• Number of pins: 2
• Colour: blue
• Manufacturer: JP GROUP
• Lisainfo: Temperature sensor for cooling system, 2 pins
• Additional information: Temperature sensor for cooling system, 2 pins

• Number of pins: 1
• Thread Size: M10x1 mm
• Spanner Size: 13 mm
• for OE number: 049919563B
• Manufacturer: KAMOKA
• Additional information: 4080049 KAMOKA
• Lisainfo: 4080049 KAMOKA

• Pistikkontaktide arv: 2
• Piirangutega toode/piirangu info 2: ilma kaablita
• Pistikukatte kuju: ristkülik
• Seerianumber: ECP-AU-027
• Manufacturer: NTY

• Vehicle Equipment: for vehicles with automatic climate control
• Connector Shape: rectangular
• Sensor Type: NTC Sensor
• Number of pins: 2
• Colour Coding: blue
• Manufacturer: TOPRAN HANS PRIES
• Lisainfo: 100 191 HP
• Additional information: 100 191 HP

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of pins: 2
• Manufacturer: ABAKUS DEPO/LORO

General Information: The following information is for general and informational purposes only and does not constitute warranty terms. Warranty terms and conditions are available from our dealers and in our general terms and conditions of sale. Abakus spare/repair parts are intended only for vehicle repairs in order to restore their original functionality. Abakus spare/repair parts are used or sold to users only for the purpose of repairing vehicles to restore their original look and functionality and are not original/genuine/OE/OEM/OES replacement parts. These items do not originate from the vehicle manufacturer and may be the subject of a design not owned by Abakus. They may only be used for repairs to restore the intended vehicle to its original appearance. Our products are delivered without instruction of installation. Installation of our product may only be carried out by trained specialist technicians in specific car repairs. Products supplied by us are exclusively intended for proper and appropriate use. The warranty may become invalid in the event of: improper installation or repair, unsuitable application or use, installation or repair made outside specialist car workshops. Warranty claims are lost if the vehicle is modified and used for motor sports, tuning or similar events (except our tuning parts which are described in TecDoc and on our price list). Warranty application should include complete documentation among others: chassis no., first registration, vehicle mileage, information about LPG installation, fault memory log, pictures, our QC (quality check) code, installation invoice, contact details of the car repair workshop performing the replacement or repair. Warranty application are available in our Client Panel system. Complaints may require supplementing data such as error memory logs. Incomplete documentation may result in rejection of the claim. Any damage caused during transport is not considered quality damage and will be considered on an individual basis.

• Housing Colour: blue
• for OE number: 025906041A
• Manufacturer: KAMOKA

• Colour Coding: blue
• Number of pins: 1
• Measuring Range to [°C]: 180
• Thread Size: M 10
• Thread Pitch [mm]: 1
• Supplementary Article/Info 2: with seal ring
• Manufacturer: TOPRAN

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Model Year from: 1995
• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,05
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Name: CE 17SKV555
• Manufacturer: ESEN SKV

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission, 4-Speed Automatic Transmission

• Fitting Position: Front Axle
• Quantity: 1
• Üldine informatsioon: distance sensor
• Manufacturer: VIKA

• Operating voltage [V]: 12
• Sensor Type: Passive sensor
• Combi Switch Function: Reed Contact
• Supplementary Article/Info 2: without cable
• Number of pins: 2
• Lisainfo: Distance sensor
• Additional information: Distance sensor

• Number of pins: 3
• Switch Point [°C]: 120
• Colour: grey
• Manufacturer: JP GROUP
• Lisainfo: Sender for water temperature gauge 3 pins
• Additional information: Sender for water temperature gauge 3 pins

• Quantity per packing unit: 3
• Ühenduste arv: 2
• Manufacturer: 3RG

• Thread Size: M10 x 1
• Spanner Size: 14
• Supplementary Article/Supplementary Info: with seal
• Number of pins: 1
• Colour Coding: blue
• Weight [kg]: 0.019
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: rectangular
• Number of pins: 2
• for OE number: 025906041A
• Supplementary Article/Info 2: with mounting parts
• Manufacturer: NRF

• Weight [g]: 15
• Name: IM 5309
• Manufacturer: ORIGINAL IMPERIUM

• Engine Code: ABK
• Number of pins: 1
• Thread Size: M10x1
• Spanner Size: 13
• Corresponds to the original part in colour: blue
• Name: EP 1.830.093
• Manufacturer: EPS

• Block Separation:
• Number of pins: 2
• Connector Shape: rectangular
• Supplementary Article/Info 2: without cable
• Manufacturer: TOPRAN

Transmission Type: Manual Transmission, 4-Speed Automatic Transmission General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Number of connectors: 2
• Colour: blue
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ABK
• Colour: blue
• Manufacturer: FACET

• Engine Code: ABK
• Colour: blue
• Name: EP 1.830.101
• Manufacturer: EPS

• Thread Size: 20 mm
• Manufacturer: VERNET

• Length [mm]: 37
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• for OE number: 025 906 041 A
• Supplementary Article/Supplementary Info: with seal
• Colour Coding: blue
• Number of pins: 2
• Manufacturer: VEMO GERMANY

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Switch Point [°C]: 125
• Thread Size: 20 mm
• Manufacturer: VERNET

• Keermemõõt: M20
• Pistikkontaktide arv: 2
• Pistikukatte kuju: ristkülik
• Manufacturer: ERA

• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• External Thread Size: M10 x 1
• Number of connectors: 1
• Weight [kg]: 0.01
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 93 3825
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Pistikkontaktide arv: 3
• Temperatuurivahemik kuni [°C]: 125
• Manufacturer: ERA

