• Manufacturer: JP GROUP
• Lisainfo: Water Pump
• Additional information: Water Pump

• Lisainfo: Water pump
• Additional information: Water pump

• for OE number: 03L 121 011
• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA

• Number of Teeth: 19
• Water Pump Type: for timing belt drive
• Manufacturer: KAMOKA

• Fabrication Number: CPW-VW-036
• Manufacturer: NTY

• Number of Teeth: 19
• Pulleys: with belt pulley
• Manufacturer: DENCKERMANN POMPY

• Number of Teeth: 19
• Manufacturer: DENCKERMANN ZAWIESZENIE

• Plug housing design: Plug sleeve housing
• Manufacturer Restriction: VAG
• Cable Length [mm]: 500
• Number of pins: 2
• Supplementary Article/Info 2: with pipe
• Cable Cross Section [mm²]: 0.75
• Socket Width [mm]: 1.5
• Temperature range from [°C]: -25
• Temperature range to [°C]: +140
• Cable insulation material: Silicone
• Current carrying capacity [A]: 9
• Operating voltage [V]: 24
• for OE number: 1J6 943 021 B, 1JE 943 021, 1K8 943 021 C
• for article number: 70660022
• SVHC: No SVHC present!
• Name: Kaabli remondikomplekt,
• Manufacturer: HBE

Supplementary Article/Supplementary Info: with socket housing, with gaskets/seals, with heat shrink tubing

• Number of Teeth: 19
• Impeller Diameter [mm]: 63.6
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Name: VEEPUMP
• Manufacturer: MAX

• Number of Teeth: 19
• Manufacturer: JPN

• Water pump impeller material: Sheet Steel
• Number of Teeth: 19
• Overall Height [mm]: 99
• Operating Mode: Mechanical
• Manufacturer: ASHIKA

• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• for OE number: 038 121 011C
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
A3 (8L1), 00-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
A3 (8L1), 00-
(kvaliteediklass: PJ)"

• General Information: water pump
• Manufacturer: VIKA

• Number of Teeth: 19
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of blades/vanes: 7
• Water Pump Pulley Diameter [mm]: 56.23
• Impeller Diameter [mm]: 64
• Water Pump Type: for timing belt drive
• Water pump impeller material: Metal
• Name: VEEPUMP
• Manufacturer: GRA

• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Manufacturer: DRIVE

• General Information: water pump
• Manufacturer: VIKA

• New Part:
• Weight [kg]: 0.78
• Manufacturer: DOLZ
• Name: DO A251

• Vehicle configuration line / variant: TB
• for OE number: 038121011J
• Weight [kg]: 0.9
• Name: VEEPUMP
• Manufacturer: DAY
• Additional information: DP064
• Lisainfo: DP064

• Engine Code: AJM, ATJ
• Manufacturer: MAGNETI MARELLI

• Number of Teeth: 19
• Number of blades/vanes: 8
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
SHARAN
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SHARAN
(kvaliteediklass: PJ)"

• General Information: Water pump; aluminum impeller
• Manufacturer: VIKA

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: VEEPUMP
• Manufacturer: FEB

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Vehicle Identification Number (VIN) from: 8E-2-295 001
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Impeller Diameter [mm]: 64
• Number of blades/vanes: 7
• Operating Mode: Mechanical
• Water pump impeller material: Aluminium
• Supplementary Article/Supplementary Info: with gasket/seal
• Name: Water pump
• Quality class: PJ

Lisainfo: "Tootja: SRL
SUPERB, 02.02-
(kvaliteediklass: PJ)" Additional information: "Tootja: SRL
SUPERB, 02.02-
(kvaliteediklass: PJ)"

• Packaging length [cm]: 11.2
• Packaging width [cm]: 11.2
• Packaging height [cm]: 11.2
• Weight [kg]: 0.76
• Manufacturer: AKSDASIS

• Operating Mode: Mechanical
• Water Pump Type: for timing belt drive
• Supplementary Article/Supplementary Info: with gasket/seal
• Supplementary Article/Info 2: with seal ring
• for OE number: 038 121 011D
• Quality class: PJ
• Name: Water pump

Water pump impeller material: PPS (polyphen. sulfide)/TFE (tetrafluoroet.)/ACM (polyacryl)

• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• Supplementary Article/Supplementary Info: with gasket/seal
• SVHC: No SVHC present!
• Name: VEEPUMP
• Manufacturer: INA

• Construction Year to: 11.2000
• Engine Code: AJM, ATJ
• Manufacturer: MAGNETI MARELLI

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Name: SW 32 92 4360
• Manufacturer: SWAG

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Weight [kg]: 0.793
• Packaging length [cm]: 13
• Packaging width [cm]: 13
• Packaging height [cm]: 16
• Supplementary Article/Supplementary Info: with gasket/seal
• Manufacturer: CONTITECH

• Material: Aluminium
• General Information: Water pump; aluminum impeller
• Manufacturer: VIKA

