary Article/Info 2: with bolts/screws
• Full Set:
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Construction Year to: 05.2001
• Fitting Position: Front Axle, Rear Axle
• Required quantity: 2
• Block Separation:
• Weight [kg]: 1.056
• Packaging length [cm]: 10.9
• Packaging width [cm]: 8.4
• Packaging height [cm]: 10.9
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Width [mm]: 37
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Vehicle Identification Number (VIN) to: ******4B*2*031500
• Fitting Position: Front Axle
• Rim Size [inch]: 17.0, 18.0
• Block Separation:
• Vehicle Identification Number (VIN) from: ******4B*2*031501
• Width [mm]: 40
• Bearing Type: Angular Ball Bearing
• Outer Diameter 1 [mm]: 82
• Outer Diameter 2 [mm]: 85
• Inner Diameter 1 [mm]: 43
• Weight [kg]: 1.57
• Inner Diameter 2 [mm]: 45
• Supplementary Article/Supplementary Info: with motor shaft screw
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Supplementary Article/Info 2: with bolts/screws
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 45
• Fitting Position: Front Axle Left, Front Axle Right
• Manufacturer: AIC

General Information: Our products are usually delivered without installation instructions. Installation may only be carried out by trained specialist technicians. Products supplied by us are exclusively intended for proper and appropriate use. The warranty is void in the event of improper, contrary to the intended purpose or unsuitable application or use. For electronic items that leave fault memory entries, it is essential to submit fault memory logs in the event of a claim. This consequently concerns all electronic items that are detected, monitored and controlled by the engine control unit, such as sensors of all kinds (e.g. NOX sensors, ABS sensors), mass airflow sensors, airbag slip rings, headlamp levelling control units, throttle valves, lambda sensors or EGR modules. If you encounter difficulties during a repair (troubleshooting max. 1 hr.), please contact technical support at: Phone: 040 - 25 30 66 55 Email: service@aic-germany.de This often avoids extensive troubleshooting that is disproportionate to normal repair times. The following applies to complaints: The more complete the processes are submitted, the faster they can be processed. Complete documentation includes the warranty application (incl. KBA no., chassis no., first registration, engine code, mileage), first and second installation invoice, fault memory log, guided troubleshooting and, if applicable, pictures. Incomplete documentation may result in rejection of the claim.

• Construction Year to: 05.2001
• Fitting Position: Front Axle
• Required quantity: 2
• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Weight [kg]: 1.613
• Packaging length [cm]: 13.7
• Packaging width [cm]: 13.1
• Packaging height [cm]: 7.3
• Supplementary Article/Info 2: without flange
• Outer Diameter [mm]: 82
• Inner Diameter [mm]: 43
• Width [mm]: 40.2
• Manufacturer: CONTITECH-LOÅ»YSKA KÓŁ

• Fitting Position: Rear Axle
• Construction Year from: 09.2001
• Special Purpose Vehicle: for armoured vehicles
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter 1 [mm]: 85
• Inner Diameter [mm]: 43
• Width [mm]: 40.3
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610380

• Fitting Position: Front Axle
• Construction Year from: 09.2001
• Vehicle Identification Number (VIN) to: 4B-2-031500
• Rim Size [inch]: 17.0, 18.0
• Block Separation:
• Vehicle Identification Number (VIN) from: 4B-2-031501
• Suspension: for vehicles with heavy duty suspension
• Supplementary Article/Supplementary Info: Photo corresponds to scope of supply
• Outer Diameter 1 [mm]: 85
• Inner Diameter [mm]: 43
• Inner Diameter 2 [mm]: 45
• Width [mm]: 40.3
• SVHC: No SVHC present!
• Manufacturer: FAG
• Name: LU 713610430

• Vehicle Identification Number (VIN) from: 4B-W-100 001
• Fitting Position: Front Axle
• Required quantity: 2
• Width [mm]: 40.25
• Inner Diameter [mm]: 43
• Outer Diameter [mm]: 82
• Supplementary Article/Info 2: without flange
• Manufacturer: SKF
• Name: SK VKBA3536

• Fitting Position: Right, Left, Rear Axle
• No. of holes 1: 5
• No. of holes 2: 5
• Supplementary Article/Info 2: with rubber mount
• Inner Diameter 1 [mm]: 39
• Outer Diameter 1 [mm]: 130
• Width 1 [mm]: 127
• Manufacturer: SNR