• Code Letter: G89
• Weight [kg]: 0.009
• Manufacturer: VEMO GERMANY

Vehicle Equipment: for vehicles with automatic climate control, for vehicles with air conditioning General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Üldine informatsioon: speedometer
• Manufacturer: VIKA

• Number of pins: 2
• Weight [kg]: 0.3
• Packaging length [cm]: 12
• Packaging width [cm]: 8
• Packaging height [cm]: 6

• Quantity: 1
• Üldine informatsioon: temperature sensor
• Manufacturer: VIKA

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.015
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Mounting Type: Plugged
• Voltage [V]: 12
• Resistor [Ohm]: 2,080, 322
• Supplementary Article/Supplementary Info: with seal
• Temperature range from [°C]: 25
• Temperature range to [°C]: 80
• Colour: blue
• Sensor Type: NTC Sensor
• Number of pins: 2
• Supplementary Article/Info 2: with retaining ring
• Corresponds to the original part in colour: blue
• Assy./disassy. by qualified personnel required!:
• Name: HE 6PT009107551
• Manufacturer: HELLA

Brief Information: *** HELLA Electronics OE competence for over 60 years.

• Number of connectors: 2
• Colour Coding: grey
• Screw length below head [mm]: 20
• Weight [kg]: 0.03
• Supplementary Article/Supplementary Info: with seal, with retaining spring
• Name: SW 30 92 9318
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year to: 11.1996
• Transmission Type: Automatic Transmission
• Manufacturer: DELLO AUTOMEGA

• Construction Year to: 08.1996
• Pinge [V]: 12
• Piirangutega toode/piirangu info: ilma trossideta
• Pistikkontaktide arv: 2
• Garantii: 3 aastat garantii
• Kaal (kg): 0,02
• Rakendustüüp: elektriline
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: ESEN SKV

Transmission Type: 4-Speed Automatic Transmission, Automatic Transmission

• Housing Colour: grey
• Number of pins: 3
• Spanner Size: 0
• Manufacturer: DELPHI ELEKTRONIKA

• Quantity: 1
• General Information: interior temperature sensor
• Manufacturer: BORSEHUNG

• Keermemõõt: M10 x 1
• Temperatuurivahemik kuni [°C]: 110
• Manufacturer: ERA

• Opening Temperature [°C]: 120
• Number of pins: 3
• Weight [kg]: 0.03
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Number of connectors: 3
• Colour: grey
• Switch Point [°C]: 120
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Engine Code: ABK
• Number of pins: 3
• Warn Temperature [°C]: 125
• Name: EP 1.830.533
• Manufacturer: EPS

• Number of connectors: 3
• Colour: grey
• Switch Point [°C]: 120
• Weight [kg]: 0.02
• Supplementary Article/Info 2: with seal ring
• Name: SW 30 93 7608
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

for OE number: 053919501A

• Model Year from: 1995
• Number of pins: 2
• Weight [kg]: 0.02
• Manufacturer: VEMO

Transmission Type: 5-Speed Manual Transmission, 6-Speed Manual Transmission, 4-Speed Automatic Transmission General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• tootekoodile: 012 409 191 D
• Laius 1 (mm): 72
• Kõrgus 1 (mm): 30
• Pikkus 1 [mm]: 111
• Kaal (g): 28
• Garantii: 3 aastat garantii
• Pistikkontaktide arv: 2
• Manufacturer: AT AUTOTEILE GERMANY

Üldine informatsioon: Products and spare parts supplied by us are only intended for the designated use. Installation may only be carried out by trained specialist personnel. Our products are not always supplied with installation instructions. Improper installation or inappropriate use may lead to the exclusion of warranty.

Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) from: ******4A*T*044454
• Transmission Type: 4-Speed Automatic Transmission
• Number of connectors: 7
• Weight [kg]: 0.12
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Transmission Type: 4-Speed Automatic Transmission
• Pinge [V]: 12
• Kaal (kg): 0,07
• Rakendustüüp: elektriline
• Pistikkontaktide arv: 7
• Garantii: 3 aastat garantii
• Oluline on võrrelda vana uue osaga (eriti OE-numbrit):
• Manufacturer: SKV GERMANY
• Name: CE 96SKV003

• Vehicle Identification Number (VIN) from: 4A-T-044 454
• Transmission Type: 4-Speed Automatic Transmission
• Number of pins: 7
• Weight [kg]: 0.045
• Manufacturer: VEMO

General Information: In the warranty, we always make a distinction between wear parts and vehicle parts. All wear parts are subject to a reduced warranty period and a maximum mileage. Brake components such as brake disks, brake pads, etc. maximum of 1000 km (break-in period). Therefore, warranty claims for brake parts are only reviewed with an installation invoice and a record of the wheel hub run-out measurement, including photos. For brake disks and brake pads, the break-in requirements specified by the vehicle manufacturer must be observed. When replacing brakes, the chassis components must always be checked with regard to clearance and the wheel hub with regard to wobble, and the appropriate documentation must be produced. If the vehicle is no longer in its original condition due to tuning work such as wheel accessories and tracking plates, the entitlement to make warranty claims is lost due to third-party work. The same warranty claims are lost if the vehicle is used for motor sports or similar events.

• Construction Year to: 06.1996
• Manufacturer: BOSCH
• Name: BS 1237031296

• Sensor Type: NTC Sensor
• Mounting Type: Clamped
• Connector Shape: round
• Number of pins: 3
• Temperature range [°C]: 120
• for OE number: 053919501A
• Supplementary Article/Info 2: with seal ring