• General Information: water pump
• Manufacturer: VIKA

• Water pump impeller material: Metal
• Seal Material: Rubber
• Number of grooves: 19
• Material: Cast Aluminium
• Number of Teeth: 19
• Number of blades/vanes: 8
• Weight [kg]: 0.717
• Supplementary Article/Info 2: with seal ring
• Observe service information:
• Manufacturer: BLUE PRINT SILNIK

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Impeller Diameter [mm]: 63.6
• Water Pump Type: for timing belt drive
• Water pump impeller material: Plastic
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Technical Information: SKF Aquamax
• Name: VEEPUMP
• Manufacturer: SKF

• Vehicle Identification Number (VIN) to: 8E-2-295 000
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Impeller Diameter [mm]: 64
• Number of blades/vanes: 7
• Water pump impeller material: Metal
• old version:
• Manufacturer: HEPU

• Vehicle Identification Number (VIN) to: 8E-2-295 000
• Operating Mode: Mechanical
• Supplementary Article/Info 2: with seal ring
• Number of Teeth: 19
• Water Pump Pulley Diameter [mm]: 56
• Impeller Diameter [mm]: 64
• Number of blades/vanes: 7
• Water pump impeller material: Metal
• Manufacturer: HEPU

• Operating Mode: Electric
• Rated Voltage [V]: 12
• Number of pins: 2
• Vehicle Equipment: for vehicles with auxiliary water pump
• Connector Shape: D Shape
• Housing Colour: black
• Hose Diameter [mm]: 20
• Supplementary Article/Info 2: with rubber mount
• Housing Type: Synthetic Material Housing
• Observe system fill quantity:
• Consult accessories list for recommended additional repairs:
• Manufacturer: TOPRAN HANS PRIES

General Information: Any and all spare parts we supply are solely intended for the designated purpose as defined by us. Installation by trained personnel only. Our products are usually supplied without assembly instructions. Installation in vehicles other than those specified by us may lead to the exclusion of warranty.

• Supplementary Article/Info 2: without lid
• Supplementary Article/Supplementary Info: with gaskets/seals
• Number of Teeth: 19
• Belt Pulley Ø [mm]: 56.2
• Manufacturer: VALEO

• Supplementary Article/Supplementary Info: with gasket/seal
• Water Pump Type: for timing belt drive
• Number of Teeth: 19
• reinforced version:
• Observe service information:
• Quality: Sealed with SiC/SiC
• Water pump impeller material: Metal
• New part without deposit:
• Article number of the recommended special tool: 999 990 0002
• Housing material: Stainless Steel
• Chemical Properties: High temperature-resistant
• Name: VEEPUMP
• Manufacturer: MEY

General Information: Water pump bearing in OE quality, according to application: 4-point roller/ball: Best distribution of high radial forces as well as increased axial support or Angular contact: Absorption of axial and medium radial forces as well as increased axial support.

• Engine Code: AJM, ATJ
• Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) from: 8D-X-200 001
• Voltage [V]: 12
• Guarantee: 3 years guarantee
• Weight [kg]: 0.43
• Material: Plastic
• Number of connectors: 2
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 22SKV064

• Voltage [V]: 12
• Operating Mode: Electric
• Number of pins: 2
• Guarantee: 3 years guarantee
• Weight [kg]: 0.42
• Always compare old and new part (in particular OE No.):
• Manufacturer: SKV GERMANY
• Name: CE 22SKV010

• Quantity: 1
• General Information: additional coolant pump
• Manufacturer: VIKA

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -ATJ # ATJ
• Number of Teeth: 120
• Width [mm]: 30
• Length [mm]: 1,143
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 2.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY
• Additional information: KTBWP3423 DAYCO
• Lisainfo: KTBWP3423 DAYCO

• Engine Code: AJM
• Width [mm]: 30
• Water pump impeller material: Metal
• Number of Teeth: 120
• Belts: with rounded tooth profile
• Weight [kg]: 1.8
• for OE number: 038 198 119 S1
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of Teeth: 120
• Width [mm]: 30
• Number of belts: 1
• Weight [kg]: 2.28
• for article number: A251
• Manufacturer: DOLZ

• Vehicle Identification Number (VIN) to: 8E2295000
• Supplementary Article/Info 2: without tensioner pulley damper
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Water Pump Type: for timing belt drive
• Manufacturer: METELLI ROZRZAD

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -ATJ # ATJ
• Number of Teeth: 120
• Width [mm]: 30
• Length [mm]: 1,143
• Number of belts: 1
• Pulleys contained: 2
• Weight [kg]: 2.1
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: DAY

• Engine Code: AJM
• Length [mm]: 1,143
• Number of Teeth: 120
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 2
• Supplementary Article/Info 2: without tensioner element
• Manufacturer: BOSCH ROZRZAD/PASKI

• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Observe service information:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA

• Vehicle type: W/O DAMPER
• Weight [kg]: 2.06
• Number of belts: 1
• Name: AI WPK-199805
• Manufacturer: AIRTEX

• Construction Year from: 12.1998
• Construction Year to: 09.2001
• Driven Units: Camshaft
• Supplementary Article/Info 2: without tensioner pulley damper
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Vehicle Identification Number (VIN) from: ******8D*X*200001
• Voltage [V]: 12
• Number of connectors: 2
• Material: Plastic
• Weight [kg]: 0.32
• for OE number: 078 121 601 B
• Observe service information:
• Manufacturer: FEBI

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Number of belts: 1
• Number of track rollers: 2
• Width 1 [mm]: 30
• Number of Teeth: 120
• Manufacturer: SNR
• Name: SN KDP457.270

• Engine Code: AJM, ATJ
• Number of ribs: 120
• Length [mm]: 1,143
• Width [mm]: 30
• Number of Teeth: 120
• Manufacturer: MAGNETI MARELLI

• Vehicle Identification Number (VIN) to: 8E-2-295 000
• Number of belts: 1
• Width [mm]: 30
• Number of Teeth: 120
• Supplementary Article/Info 2: without tensioner pulley damper
• Alternatively:
• Manufacturer: HEPU

• Driven Units: Camshaft
• Packaging length [cm]: 19.5
• Packaging width [cm]: 18.2
• Packaging height [cm]: 18.7
• Number of Teeth: 120
• Weight [kg]: 1.999
• Width [mm]: 30
• Name: Veepump hammasrihmakomplekt
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)

• Number of Teeth: 120
• Width [mm]: 30
• Number of belts: 1
• for article number: 570059N
• Packaging length [cm]: 28
• Packaging width [cm]: 17.5
• Packaging height [cm]: 17.5
• Weight [kg]: 1.822
• Manufacturer: AKSDASIS

• Vehicle Identification Number (VIN) from: 8E-2-295 001
• Number of belts: 1
• Width [mm]: 30
• Number of Teeth: 120
• Pulleys contained: 2
• Supplementary Article/Info 2: without tensioner pulley damper
• Alternatively:
• Manufacturer: HEPU

• Number of belts: 1
• Width 1 [mm]: 30
• Number of track rollers: 3
• Number of Teeth: 120
• Manufacturer: SNR
• Name: SN KDP457.540

• Alternatively:
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Observe service information:
• SVHC: No SVHC present!
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: INA
• Lisainfo: 530009030
• Additional information: 530009030

• Number of Teeth: 120
• Width [mm]: 30
• for article number: A251
• Manufacturer: DOLZ
• Name: DO KD037

• Article number of the recommended special tool: VKN 1000
• Number of bolts/screws: 1
• Water pump impeller material: Plastic
• Belt Width [mm]: 30
• Supplementary Article/Supplementary Info: with gaskets/seals
• Supplementary Article/Info 2: with tensioner pulley damper, with studs
• Number of Teeth: 120
• Belts: with rounded tooth profile
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: SKF

• Driven Units: Camshaft
• Vehicle configuration line / variant: HT -KTBWP
• Number of Teeth: 120
• Width [mm]: 30
• Length [mm]: 1,143
• Number of belts: 1
• Pulleys contained: 3
• Weight [kg]: 2.5
• Manufacturer: DAYCO
• Name: DA KTBWP4153

• Vehicle Identification Number (VIN) to: 8E2295000
• Supplementary Article/Info 2: with tensioner pulley damper
• Number of Teeth 1: 120
• Width 1 [mm]: 30
• Water Pump Type: for timing belt drive
• Manufacturer: METELLI ROZRZAD

• Width [mm]: 30
• Water pump impeller material: Metal
• Number of Teeth: 120
• Weight [kg]: 2.138
• Observe service information:
• Manufacturer: FEBI BILSTEIN

General Information: These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.

• Construction Year from: 12.1998
• Construction Year to: 09.2001
• Driven Units: Camshaft
• Supplementary Article/Info 2: with tensioner pulley damper
• Article number of the recommended special tool: GAT4840A, GAT4844, GAT4741
• Supplementary Article/Supplementary Info: with water pump
• Observe technical data:
• Name: Veepump hammasrihmakomplekt
• Manufacturer: GAT

• Vehicle Identification Number (VIN) to: 8E-2-295 000
• Number of belts: 1
• Pulleys contained: 2
• Width [mm]: 30
• Number of Teeth: 120
• Supplementary Article/Info 2: with tensioner pulley damper
• Alternatively:
• Manufacturer: HEPU

• Engine Code: AJM
• Length [mm]: 1,143
• Number of Teeth: 120
• Width [mm]: 30
• Tooth Pitch [mm]: 9.525
• Pulleys contained: 2
• Supplementary Article/Info 2: with tensioner pulley damper
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: BOS

• Engine Code: AJM, ATJ
• Number of ribs: 120
• Length [mm]: 1,143
• Width [mm]: 30
• Number of Teeth: 120
• Manufacturer: MAGNETI MARELLI

• Driven Units: Camshaft
• Packaging length [cm]: 23.5
• Packaging width [cm]: 19.5
• Packaging height [cm]: 20.9
• Number of Teeth: 120
• Weight [kg]: 2.45
• Width [mm]: 30
• Supplementary Article/Info 2: with tensioner pulley damper
• Name: VEEPUMP HAMMASRIHMAKOMPLEKT
• Manufacturer: CON

Technical Information: Appropriate crankshaft bolt(s) available separately. See section belt pulley crankshaft (bolt set)